lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v6 2/7] platform/chrome: cros_ec_typec: Purge blocking switch devlinks
Date
From: Prashant Malani <pmalani@chromium.org>

When using OF graph, the fw_devlink code will create links between the
individual port driver (cros-ec-typec here) and the parent device for
a Type-C switch (like mode-switch). Since the mode-switch will in turn
have the usb-c-connector (i.e the child of the port driver) as a
supplier, fw_devlink will not be able to resolve the cyclic dependency
correctly.

As a result, the mode-switch driver probe() never runs, so mode-switches
are never registered. Because of that, the port driver probe constantly
fails with -EPROBE_DEFER, because the Type-C connector class requires all
switch devices to be registered prior to port registration.

To break this deadlock and allow the mode-switch registration to occur,
purge all the usb-c-connector nodes' absent suppliers. This eliminates
the connector as a supplier for a switch and allows it to be probed.

Signed-off-by: Prashant Malani <pmalani@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
---

Changes in v6:
- New in v6

drivers/platform/chrome/cros_ec_typec.c | 9 +++++++++
1 file changed, 9 insertions(+)

diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index 2a7ff14dc37e..f74e01d18ef3 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -382,6 +382,15 @@ static int cros_typec_init_ports(struct cros_typec_data *typec)
return -EINVAL;
}

+ /*
+ * OF graph may have set up some device links with switches, since connectors have their
+ * own compatible. Purge these to avoid a deadlock in switch probe (the switch mistakenly
+ * assumes the connector is a supplier).
+ */
+ if (dev->of_node)
+ device_for_each_child_node(dev, fwnode)
+ fw_devlink_purge_absent_suppliers(fwnode);
+
/* DT uses "reg" to specify port number. */
port_prop = dev->of_node ? "reg" : "port-number";
device_for_each_child_node(dev, fwnode) {
--
2.38.1.584.g0f3c55d4c2-goog
\
 
 \ /
  Last update: 2022-11-24 11:22    [W:0.150 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site