lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] can: sja1000: plx_pci: fix error handling path in plx_pci_add_card()
Date
If pci_iomap() or register_sja1000dev() fails, netdev will not be
registered, but plx_pci_del_card() still deregisters the netdev.

To avoid this, let's free the netdev and clear card->net_dev[i] before
calling plx_pci_del_card(). In addition, add the missing pci_iounmap()
when the channel does not exist.

Compile tested only.

Fixes: 951f2f960e5b ("drivers/net/can/sja1000/plx_pci.c: eliminate double free")
Fixes: 24c4a3b29255 ("can: add support for CAN interface cards based on the PLX90xx PCI bridge")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
---
v1->v2: switch to goto style fix.

drivers/net/can/sja1000/plx_pci.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)

diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 5de1ebb..134a8cb 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -678,7 +678,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
if (!addr) {
err = -ENOMEM;
dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
- goto failure_cleanup;
+ goto failure_free_dev;
}

priv->reg_base = addr + cm->offset;
@@ -699,7 +699,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
if (err) {
dev_err(&pdev->dev, "Registering device failed "
"(err=%d)\n", err);
- goto failure_cleanup;
+ goto failure_iounmap;
}

card->channels++;
@@ -710,6 +710,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
} else {
dev_err(&pdev->dev, "Channel #%d not detected\n",
i + 1);
+ pci_iounmap(pdev, priv->reg_base);
free_sja1000dev(dev);
card->net_dev[i] = NULL;
}
@@ -738,6 +739,11 @@ static int plx_pci_add_card(struct pci_dev *pdev,
}
return 0;

+failure_iounmap:
+ pci_iounmap(pdev, priv->reg_base);
+failure_free_dev:
+ free_sja1000dev(dev);
+ card->net_dev[i] = NULL;
failure_cleanup:
dev_err(&pdev->dev, "Error: %d. Cleaning Up.\n", err);

--
2.9.5
\
 
 \ /
  Last update: 2022-11-25 14:29    [W:0.049 / U:0.068 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site