lkml.org 
[lkml]   [2022]   [Nov]   [25]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH v2] can: mcba_usb: Fix termination command argument
From
Date
Hello:

This patch was applied to netdev/net.git (master)
by Marc Kleine-Budde <mkl@pengutronix.de>:

On Fri, 25 Nov 2022 00:25:03 +0900 you wrote:
> Microchip USB Analyzer can activate the internal termination resistors
> by setting the "termination" option ON, or OFF to to deactivate them.
> As I've observed, both with my oscilloscope and captured USB packets
> below, you must send "0" to turn it ON, and "1" to turn it OFF.
>
> >From the schematics in the user's guide, I can confirm that you must
> drive the CAN_RES signal LOW "0" to activate the resistors.
>
> [...]

Here is the summary with links:
- [v2] can: mcba_usb: Fix termination command argument
https://git.kernel.org/netdev/net/c/1a8e3bd25f1e

You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html


\
 
 \ /
  Last update: 2022-11-25 09:01    [W:0.034 / U:0.716 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site