lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Date
Subject[PATCH v3 1/2] earlycon: Let users set the clock frequency
Some platforms, namely AMD Picasso, use non standard uart clocks (48M),
witch makes it impossible to use with earlycon.

Let the user select its own frequency.

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index a465d5242774..9efb6c3b0486 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1182,10 +1182,10 @@
specified, the serial port must already be setup and
configured.

- uart[8250],io,<addr>[,options]
- uart[8250],mmio,<addr>[,options]
- uart[8250],mmio32,<addr>[,options]
- uart[8250],mmio32be,<addr>[,options]
+ uart[8250],io,<addr>[,options[,uartclk]]
+ uart[8250],mmio,<addr>[,options[,uartclk]]
+ uart[8250],mmio32,<addr>[,options[,uartclk]]
+ uart[8250],mmio32be,<addr>[,options[,uartclk]]
uart[8250],0x<addr>[,options]
Start an early, polled-mode console on the 8250/16550
UART at the specified I/O port or MMIO address.
@@ -1194,7 +1194,9 @@
If none of [io|mmio|mmio32|mmio32be], <addr> is assumed
to be equivalent to 'mmio'. 'options' are specified
in the same format described for "console=ttyS<n>"; if
- unspecified, the h/w is not initialized.
+ unspecified, the h/w is not initialized. 'uartclk' is
+ the uart clock frequency; if unspecified, it is set
+ to 'BASE_BAUD' * 16.

pl011,<addr>
pl011,mmio32,<addr>
diff --git a/drivers/tty/serial/earlycon.c b/drivers/tty/serial/earlycon.c
index a5f380584cda..3a0c88419b6c 100644
--- a/drivers/tty/serial/earlycon.c
+++ b/drivers/tty/serial/earlycon.c
@@ -120,7 +120,13 @@ static int __init parse_options(struct earlycon_device *device, char *options)
}

if (options) {
+ char *uartclk;
+
device->baud = simple_strtoul(options, NULL, 0);
+ uartclk = strchr(options, ',');
+ if (uartclk && kstrtouint(uartclk + 1, 0, &port->uartclk) < 0)
+ pr_warn("[%s] unsupported earlycon uart clkrate option\n",
+ options);
length = min(strcspn(options, " ") + 1,
(size_t)(sizeof(device->options)));
strscpy(device->options, options, length);
@@ -139,7 +145,8 @@ static int __init register_earlycon(char *buf, const struct earlycon_id *match)
buf = NULL;

spin_lock_init(&port->lock);
- port->uartclk = BASE_BAUD * 16;
+ if (!port->uartclk)
+ port->uartclk = BASE_BAUD * 16;
if (port->mapbase)
port->membase = earlycon_map(port->mapbase, 64);

--
b4 0.11.0-dev-d93f8

\
 
 \ /
  Last update: 2022-11-24 13:41    [W:0.073 / U:0.388 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site