lkml.org 
[lkml]   [2022]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    From
    Subject[PATCH v7 00/20] Drivers for gunyah hypervisor
    Date
    Gunyah is a Type-1 hypervisor independent of any
    high-level OS kernel, and runs in a higher CPU privilege level. It does
    not depend on any lower-privileged OS kernel/code for its core
    functionality. This increases its security and can support a much smaller
    trusted computing base than a Type-2 hypervisor.

    Gunyah is an open source hypervisor. The source repo is available at
    https://github.com/quic/gunyah-hypervisor.

    The diagram below shows the architecture.

    ::

    VM A VM B
    +-----+ +-----+ | +-----+ +-----+ +-----+
    | | | | | | | | | | |
    EL0 | APP | | APP | | | APP | | APP | | APP |
    | | | | | | | | | | |
    +-----+ +-----+ | +-----+ +-----+ +-----+
    ---------------------|-------------------------
    +--------------+ | +----------------------+
    | | | | |
    EL1 | Linux Kernel | | |Linux kernel/Other OS | ...
    | | | | |
    +--------------+ | +----------------------+
    --------hvc/smc------|------hvc/smc------------
    +----------------------------------------+
    | |
    EL2 | Gunyah Hypervisor |
    | |
    +----------------------------------------+

    Gunyah provides these following features.

    - Threads and Scheduling: The scheduler schedules virtual CPUs (VCPUs) on
    physical CPUs and enables time-sharing of the CPUs.
    - Memory Management: Gunyah tracks memory ownership and use of all memory
    under its control. Memory partitioning between VMs is a fundamental
    security feature.
    - Interrupt Virtualization: All interrupts are handled in the hypervisor
    and routed to the assigned VM.
    - Inter-VM Communication: There are several different mechanisms provided
    for communicating between VMs.
    - Device Virtualization: Para-virtualization of devices is supported using
    inter-VM communication. Low level system features and devices such as
    interrupt controllers are supported with emulation where required.

    This series adds the basic framework for detecting that Linux is running
    under Gunyah as a virtual machine, communication with the Gunyah Resource
    Manager, and a basic virtual machine manager capable of launching virtual
    machines. In a future series, I'll add more functionality to the VM Manager,
    but functionality is kept limited here to reduce the number of patches to
    review.

    Changes in v7:
    - Refactor to remove gunyah RM bus
    - Refactor allow multiple RM device instances
    - Bump UAPI to start at 0x0
    - Refactor QCOM SCM's platform hooks to allow CONFIG_QCOM_SCM=Y/CONFIG_GUNYAH=M combinations

    Changes in v6: https://lore.kernel.org/all/20221026185846.3983888-1-quic_eberman@quicinc.com/
    - *Replace gunyah-console with gunyah VM Manager*
    - Move include/asm-generic/gunyah.h into include/linux/gunyah.h
    - s/gunyah_msgq/gh_msgq/
    - Minor tweaks and documentation tidying based on comments from Jiri, Greg, Arnd, Dmitry, and Bagas.

    Changes in v5: https://lore.kernel.org/all/20221011000840.289033-1-quic_eberman@quicinc.com/
    - Dropped sysfs nodes
    - Switch from aux bus to Gunyah RM bus for the subdevices
    - Cleaning up RM console

    Changes in v4: https://lore.kernel.org/all/20220928195633.2348848-1-quic_eberman@quicinc.com/
    - Tidied up documentation throughout based on questions/feedback received
    - Switched message queue implementation to use mailboxes
    - Renamed "gunyah_device" as "gunyah_resource"

    Changes in v3: https://lore.kernel.org/all/20220811214107.1074343-1-quic_eberman@quicinc.com/
    - /Maintained/Supported/ in MAINTAINERS
    - Tidied up documentation throughout based on questions/feedback received
    - Moved hypercalls into arch/arm64/gunyah/; following hyper-v's implementation
    - Drop opaque typedefs
    - Move sysfs nodes under /sys/hypervisor/gunyah/
    - Moved Gunyah console driver to drivers/tty/
    - Reworked gunyah_device design to drop the Gunyah bus.

    Changes in v2: https://lore.kernel.org/all/20220801211240.597859-1-quic_eberman@quicinc.com/
    - DT bindings clean up
    - Switch hypercalls to follow SMCCC

    v1: https://lore.kernel.org/all/20220223233729.1571114-1-quic_eberman@quicinc.com/

    Elliot Berman (20):
    docs: gunyah: Introduce Gunyah Hypervisor
    dt-bindings: Add binding for gunyah hypervisor
    gunyah: Common types and error codes for Gunyah hypercalls
    arm64: smccc: Include alternative-macros.h
    virt: gunyah: Add hypercalls to identify Gunyah
    virt: gunyah: Identify hypervisor version
    mailbox: Allow direct registration to a channel
    virt: gunyah: msgq: Add hypercalls to send and receive messages
    mailbox: Add Gunyah message queue mailbox
    gunyah: rsc_mgr: Add resource manager RPC core
    gunyah: rsc_mgr: Add VM lifecycle RPC
    gunyah: vm_mgr: Introduce basic VM Manager
    gunyah: rsc_mgr: Add RPC for sharing memory
    gunyah: vm_mgr: Add/remove user memory regions
    gunyah: vm_mgr: Add ioctls to support basic non-proxy VM boot
    samples: Add sample userspace Gunyah VM Manager
    gunyah: rsc_mgr: Add platform ops on mem_lend/mem_reclaim
    firmware: qcom_scm: Use fixed width src vm bitmap
    firmware: qcom_scm: Register Gunyah platform ops
    docs: gunyah: Document Gunyah VM Manager

    .../bindings/firmware/gunyah-hypervisor.yaml | 82 ++
    .../userspace-api/ioctl/ioctl-number.rst | 1 +
    Documentation/virt/gunyah/index.rst | 115 ++
    Documentation/virt/gunyah/message-queue.rst | 64 ++
    Documentation/virt/gunyah/vm-manager.rst | 91 ++
    Documentation/virt/index.rst | 1 +
    MAINTAINERS | 13 +
    arch/arm64/Kbuild | 1 +
    arch/arm64/gunyah/Makefile | 1 +
    arch/arm64/gunyah/gunyah_hypercall.c | 102 ++
    drivers/firmware/Kconfig | 2 +
    drivers/firmware/qcom_scm.c | 107 +-
    drivers/mailbox/Kconfig | 10 +
    drivers/mailbox/Makefile | 2 +
    drivers/mailbox/gunyah-msgq.c | 229 ++++
    drivers/mailbox/mailbox.c | 96 +-
    drivers/mailbox/omap-mailbox.c | 18 +-
    drivers/mailbox/pcc.c | 17 +-
    drivers/misc/fastrpc.c | 6 +-
    drivers/net/wireless/ath/ath10k/qmi.c | 4 +-
    drivers/remoteproc/qcom_q6v5_mss.c | 8 +-
    drivers/soc/qcom/rmtfs_mem.c | 2 +-
    drivers/virt/Kconfig | 1 +
    drivers/virt/Makefile | 1 +
    drivers/virt/gunyah/Kconfig | 33 +
    drivers/virt/gunyah/Makefile | 7 +
    drivers/virt/gunyah/gunyah.c | 46 +
    drivers/virt/gunyah/gunyah_platform_hooks.c | 63 ++
    drivers/virt/gunyah/gunyah_rm_rpc.c | 987 ++++++++++++++++++
    drivers/virt/gunyah/gunyah_rsc_mgr.c | 70 ++
    drivers/virt/gunyah/rsc_mgr.h | 130 +++
    drivers/virt/gunyah/vm_mgr.c | 291 ++++++
    drivers/virt/gunyah/vm_mgr.h | 68 ++
    drivers/virt/gunyah/vm_mgr_mm.c | 246 +++++
    include/linux/arm-smccc.h | 1 +
    include/linux/gunyah.h | 167 +++
    include/linux/gunyah_rsc_mgr.h | 137 +++
    include/linux/mailbox_client.h | 1 +
    include/linux/qcom_scm.h | 2 +-
    include/uapi/linux/gunyah.h | 53 +
    samples/Kconfig | 10 +
    samples/Makefile | 1 +
    samples/gunyah/.gitignore | 2 +
    samples/gunyah/Makefile | 6 +
    samples/gunyah/gunyah_vmm.c | 270 +++++
    samples/gunyah/sample_vm.dts | 69 ++
    46 files changed, 3563 insertions(+), 71 deletions(-)
    create mode 100644 Documentation/devicetree/bindings/firmware/gunyah-hypervisor.yaml
    create mode 100644 Documentation/virt/gunyah/index.rst
    create mode 100644 Documentation/virt/gunyah/message-queue.rst
    create mode 100644 Documentation/virt/gunyah/vm-manager.rst
    create mode 100644 arch/arm64/gunyah/Makefile
    create mode 100644 arch/arm64/gunyah/gunyah_hypercall.c
    create mode 100644 drivers/mailbox/gunyah-msgq.c
    create mode 100644 drivers/virt/gunyah/Kconfig
    create mode 100644 drivers/virt/gunyah/Makefile
    create mode 100644 drivers/virt/gunyah/gunyah.c
    create mode 100644 drivers/virt/gunyah/gunyah_platform_hooks.c
    create mode 100644 drivers/virt/gunyah/gunyah_rm_rpc.c
    create mode 100644 drivers/virt/gunyah/gunyah_rsc_mgr.c
    create mode 100644 drivers/virt/gunyah/rsc_mgr.h
    create mode 100644 drivers/virt/gunyah/vm_mgr.c
    create mode 100644 drivers/virt/gunyah/vm_mgr.h
    create mode 100644 drivers/virt/gunyah/vm_mgr_mm.c
    create mode 100644 include/linux/gunyah.h
    create mode 100644 include/linux/gunyah_rsc_mgr.h
    create mode 100644 include/uapi/linux/gunyah.h
    create mode 100644 samples/gunyah/.gitignore
    create mode 100644 samples/gunyah/Makefile
    create mode 100644 samples/gunyah/gunyah_vmm.c
    create mode 100644 samples/gunyah/sample_vm.dts


    base-commit: 094226ad94f471a9f19e8f8e7140a09c2625abaa
    --
    2.25.1

    \
     
     \ /
      Last update: 2022-11-21 15:02    [W:4.163 / U:0.052 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site