lkml.org 
[lkml]   [2022]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH] cpuidle: riscv-sbi: Stop using non-retentive suspend
On Tue, Nov 22, 2022 at 11:06:15AM +0530, Anup Patel wrote:
> On Tue, Nov 22, 2022 at 10:46 AM Palmer Dabbelt <palmer@rivosinc.com> wrote:
> >
> > On Mon, 21 Nov 2022 19:45:07 PST (-0800), anup@brainfault.org wrote:
> > > On Tue, Nov 22, 2022 at 2:27 AM Palmer Dabbelt <palmer@rivosinc.com> wrote:
> > >>
> > >> From: Palmer Dabbelt <palmer@rivosinc.com>
> > >>
> > >> As per [1], whether or not the core can wake up from non-retentive
> > >> suspend is a platform-specific detail. We don't have any way to encode
> > >> that, so just stop using them until we've sorted that out.
> > >>
> > >> Link: https://github.com/riscv-non-isa/riscv-sbi-doc/issues/98#issuecomment-1288564687
> > >> Fixes: 6abf32f1d9c5 ("cpuidle: Add RISC-V SBI CPU idle driver")
> > >> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
> > >
> > > This is just unnecessary maintenance churn and it's not the
> > > right way to go. Better to fix this the right way instead of having
> > > a temporary fix.
> > >
> > > I had already sent-out a patch series 5 months back to describe
> > > this in DT:
> > > https://lore.kernel.org/lkml/20220727114302.302201-1-apatel@ventanamicro.com/
> > >
> > > No one has commented/suggested anything (except Samuel
> > > Holland and Sudeep Holla).
> >
> > I see some comments from Krzysztof here
> > <https://lore.kernel.org/lkml/7a0477a0-9f0f-87d6-4070-30321745f4cc@linaro.org/>
> > as well. Looks like everyone is pointing out that having our CPU nodes
> > encode timers is a bad idea, my guess is that they're probably right.
>
> Adding a separate timer DT node, creates a new set of compatibility
> issues for existing platforms. I am fine updating my series to have
> separate timer DT node but do we want to go in this direction ?

I don't really follow. How is there a compatibility issue created by
adding a new node that is not added for a new property? Both will
require changes to the device tree. (You need not reply here, I am going
to review the other thread, it's been on my todo list for too long. Been
caught up with non-coherent stuff & our sw release cycle..)

> Even if ARM has a separate timer DT node, the timers are still part
> of the CPU. It depends on how we see the DT bindings aligning with
> actual HW.
>
> >
> > > Please review this series. I can quickly address comments to
> > > make this available for Linux-6.2. Until this series is merged,
> > > the affected platforms can simply remove non-retentive suspend
> > > states from their DT.
> >
> > That leaves us with a dependency between kernel versions and DT
> > bindings: kernels with the current driver will result in broken systems
> > with the non-retentive suspend states in the DT they boot with when
> > those states can't wake up the CPU.

Can someone point me at a (non D1 or virt) system that has suspend
states in the DT that would need fixing?

> This is not a new problem we are facing. Even in the ARM world,
> the DT bindings grew organically over time based on newer platform
> requirements.
>
> Now that we have a platform which does not want the time
> C3STOP feature, we need to first come-up with DT bindings
> to support this platform instead of temporarily disabling
> features which don't work on this platform.

It's the opposite surely? It should be "now that we have a platform that
*does want* the C3STOP feature", right?

> > > With all due respect, NACK to this patch from my side.

As Samuel pointed out that the D1 doesn't actually use the timer in
question, I think we are okay here?

> > >>
> > >> ---
> > >>
> > >> This should allow us to revert 232ccac1bd9b ("clocksource/drivers/riscv:
> > >> Events are stopped during CPU suspend"), which fixes suspend on the D1
> > >> but breaks timers everywhere.
> > >> ---
> > >> drivers/cpuidle/cpuidle-riscv-sbi.c | 11 +++++++++++
> > >> 1 file changed, 11 insertions(+)
> > >>
> > >> diff --git a/drivers/cpuidle/cpuidle-riscv-sbi.c b/drivers/cpuidle/cpuidle-riscv-sbi.c
> > >> index 05fe2902df9a..9d1063a54495 100644
> > >> --- a/drivers/cpuidle/cpuidle-riscv-sbi.c
> > >> +++ b/drivers/cpuidle/cpuidle-riscv-sbi.c
> > >> @@ -214,6 +214,17 @@ static bool sbi_suspend_state_is_valid(u32 state)
> > >> if (state > SBI_HSM_SUSPEND_NON_RET_DEFAULT &&
> > >> state < SBI_HSM_SUSPEND_NON_RET_PLATFORM)
> > >> return false;
> > >> +
> > >> + /*
> > >> + * Whether or not RISC-V systems deliver interrupts to harts in a
> > >> + * non-retentive suspend state is a platform-specific detail. This can
> > >> + * leave the hart unable to wake up, so just mark these states as
> > >> + * unsupported until we have a mechanism to expose these
> > >> + * platform-specific details to Linux.
> > >> + */
> > >> + if (state & SBI_HSM_SUSP_NON_RET_BIT)
> > >> + return false;
> > >> +
> > >> return true;
> > >> }
> > >>
> > >> --
> > >> 2.38.1
> > >>

\
 
 \ /
  Last update: 2022-11-22 12:28    [W:0.807 / U:0.032 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site