Messages in this thread Patch in this message | | | From | Maxime Chevallier <> | Subject | [PATCH net-next 2/3] net: pcs: altera-tse: don't set the speed for 1000BaseX | Date | Fri, 25 Nov 2022 14:18:00 +0100 |
| |
When disabling the SGMII mode bit, the PCS defaults to 1000BaseX mode. In that mode, we don't need to set the speed since it's always 1000Mbps.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com> --- drivers/net/pcs/pcs-altera-tse.c | 1 - 1 file changed, 1 deletion(-)
diff --git a/drivers/net/pcs/pcs-altera-tse.c b/drivers/net/pcs/pcs-altera-tse.c index e86cadc391e8..be65271ff5de 100644 --- a/drivers/net/pcs/pcs-altera-tse.c +++ b/drivers/net/pcs/pcs-altera-tse.c @@ -102,7 +102,6 @@ static int alt_tse_pcs_config(struct phylink_pcs *pcs, unsigned int mode, if_mode |= PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA; } else if (interface == PHY_INTERFACE_MODE_1000BASEX) { if_mode &= ~(PCS_IF_MODE_USE_SGMII_AN | PCS_IF_MODE_SGMII_ENA); - if_mode |= PCS_IF_MODE_SGMI_SPEED_1000; } ctrl |= (BMCR_SPEED1000 | BMCR_FULLDPLX | BMCR_ANENABLE); -- 2.38.1
| |