lkml.org 
[lkml]   [2022]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] kbuild: fix "cat: .version: No such file or directory"
Date
Since commit 2df8220cc511 ("kbuild: build init/built-in.a just once"),
the .version file is not touched at all when KBUILD_BUILD_VERSION is
given.

If KBUILD_BUILD_VERSION is specified and the .version file is missing
(for example right after 'make mrproper'), "No such file or director"
is shown. Even if the .version exists, it is irrelevant to the version
of the current build.

$ make -j$(nproc) KBUILD_BUILD_VERSION=100 mrproper defconfig all
[ snip ]
BUILD arch/x86/boot/bzImage
cat: .version: No such file or directory
Kernel: arch/x86/boot/bzImage is ready (#)

Show KBUILD_BUILD_VERSION if it is given.

Fixes: 2df8220cc511 ("kbuild: build init/built-in.a just once")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
---

arch/microblaze/Makefile | 4 ++--
arch/x86/boot/Makefile | 2 +-
2 files changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 3f8a86c4336a..02e6be9c5b0d 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -67,12 +67,12 @@ linux.bin.ub linux.bin.gz: linux.bin
linux.bin: vmlinux
linux.bin linux.bin.gz linux.bin.ub:
$(Q)$(MAKE) $(build)=$(boot) $(boot)/$@
- @echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
+ @echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

PHONY += simpleImage.$(DTB)
simpleImage.$(DTB): vmlinux
$(Q)$(MAKE) $(build)=$(boot) $(addprefix $(boot)/$@., ub unstrip strip)
- @echo 'Kernel: $(boot)/$@ is ready' ' (#'`cat .version`')'
+ @echo 'Kernel: $(boot)/$@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

define archhelp
echo '* linux.bin - Create raw binary'
diff --git a/arch/x86/boot/Makefile b/arch/x86/boot/Makefile
index 9860ca5979f8..9e38ffaadb5d 100644
--- a/arch/x86/boot/Makefile
+++ b/arch/x86/boot/Makefile
@@ -83,7 +83,7 @@ cmd_image = $(obj)/tools/build $(obj)/setup.bin $(obj)/vmlinux.bin \

$(obj)/bzImage: $(obj)/setup.bin $(obj)/vmlinux.bin $(obj)/tools/build FORCE
$(call if_changed,image)
- @$(kecho) 'Kernel: $@ is ready' ' (#'`cat .version`')'
+ @$(kecho) 'Kernel: $@ is ready' ' (#'$(or $(KBUILD_BUILD_VERSION),`cat .version`)')'

OBJCOPYFLAGS_vmlinux.bin := -O binary -R .note -R .comment -S
$(obj)/vmlinux.bin: $(obj)/compressed/vmlinux FORCE
--
2.34.1
\
 
 \ /
  Last update: 2022-11-22 15:40    [W:0.048 / U:0.768 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site