lkml.org 
[lkml]   [2022]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH V1] PCI/ASPM: Save/restore L1SS Capability for suspend/resume

For #2, you mean "S3 suspend"? My normally solid machine is hit-or-
miss on coming out of S3 suspend lately but that could be related
to me running Linus' master.

Should I try out "Dubious Patch #1"? I lose a %age/hr in S3.

-Kenny

On Wed, 23 Nov 2022, Matthias Kaehlcke wrote:

> Hi,
>
> not sure this is the best thread to reply to, but we are also
> observing suspend issues with the same Kioxia NVMe on a platform
> with a Qualcomm sc7280 SoC. The system runs a v5.15 downstream
> kernel which includes most (post v5.15) ASPM patches from
> upstream.
>
> There are two issues with the Kioxia NVMe:
>
> 1. Power consumption is high unless a LTR_L1.2_THRESHOLD of 0ns
> is configured (related dubious patch: [1])
>
> 2. The system often hangs on resume unless a longer delay is
> added in the suspend pass. QC engineers say that the NVMe is
> taking so much time to settle in L1ss.
>
> Other NVMe models don't exhibit power or suspend issues on this
> platform, except for one model which also needs a shorter
> delay during suspend, otherwise the system will hang
> occasionally upon resume.
>
> The second issue could possibly be 'fixed' with a quirk for
> the Kioxia NVMe model, though it seems the issue is not seen on
> all platforms, apparently the delay is not needed on Kenny's
> system.
>
> I'm currently a bit at a loss with the first issue. The patch
> mentioned above claims that the (no-)snoop latencies are
> involved, which may or may not be true. In this thread I saw
> Kenny posting 'lspci' output from his (now) working system.
> I noticed max (no-)snoop values of 3145728ns, which seems to
> be some sort of default (programmed) max. On my system these
> values are 0ns, which is the default value of the registers.
> I tried to set these to 3146us from the kernel to see if that
> makes a difference, but could only successfully update the max
> snoop latency, but not non-snoop (maybe this can be only done
> at early initialization time?). With just the max snoop latency
> set to 3146us power consumption of the NVMe remains high.
>
> The output of lspci from my system is attached.
>
> In this thread it was mentioned that possibly a BIOS update
> fixed the issue Kenny was seeing. What kind of values is
> the BIOS supposed to adjust (I'm a PCI n00b)?
>
> Any suggestions about what else to try?
>
> Thanks
>
> m.
>
> [1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1663315719-21563-1-git-send-email-quic_krichai@quicinc.com/
>
> ---
>
> 0001:00:00.0 PCI bridge: Qualcomm Device 010b (prog-if 00 [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 183
> IOMMU group: 0
> Region 0: Memory at 40700000 (32-bit, non-prefetchable) [size=4K]
> Bus: primary=00, secondary=01, subordinate=ff, sec-latency=0
> I/O behind bridge: 00001000-00001fff [size=4K]
> Memory behind bridge: 40300000-404fffff [size=2M]
> Prefetchable memory behind bridge: 0000000040500000-00000000406fffff [size=2M]
> Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
> BridgeCtl: Parity- SERR+ NoISA- VGA- VGA16- MAbort- >Reset- FastB2B-
> PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
> Capabilities: [40] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [50] MSI: Enable+ Count=1/32 Maskable+ 64bit+
> Address: 00000000fffff000 Data: 0000
> Masking: fffffffe Pending: 00000000
> Capabilities: [70] Express (v2) Root Port (Slot+), MSI 00
> DevCap: MaxPayload 128 bytes, PhantFunc 0
> ExtTag- RBE+
> DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend-
> LnkCap: Port #0, Speed 8GT/s, Width x2, ASPM L0s L1, Exit Latency L0s <1us, L1 <64us
> ClockPM- Surprise- LLActRep+ BwNot- ASPMOptComp+
> LnkCtl: ASPM L0s L1 Enabled; RCB 128 bytes, Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 8GT/s (ok), Width x2 (ok)
> TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
> SltCap: AttnBtn+ PwrCtrl+ MRL+ AttnInd+ PwrInd+ HotPlug+ Surprise+
> Slot #0, PowerLimit 0.000W; Interlock+ NoCompl-
> SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
> Control: AttnInd Off, PwrInd Off, Power- Interlock-
> SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
> Changed: MRL- PresDet- LinkState-
> RootCap: CRSVisible-
> RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
> RootSta: PME ReqID 0000, PMEStatus- PMEPending-
> DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP+ LTR+
> 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix-
> EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
> FRS- LN System CLS Not Supported, TPHComp+ ExtTPHComp- ARIFwd-
> AtomicOpsCap: Routing- 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled, ARIFwd-
> AtomicOpsCtl: ReqEn- EgressBlck-
> LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
> EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
> Retimer- 2Retimers- CrosslinkRes: unsupported
> Capabilities: [100 v2] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn-
> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> HeaderLog: 00000000 00000000 00000000 00000000
> RootCmd: CERptEn- NFERptEn- FERptEn-
> RootSta: CERcvd- MultCERcvd- UERcvd- MultUERcvd-
> FirstFatal- NonFatalMsg- FatalMsg- IntMsg 0
> ErrorSrc: ERR_COR: 0000 ERR_FATAL/NONFATAL: 0000
> Capabilities: [148 v1] Secondary PCI Express
> LnkCtl3: LnkEquIntrruptEn- PerformEqu-
> LaneErrStat: 0
> Capabilities: [168 v1] Transaction Processing Hints
> No steering table available
> Capabilities: [1fc v1] L1 PM Substates
> L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+
> PortCommonModeRestoreTime=70us PortTPowerOnTime=0us
> L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> T_CommonMode=70us LTR1.2_Threshold=86016ns
> L1SubCtl2: T_PwrOn=10us
> Kernel driver in use: pcieport
>
> 0001:01:00.0 Non-Volatile memory controller: KIOXIA Corporation Device 0001 (prog-if 02 [NVM Express])
> Subsystem: KIOXIA Corporation Device 0001
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 0
> Interrupt: pin A routed to IRQ 182
> IOMMU group: 0
> Region 0: Memory at 40300000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: [40] Express (v2) Endpoint, MSI 00
> DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
> ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W
> DevCtl: CorrErr- NonFatalErr- FatalErr- UnsupReq-
> RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset-
> MaxPayload 128 bytes, MaxReadReq 512 bytes
> DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
> LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L0s L1, Exit Latency L0s <2us, L1 <32us
> ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+
> LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes, Disabled- CommClk+
> ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> LnkSta: Speed 8GT/s (ok), Width x2 (downgraded)
> TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> DevCap2: Completion Timeout: Range AB, TimeoutDis+ NROPrPrP- LTR+
> 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt+ EETLPPrefix-
> EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit-
> FRS- TPHComp- ExtTPHComp-
> AtomicOpsCap: 32bit- 64bit- 128bitCAS-
> DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ OBFF Disabled,
> AtomicOpsCtl: ReqEn-
> LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS-
> LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
> Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
> Compliance De-emphasis: -6dB
> LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+
> EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest-
> Retimer- 2Retimers- CrosslinkRes: unsupported
> Capabilities: [80] Power Management version 3
> Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-)
> Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
> Capabilities: [90] MSI: Enable- Count=1/32 Maskable+ 64bit+
> Address: 0000000000000000 Data: 0000
> Masking: 00000000 Pending: 00000000
> Capabilities: [b0] MSI-X: Enable+ Count=32 Masked-
> Vector table: BAR=0 offset=00002000
> PBA: BAR=0 offset=00003000
> Capabilities: [100 v2] Advanced Error Reporting
> UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
> UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
> CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
> CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
> AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
> MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
> HeaderLog: 00000000 00000000 00000000 00000000
> Capabilities: [150 v1] Virtual Channel
> Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> Arb: Fixed- WRR32- WRR64- WRR128-
> Ctrl: ArbSelect=Fixed
> Status: InProgress-
> VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
> Status: NegoPending- InProgress-
> Capabilities: [260 v1] Latency Tolerance Reporting
> Max snoop latency: 0ns
> Max no snoop latency: 0ns
> Capabilities: [300 v1] Secondary PCI Express
> LnkCtl3: LnkEquIntrruptEn- PerformEqu-
> LaneErrStat: 0
> Capabilities: [400 v1] L1 PM Substates
> L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1- L1_PM_Substates+
> PortCommonModeRestoreTime=60us PortTPowerOnTime=10us
> L1SubCtl1: PCI-PM_L1.2+ PCI-PM_L1.1- ASPM_L1.2+ ASPM_L1.1-
> T_CommonMode=0us LTR1.2_Threshold=86016ns
> L1SubCtl2: T_PwrOn=10us
> Kernel driver in use: nvme
>
>
> On Tue, Apr 12, 2022 at 05:50:47PM -0500, Bjorn Helgaas wrote:
> > [+cc Ricky for rtsx_pci ASPM behavior, Rajat, Prasad for L1 SS stuff,
> > Victor for interest in disabling ASPM during save/restore]
> >
> > On Wed, Feb 16, 2022 at 06:41:39PM +0530, Vidya Sagar wrote:
> > > On 2/16/2022 11:30 AM, Kenneth R. Crudup wrote:
> > > > On Wed, 16 Feb 2022, Vidya Sagar wrote:
> > > >
> > > > > I see that the ASPM-L1 state of Realtek NIC which was in
> > > > > disabled state before hibernate got enabled after hibernate.
> > > >
> > > > That's actually my SD-Card reader; there's a good chance the BIOS
> > > > does "something" to it at boot time, as it's possible to boot from
> > > > SD-Card on my laptop.
> > > >
> > > > > This patch doesn't do anything to LnkCtl register which has
> > > > > control for ASPM L1 state.
> > > >
> > > > > Could you please check why ASPM L1 got enabled post hibernation?
> > > >
> > > > I wouldn't know how to do that; if you're still interested in that
> > > > let me know what to do to determine that.
> >
> > > I would like Bjorn to take a call on it.
> > > At this point, there are contradictions in observations.
> >
> > Remind me what contradictions you see? I know Kenny saw NVMe errors
> > on a kernel that included 4257f7e008ea ("PCI/ASPM: Save/restore L1SS
> > Capability for suspend/resume") in December 2020 [1], and that he did
> > *not* see those errors on 4257f7e008ea in February 2022 [2]. Is that
> > what you mean?
> >
> > > Just to summarize,
> > > - The root ports in your laptop don't have support for L1SS
> > > - With the same old code base with which the errors were observed plus my
> > > patch on top of it, I see that ASPM-L1 state getting enabled for one of the
> > > endpoints (Realtek SD-Card reader) after system comes out of hibernation
> > > even though ASPM-L1 was disabled before the system enter into hibernation.
> > > No errors are reported now.
> >
> > I assume you refer to [2], where on 4257f7e008ea ("PCI/ASPM:
> > Save/restore L1SS Capability for suspend/resume"), Kenny saw ASPM L1
> > disabled before hibernate and enabled afterwards:
> >
> > --- pre-hibernate
> > +++ post-hibernate
> > 00:1d.7 PCI bridge [0604]: Intel [8086:34b7]
> > Bus: primary=00, secondary=58, subordinate=58
> > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
> > 58:00.0 RTS525A PCI Express Card Reader [10ec:525a]
> > - LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk-
> > - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > + LnkCtl: ASPM L1 Enabled; RCB 64 bytes, Disabled- CommClk-
> > + ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
> >
> > Per PCIe r6.0, sec 7.5.3.7, "ASPM L1 must be enabled by software in
> > the Upstream component on a Link prior to enabling ASPM L1 in the
> > Downstream component on that Link," so this definitely seems broken,
> > but wouldn't explain the NVMe issue.
> >
> > The PCI core (pcie_config_aspm_link()) always enables L1 in the
> > upstream component before the downstream one, but 58:00.0 uses the
> > rtsx_pci driver, which does a lot of its own ASPM fiddling, so my
> > guess is that it's doing something wrong here.
> >
> > > - With the linux-next top of the tree plus my patch, no change in the ASPM
> > > states and no errors also reported.
> >
> > I don't know which report this refers to.
> >
> > > This points to BIOS being buggy (both old and new with new one being less
> > > problematic)
> >
> > I agree that a BIOS change between [1] and [2] seems plausible, but I
> > don't think we can prove that yet. I'm slightly queasy because while
> > Kenny may have updated his BIOS, most people will not have.
> >
> > I think we should try this patch again with some changes and maybe
> > some debug logging:
> >
> > - I wonder if we should integrate the LTR, L1 SS, and Link Control
> > ASPM restore instead of having them spread around through
> > pci_restore_ltr_state(), pci_restore_aspm_l1ss_state(), and
> > pci_restore_pcie_state(). Maybe a new pci_restore_aspm() that
> > would be called from pci_restore_pcie_state()?
> >
> > - For L1 PM Substates configuration, sec 5.5.4 says that both ports
> > must be configured while ASPM L1 is disabled, but I don't think we
> > currently guarantee this: we restore all the upstream component
> > state first, and we don't know the ASPM state of the downstream
> > one. Maybe we need to:
> >
> > * When restoring upstream component,
> > + disable its ASPM
> >
> > * When restoring downstream component,
> > + disable its ASPM
> > + restore upstream component's LTR, L1SS
> > + restore downstream component's LTR, L1SS
> > + restore upstream component's ASPM
> > + restore downstream component's ASPM
> >
> > This seems pretty messy, but seems like what the spec requires.
> >
> > - Add some pci_dbg() logging of all these save/restore values to
> > help debug any issues.
> >
> > Bjorn
> >
> > [1] https://lore.kernel.org/r/20201228040513.GA611645@bjorn-Precision-5520
> > [2] https://lore.kernel.org/r/3ca14a7-b726-8430-fe61-a3ac183a1088@panix.com
> >
>
>

--
Kenneth R. Crudup / Sr. SW Engineer, Scott County Consulting, Orange County CA

\
 
 \ /
  Last update: 2022-11-23 23:37    [W:0.169 / U:0.208 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site