lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[RFC PATCH v2 1/3] dt-bindings: phy: qcom,qmp-usb3-dp: Add sm6350 compatible
Date
Add the compatible describing the combo phy found on SM6350.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
---
@Johan Hovold, I've sent this v2 as RFC because there are several things
where I have questions on how it should be done.

In this patch, you can see there's cfg_ahb (&xo_board) and power-domains
is not set. In msm-4.19 &gcc_usb30_prim_gdsc is only used in the
ssusb@a600000 node, or should I also add it to qmpphy?

.../bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index 6f31693d9868..3e39e3e0504d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -17,16 +17,18 @@ properties:
compatible:
enum:
- qcom,sc8280xp-qmp-usb43dp-phy
+ - qcom,sm6350-qmp-usb3-dp-phy

reg:
maxItems: 1

clocks:
- maxItems: 4
+ maxItems: 5

clock-names:
items:
- const: aux
+ - const: cfg_ahb
- const: ref
- const: com_aux
- const: usb3_pipe
@@ -61,7 +63,6 @@ required:
- reg
- clocks
- clock-names
- - power-domains
- resets
- reset-names
- vdda-phy-supply
--
2.38.1
\
 
 \ /
  Last update: 2022-11-25 10:29    [W:0.101 / U:0.632 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site