lkml.org 
[lkml]   [2022]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] drivers: iio: dac: ad5592r: add gpio_chip names
On Thu, 17 Nov 2022 11:01:30 +0200
Antoniu Miclaus <antoniu.miclaus@analog.com> wrote:

> Add array of explicit gpio names for the `gpiochip` structure of
> ad5592r, mainly for debug purposes.
Can you give an example of when this is more useful than the offset?
(which I'm assuming is also available when debugging?)

Jonathan

>
> Since the gpios are configurable via the dts, generic names are
> used.
>
> Signed-off-by: Antoniu Miclaus <antoniu.miclaus@analog.com>
> ---
> drivers/iio/dac/ad5592r-base.c | 5 +++++
> 1 file changed, 5 insertions(+)
>
> diff --git a/drivers/iio/dac/ad5592r-base.c b/drivers/iio/dac/ad5592r-base.c
> index 7a9b5fc1e579..076bc9ecfb49 100644
> --- a/drivers/iio/dac/ad5592r-base.c
> +++ b/drivers/iio/dac/ad5592r-base.c
> @@ -124,6 +124,10 @@ static int ad5592r_gpio_request(struct gpio_chip *chip, unsigned offset)
> return 0;
> }
>
> +static const char * const ad5592r_gpio_names[] = {
> + "GPIO0", "GPIO1", "GPIO2", "GPIO3", "GPIO4", "GPIO5", "GPIO6", "GPIO7",
> +};
> +
> static int ad5592r_gpio_init(struct ad5592r_state *st)
> {
> if (!st->gpio_map)
> @@ -140,6 +144,7 @@ static int ad5592r_gpio_init(struct ad5592r_state *st)
> st->gpiochip.set = ad5592r_gpio_set;
> st->gpiochip.request = ad5592r_gpio_request;
> st->gpiochip.owner = THIS_MODULE;
> + st->gpiochip.names = ad5592r_gpio_names;
>
> mutex_init(&st->gpio_lock);
>

\
 
 \ /
  Last update: 2022-11-23 21:39    [W:2.226 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site