lkml.org 
[lkml]   [2022]   [Nov]   [24]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] dt-bindings: media: amphion: use hyphen in node name of vpu core
From
Rob, can you Ack (or nack) this old patch? It looks like it was
missed, most likely because the devicetree ML wasn't CCed.

Regards,

Hans

On 11/04/2022 09:48, Ming Qian wrote:
> Hyphen is recommended in node name than underscore.
> So change the node name from "vpu_core" to "vpu-core"
>
> Signed-off-by: Ming Qian <ming.qian@nxp.com>
> ---
> Documentation/devicetree/bindings/media/amphion,vpu.yaml | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/media/amphion,vpu.yaml b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
> index a9d80eaeeeb6..c0d83d755239 100644
> --- a/Documentation/devicetree/bindings/media/amphion,vpu.yaml
> +++ b/Documentation/devicetree/bindings/media/amphion,vpu.yaml
> @@ -47,7 +47,7 @@ patternProperties:
> $ref: ../mailbox/fsl,mu.yaml#
>
>
> - "^vpu_core@[0-9a-f]+$":
> + "^vpu-core@[0-9a-f]+$":
> description:
> Each core correspond a decoder or encoder, need to configure them
> separately. NXP i.MX8QM SoC has one decoder and two encoder, i.MX8QXP SoC
> @@ -143,7 +143,7 @@ examples:
> power-domains = <&pd IMX_SC_R_VPU_MU_2>;
> };
>
> - vpu_core0: vpu_core@2d080000 {
> + vpu_core0: vpu-core@2d080000 {
> compatible = "nxp,imx8q-vpu-decoder";
> reg = <0x2d080000 0x10000>;
> power-domains = <&pd IMX_SC_R_VPU_DEC_0>;
> @@ -154,7 +154,7 @@ examples:
> memory-region = <&decoder_boot>, <&decoder_rpc>;
> };
>
> - vpu_core1: vpu_core@2d090000 {
> + vpu_core1: vpu-core@2d090000 {
> compatible = "nxp,imx8q-vpu-encoder";
> reg = <0x2d090000 0x10000>;
> power-domains = <&pd IMX_SC_R_VPU_ENC_0>;
> @@ -165,7 +165,7 @@ examples:
> memory-region = <&encoder1_boot>, <&encoder1_rpc>;
> };
>
> - vpu_core2: vpu_core@2d0a0000 {
> + vpu_core2: vpu-core@2d0a0000 {
> reg = <0x2d0a0000 0x10000>;
> compatible = "nxp,imx8q-vpu-encoder";
> power-domains = <&pd IMX_SC_R_VPU_ENC_1>;

\
 
 \ /
  Last update: 2022-11-24 09:49    [W:0.079 / U:0.080 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site