lkml.org 
[lkml]   [2022]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH] can: sja1000: plx_pci: fix error handling path in plx_pci_add_card()
Date
If pci_iomap() or register_sja1000dev() fails, netdev will not be
registered, but plx_pci_del_card() still deregisters the netdev.

To avoid this, let's free the netdev and clear card->net_dev[i] before
calling plx_pci_del_card(). In addition, add the missing pci_iounmap()
when the channel does not exist.

Compile tested only.

Fixes: 951f2f960e5b ("drivers/net/can/sja1000/plx_pci.c: eliminate double free")
Fixes: 24c4a3b29255 ("can: add support for CAN interface cards based on the PLX90xx PCI bridge")
Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com>
---
drivers/net/can/sja1000/plx_pci.c | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/drivers/net/can/sja1000/plx_pci.c b/drivers/net/can/sja1000/plx_pci.c
index 5de1ebb..1158f5a 100644
--- a/drivers/net/can/sja1000/plx_pci.c
+++ b/drivers/net/can/sja1000/plx_pci.c
@@ -678,6 +678,8 @@ static int plx_pci_add_card(struct pci_dev *pdev,
if (!addr) {
err = -ENOMEM;
dev_err(&pdev->dev, "Failed to remap BAR%d\n", cm->bar);
+ free_sja1000dev(dev);
+ card->net_dev[i] = NULL;
goto failure_cleanup;
}

@@ -699,6 +701,9 @@ static int plx_pci_add_card(struct pci_dev *pdev,
if (err) {
dev_err(&pdev->dev, "Registering device failed "
"(err=%d)\n", err);
+ pci_iounmap(pdev, priv->reg_base);
+ free_sja1000dev(dev);
+ card->net_dev[i] = NULL;
goto failure_cleanup;
}

@@ -710,6 +715,7 @@ static int plx_pci_add_card(struct pci_dev *pdev,
} else {
dev_err(&pdev->dev, "Channel #%d not detected\n",
i + 1);
+ pci_iounmap(pdev, priv->reg_base);
free_sja1000dev(dev);
card->net_dev[i] = NULL;
}
--
2.9.5
\
 
 \ /
  Last update: 2022-11-21 11:51    [W:0.045 / U:0.476 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site