lkml.org 
[lkml]   [2022]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 5/5] arm64: dts: qcom: msm8916-gplus-fl8005a: Add flash LED
From


On 19.11.2022 21:28, Lin, Meng-Bo wrote:
> FL8005A uses SGM3140 Flash LED driver. Add it to the device tree.
>
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@protonmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> .../boot/dts/qcom/msm8916-gplus-fl8005a.dts | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
> index cc81880f7c42..131e12ae510e 100644
> --- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
> @@ -21,6 +21,21 @@ chosen {
> stdout-path = "serial0";
> };
>
> + flash-led-controller {
> + compatible = "sgmicro,sgm3140";
> + enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
> + flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&camera_flash_default>;
> +
> + flash_led: led {
> + function = LED_FUNCTION_FLASH;
> + color = <LED_COLOR_ID_WHITE>;
> + flash-max-timeout-us = <250000>;
> + };
> + };
> +
> gpio-keys {
> compatible = "gpio-keys";
>
> @@ -239,6 +254,14 @@ l18 {
> };
>
> &msmgpio {
> + camera_flash_default: camera-flash-default-state {
> + pins = "gpio31", "gpio32";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-disable;
> + };
> +
> gpio_keys_default: gpio-keys-default-state {
> pins = "gpio107";
> function = "gpio";

\
 
 \ /
  Last update: 2022-11-21 12:30    [W:0.414 / U:0.384 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site