Messages in this thread | | | Date | Tue, 22 Nov 2022 09:09:55 +0100 | Subject | Re: [PATCH v5 0/6] Nuvoton WPCM450 clock and reset driver | From | Daniel Lezcano <> |
| |
On 22/11/2022 02:40, Joel Stanley wrote: > On Fri, 4 Nov 2022 at 16:21, Jonathan Neuschäfer <j.neuschaefer@gmx.net> wrote: >> >> This series adds support for the clock and reset controller in the Nuvoton >> WPCM450 SoC. This means that the clock rates for peripherals will be calculated >> automatically based on the clock tree as it was preconfigured by the bootloader. >> The 24 MHz dummy clock, that is currently in the devicetree, is no longer needed. >> Somewhat unfortunately, this also means that there is a breaking change once >> the devicetree starts relying on the clock driver, but I find it acceptable in >> this case, because WPCM450 is still at a somewhat early stage. > > Reviewed-by: Joel Stanley <joel@jms.id.au> > >> >> >> Upstreaming plan (although other suggestions are welcome): >> >> Once reviewed, >> >> - The ARM/dts changes should go through Joel Stanley's bmc tree > > I've picked up the standalone patch ("Add clock controller node"). > >> - The clocksource/timer changes should probably go via Daniel Lezcano and TIP
I picked the timer change along with the binding
| |