lkml.org 
[lkml]   [2022]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 1/5] exfat: reduce the size of exfat_entry_set_cache
Hi, Yuezhang Mo,

> In normal, there are 19 directory entries at most for a file or
> a directory.
> - A file directory entry
> - A stream extension directory entry
> - 1~17 file name directory entry
>
> So the directory entries are in 3 sectors at most, it is enough
> for struct exfat_entry_set_cache to pre-allocate 3 bh.
>
> This commit changes the size of struct exfat_entry_set_cache as:
>
> Before After
> 32-bit system 88 32 bytes
> 64-bit system 168 48 bytes
>
> Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
> Reviewed-by: Andy Wu <Andy.Wu@sony.com>
> Reviewed-by: Aoyama Wataru <wataru.aoyama@sony.com>
> ---
> fs/exfat/exfat_fs.h | 24 ++++++++++++++++++++----
> 1 file changed, 20 insertions(+), 4 deletions(-)
>
> diff --git a/fs/exfat/exfat_fs.h b/fs/exfat/exfat_fs.h
> index a8f8eee4937c..7d2493cda5d8 100644
> --- a/fs/exfat/exfat_fs.h
> +++ b/fs/exfat/exfat_fs.h
> @@ -9,6 +9,7 @@
> #include <linux/fs.h>
> #include <linux/ratelimit.h>
> #include <linux/nls.h>
> +#include <linux/blkdev.h>
>
> #define EXFAT_ROOT_INO 1
>
> @@ -41,6 +42,14 @@ enum {
> #define ES_2_ENTRIES 2
> #define ES_ALL_ENTRIES 0
>
> +#define ES_FILE_ENTRY 0
> +#define ES_STREAM_ENTRY 1
> +#define ES_FIRST_FILENAME_ENTRY 2

New ES_ definitions seem to be an index in an entry set. However, this
is confusing with definitions for specifying the range used when
obtaining an entry set, such as ES_2_ENTRIES or ES_ALL_ENTRIES.
Therefore, it would be better to use ES_IDX_ instead of ES_ to
distinguish names such as ES_IDX_FILE, ES_IDX_STREAM and so on.
(If you can think of a better prefix, it doesn't have to be ES_IDX_)

> +#define EXFAT_FILENAME_ENTRY_NUM(name_len) \
> + DIV_ROUND_UP(name_len, EXFAT_FILE_NAME_LEN)
> +#define ES_LAST_FILENAME_ENTRY(name_len) \
> + (ES_FIRST_FILENAME_ENTRY + EXFAT_FILENAME_ENTRY_NUM(name_len))
> +
As with the newly defined ES_ value above, it makes sense for the
ES_LAST_FILENAME_ENTRY() MACRO to return the index of the last filename
entry. So let's subtract 1 from the current MACRO.

> #define DIR_DELETED 0xFFFF0321
>
> /* type values */
> @@ -68,9 +77,6 @@ enum {
> #define MAX_NAME_LENGTH 255 /* max len of file name excluding NULL */
> #define MAX_VFSNAME_BUF_SIZE ((MAX_NAME_LENGTH + 1) * MAX_CHARSET_SIZE)
>
> -/* Enough size to hold 256 dentry (even 512 Byte sector) */
> -#define DIR_CACHE_SIZE (256*sizeof(struct exfat_dentry)/512+1)
> -
> #define EXFAT_HINT_NONE -1
> #define EXFAT_MIN_SUBDIR 2
>
> @@ -125,6 +131,16 @@ enum {
> #define BITS_PER_BYTE_MASK 0x7
> #define IGNORED_BITS_REMAINED(clu, clu_base) ((1 << ((clu) - (clu_base))) - 1)
>
> +/* 19 entries = 1 file entry + 1 stream entry + 17 filename entries */
> +#define ES_MAX_ENTRY_NUM ES_LAST_FILENAME_ENTRY(MAX_NAME_LENGTH)

Of course, it needs to add 1 here.

> +
> +/*
> + * 19 entries x 32 bytes/entry = 608 bytes.
> + * The 608 bytes are in 3 sectors at most (even 512 Byte sector).
> + */
> +#define DIR_CACHE_SIZE \
> + (DIV_ROUND_UP(EXFAT_DEN_TO_B(ES_MAX_ENTRY_NUM), SECTOR_SIZE) + 1)
> +
> struct exfat_dentry_namebuf {
> char *lfn;
> int lfnbuf_len; /* usually MAX_UNINAME_BUF_SIZE */
> @@ -166,11 +182,11 @@ struct exfat_hint {
>
> struct exfat_entry_set_cache {
> struct super_block *sb;
> - bool modified;
> unsigned int start_off;
> int num_bh;
> struct buffer_head *bh[DIR_CACHE_SIZE];
> unsigned int num_entries;
> + bool modified;
> };
>
> struct exfat_dir_entry {

\
 
 \ /
  Last update: 2022-11-23 14:56    [W:0.064 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site