lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [RFC PATCH] net: devlink: devlink_nl_info_fill: populate default information
On Thu. 24 Nov. 2022 at 12:06, Jakub Kicinski <kuba@kernel.org> wrote:
> On Wed, 23 Nov 2022 18:42:41 +0900 Vincent MAILHOL wrote:
> > I see three solutions:
> >
> > 1/ Do it in the core, clean up all drivers using
> > devlink_info_driver_name_put() and make the function static (i.e.
> > forbid the drivers to set the driver name themselves).
> > N.B. This first solution does not work for
> > devlink_info_serial_number_put() because the core will not always be
> > able to provide a default value (e.g. my code only covers USB
> > devices).
> >
> > 2/ Keep track of which attribute is already set (as you suggested).
> >
> > 3/ Do a function devlink_nl_info_fill_default() and let the drivers
> > choose to either call that function or set the attributes themselves.
> >
> > I would tend to go with a mix of 1/ and 2/.
>
> I think 2/ is best because it will generalize to serial numbers while
> 1/ will likely not. 3/ is a smaller gain.
>
> Jiri already plumbed thru the struct devlink_info_req which is on the
> stack of the caller, per request, so we can add the bool / bitmap for
> already reported items there quite easily.

Sorry, let me clarify the next actions. Are you meaning that Jiri is
already working on the bitmap implementation and should I wait for his
patches first? Or do you expect me to do it?

\
 
 \ /
  Last update: 2022-11-24 06:34    [W:0.311 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site