lkml.org 
[lkml]   [2022]   [Nov]   [22]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH v4] hwmon: (pmbus/core): Implement regulator get_status
On Tue, Nov 22, 2022 at 10:03:02AM +0100, Naresh Solanki wrote:
> From: Patrick Rudolph <patrick.rudolph@9elements.com>
>
> Add get_status for pmbus_regulator_ops.
> ---
> Changes:
> - use lock throughout the function
> - Avoid line continuation upto 100 column
> - Optimize use of & and | operator
> - Check for VOUT, IOUT, TEMPERATURE bit in status word before checking
> respective status register for fault.
> - Report regulator current status.
> - Utilize get_error_flag to check for regulator errors.
>
> Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
> Signed-off-by: Naresh Solanki <Naresh.Solanki@9elements.com>
> ---
> drivers/hwmon/pmbus/pmbus_core.c | 41 ++++++++++++++++++++++++++++++++
> 1 file changed, 41 insertions(+)
>
>
> base-commit: 27fea302952d8c90cafbdbee96bafeca03544401
>
> diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c
> index 7ec04934747e..5df2aee549e6 100644
> --- a/drivers/hwmon/pmbus/pmbus_core.c
> +++ b/drivers/hwmon/pmbus/pmbus_core.c
> @@ -2851,6 +2851,46 @@ static int pmbus_regulator_get_error_flags(struct regulator_dev *rdev, unsigned
> return 0;
> }
>
> +static int pmbus_regulator_get_status(struct regulator_dev *rdev)
> +{
> + struct device *dev = rdev_get_dev(rdev);
> + struct i2c_client *client = to_i2c_client(dev->parent);
> + struct pmbus_data *data = i2c_get_clientdata(client);
> + u8 page = rdev_get_id(rdev);
> + int status, ret;
> +
> + mutex_lock(&data->update_lock);
> + status = pmbus_get_status(client, page, PMBUS_STATUS_WORD);
> + if (status < 0) {
> + ret = status;
> + goto unlock;
> + }
> +
> + if (status & PB_STATUS_OFF) {
> + ret = REGULATOR_STATUS_OFF;
> + goto unlock;
> + }
> +
> + /* If regulator is ON & reports power good then return ON */
> + if (!(status & PB_STATUS_POWER_GOOD_N)) {
> + ret = REGULATOR_STATUS_ON;
> + goto unlock;
> + }
> +
> + if (rdev->desc->ops->get_error_flags)
> + ret = rdev->desc->ops->get_error_flags(rdev, &status);
> +

What about checking ret ?

> + if (status & (REGULATOR_ERROR_UNDER_VOLTAGE | REGULATOR_ERROR_OVER_CURRENT |
> + REGULATOR_ERROR_REGULATION_OUT | REGULATOR_ERROR_FAIL | REGULATOR_ERROR_OVER_TEMP))
> + ret = REGULATOR_STATUS_ERROR;
> + else
> + ret = REGULATOR_STATUS_UNDEFINED;

This part has to be inside "if (rdev->desc->ops->get_error_flags)"
or status will still contain the status word.

Guenter

> +
> +unlock:
> + mutex_unlock(&data->update_lock);
> + return ret;
> +}
> +
> static int pmbus_regulator_get_low_margin(struct i2c_client *client, int page)
> {
> struct pmbus_data *data = i2c_get_clientdata(client);
> @@ -2991,6 +3031,7 @@ const struct regulator_ops pmbus_regulator_ops = {
> .disable = pmbus_regulator_disable,
> .is_enabled = pmbus_regulator_is_enabled,
> .get_error_flags = pmbus_regulator_get_error_flags,
> + .get_status = pmbus_regulator_get_status,
> .get_voltage = pmbus_regulator_get_voltage,
> .set_voltage = pmbus_regulator_set_voltage,
> .list_voltage = pmbus_regulator_list_voltage,

\
 
 \ /
  Last update: 2022-11-22 19:49    [W:0.063 / U:0.064 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site