lkml.org 
[lkml]   [2022]   [Nov]   [23]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[patch V3 11/17] Documentation: Replace del_timer/del_timer_sync()
Date
Adjust to the new preferred function names.

Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
---
Documentation/RCU/Design/Requirements/Requirements.rst | 2 +-
Documentation/core-api/local_ops.rst | 2 +-
Documentation/kernel-hacking/locking.rst | 11 +++++------
Documentation/timers/hrtimers.rst | 2 +-
Documentation/translations/it_IT/kernel-hacking/locking.rst | 10 +++++-----
Documentation/translations/zh_CN/core-api/local_ops.rst | 2 +-
6 files changed, 14 insertions(+), 15 deletions(-)

--- a/Documentation/RCU/Design/Requirements/Requirements.rst
+++ b/Documentation/RCU/Design/Requirements/Requirements.rst
@@ -1858,7 +1858,7 @@ unloaded. After a given module has been
one of its functions results in a segmentation fault. The module-unload
functions must therefore cancel any delayed calls to loadable-module
functions, for example, any outstanding mod_timer() must be dealt
-with via del_timer_sync() or similar.
+with via timer_delete_sync() or similar.

Unfortunately, there is no way to cancel an RCU callback; once you
invoke call_rcu(), the callback function is eventually going to be
--- a/Documentation/core-api/local_ops.rst
+++ b/Documentation/core-api/local_ops.rst
@@ -191,7 +191,7 @@ Here is a sample module which implements

static void __exit test_exit(void)
{
- del_timer_sync(&test_timer);
+ timer_delete_sync(&test_timer);
}

module_init(test_init);
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -967,7 +967,7 @@ If you want to destroy the entire collec

while (list) {
struct foo *next = list->next;
- del_timer(&list->timer);
+ timer_delete(&list->timer);
kfree(list);
list = next;
}
@@ -981,7 +981,7 @@ the lock after we spin_unlock_bh(), and
the element (which has already been freed!).

This can be avoided by checking the result of
-del_timer(): if it returns 1, the timer has been deleted.
+timer_delete(): if it returns 1, the timer has been deleted.
If 0, it means (in this case) that it is currently running, so we can
do::

@@ -990,7 +990,7 @@ If 0, it means (in this case) that it is

while (list) {
struct foo *next = list->next;
- if (!del_timer(&list->timer)) {
+ if (!timer_delete(&list->timer)) {
/* Give timer a chance to delete this */
spin_unlock_bh(&list_lock);
goto retry;
@@ -1005,8 +1005,7 @@ If 0, it means (in this case) that it is
Another common problem is deleting timers which restart themselves (by
calling add_timer() at the end of their timer function).
Because this is a fairly common case which is prone to races, you should
-use del_timer_sync() (``include/linux/timer.h``) to
-handle this case.
+use timer_delete_sync() (``include/linux/timer.h``) to handle this case.

Locking Speed
=============
@@ -1334,7 +1333,7 @@ lock.

- kfree()

-- add_timer() and del_timer()
+- add_timer() and timer_delete()

Mutex API reference
===================
--- a/Documentation/timers/hrtimers.rst
+++ b/Documentation/timers/hrtimers.rst
@@ -118,7 +118,7 @@ existing timer wheel code, as it is matu
was not really a win, due to the different data structures. Also, the
hrtimer functions now have clearer behavior and clearer names - such as
hrtimer_try_to_cancel() and hrtimer_cancel() [which are roughly
-equivalent to del_timer() and del_timer_sync()] - so there's no direct
+equivalent to timer_delete() and timer_delete_sync()] - so there's no direct
1:1 mapping between them on the algorithmic level, and thus no real
potential for code sharing either.

--- a/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -990,7 +990,7 @@ Se volete eliminare l'intera collezione

while (list) {
struct foo *next = list->next;
- del_timer(&list->timer);
+ timer_delete(&list->timer);
kfree(list);
list = next;
}
@@ -1003,7 +1003,7 @@ e prenderà il *lock* solo dopo spin_unl
di eliminare il suo oggetto (che però è già stato eliminato).

Questo può essere evitato controllando il valore di ritorno di
-del_timer(): se ritorna 1, il temporizzatore è stato già
+timer_delete(): se ritorna 1, il temporizzatore è stato già
rimosso. Se 0, significa (in questo caso) che il temporizzatore è in
esecuzione, quindi possiamo fare come segue::

@@ -1012,7 +1012,7 @@ rimosso. Se 0, significa (in questo caso

while (list) {
struct foo *next = list->next;
- if (!del_timer(&list->timer)) {
+ if (!timer_delete(&list->timer)) {
/* Give timer a chance to delete this */
spin_unlock_bh(&list_lock);
goto retry;
@@ -1026,7 +1026,7 @@ rimosso. Se 0, significa (in questo caso
Un altro problema è l'eliminazione dei temporizzatori che si riavviano
da soli (chiamando add_timer() alla fine della loro esecuzione).
Dato che questo è un problema abbastanza comune con una propensione
-alle corse critiche, dovreste usare del_timer_sync()
+alle corse critiche, dovreste usare timer_delete_sync()
(``include/linux/timer.h``) per gestire questo caso.

Velocità della sincronizzazione
@@ -1372,7 +1372,7 @@ contesto, o trattenendo un qualsiasi *lo

- kfree()

-- add_timer() e del_timer()
+- add_timer() e timer_delete()

Riferimento per l'API dei Mutex
===============================
--- a/Documentation/translations/zh_CN/core-api/local_ops.rst
+++ b/Documentation/translations/zh_CN/core-api/local_ops.rst
@@ -185,7 +185,7 @@ UP之间没有不同的行为,在你�

static void __exit test_exit(void)
{
- del_timer_sync(&test_timer);
+ timer_delete_sync(&test_timer);
}

module_init(test_init);
\
 
 \ /
  Last update: 2022-11-23 21:22    [W:0.187 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site