lkml.org 
[lkml]   [2022]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH net-next v3 2/7] net: lan966x: Introduce helper functions
Date
Introduce lan966x_fdma_tx_setup_dcb and lan966x_fdma_tx_start functions
and use of them inside lan966x_fdma_xmit. There is no functional change
in here.
They are introduced to be used when XDP_TX/REDIRECT actions are
introduced.

Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
---
.../ethernet/microchip/lan966x/lan966x_fdma.c | 71 ++++++++++++-------
1 file changed, 44 insertions(+), 27 deletions(-)

diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c b/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
index 3055124b4dd79..94c720e59caee 100644
--- a/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
+++ b/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
@@ -612,14 +612,53 @@ static int lan966x_fdma_get_next_dcb(struct lan966x_tx *tx)
return -1;
}

+static void lan966x_fdma_tx_setup_dcb(struct lan966x_tx *tx,
+ int next_to_use, int len,
+ dma_addr_t dma_addr)
+{
+ struct lan966x_tx_dcb *next_dcb;
+ struct lan966x_db *next_db;
+
+ next_dcb = &tx->dcbs[next_to_use];
+ next_dcb->nextptr = FDMA_DCB_INVALID_DATA;
+
+ next_db = &next_dcb->db[0];
+ next_db->dataptr = dma_addr;
+ next_db->status = FDMA_DCB_STATUS_SOF |
+ FDMA_DCB_STATUS_EOF |
+ FDMA_DCB_STATUS_INTR |
+ FDMA_DCB_STATUS_BLOCKO(0) |
+ FDMA_DCB_STATUS_BLOCKL(len);
+}
+
+static void lan966x_fdma_tx_start(struct lan966x_tx *tx, int next_to_use)
+{
+ struct lan966x *lan966x = tx->lan966x;
+ struct lan966x_tx_dcb *dcb;
+
+ if (likely(lan966x->tx.activated)) {
+ /* Connect current dcb to the next db */
+ dcb = &tx->dcbs[tx->last_in_use];
+ dcb->nextptr = tx->dma + (next_to_use *
+ sizeof(struct lan966x_tx_dcb));
+
+ lan966x_fdma_tx_reload(tx);
+ } else {
+ /* Because it is first time, then just activate */
+ lan966x->tx.activated = true;
+ lan966x_fdma_tx_activate(tx);
+ }
+
+ /* Move to next dcb because this last in use */
+ tx->last_in_use = next_to_use;
+}
+
int lan966x_fdma_xmit(struct sk_buff *skb, __be32 *ifh, struct net_device *dev)
{
struct lan966x_port *port = netdev_priv(dev);
struct lan966x *lan966x = port->lan966x;
struct lan966x_tx_dcb_buf *next_dcb_buf;
- struct lan966x_tx_dcb *next_dcb, *dcb;
struct lan966x_tx *tx = &lan966x->tx;
- struct lan966x_db *next_db;
int needed_headroom;
int needed_tailroom;
dma_addr_t dma_addr;
@@ -665,16 +704,7 @@ int lan966x_fdma_xmit(struct sk_buff *skb, __be32 *ifh, struct net_device *dev)
}

/* Setup next dcb */
- next_dcb = &tx->dcbs[next_to_use];
- next_dcb->nextptr = FDMA_DCB_INVALID_DATA;
-
- next_db = &next_dcb->db[0];
- next_db->dataptr = dma_addr;
- next_db->status = FDMA_DCB_STATUS_SOF |
- FDMA_DCB_STATUS_EOF |
- FDMA_DCB_STATUS_INTR |
- FDMA_DCB_STATUS_BLOCKO(0) |
- FDMA_DCB_STATUS_BLOCKL(skb->len);
+ lan966x_fdma_tx_setup_dcb(tx, next_to_use, skb->len, dma_addr);

/* Fill up the buffer */
next_dcb_buf = &tx->dcbs_buf[next_to_use];
@@ -688,21 +718,8 @@ int lan966x_fdma_xmit(struct sk_buff *skb, __be32 *ifh, struct net_device *dev)
LAN966X_SKB_CB(skb)->rew_op == IFH_REW_OP_TWO_STEP_PTP)
next_dcb_buf->ptp = true;

- if (likely(lan966x->tx.activated)) {
- /* Connect current dcb to the next db */
- dcb = &tx->dcbs[tx->last_in_use];
- dcb->nextptr = tx->dma + (next_to_use *
- sizeof(struct lan966x_tx_dcb));
-
- lan966x_fdma_tx_reload(tx);
- } else {
- /* Because it is first time, then just activate */
- lan966x->tx.activated = true;
- lan966x_fdma_tx_activate(tx);
- }
-
- /* Move to next dcb because this last in use */
- tx->last_in_use = next_to_use;
+ /* Start the transmission */
+ lan966x_fdma_tx_start(tx, next_to_use);

return NETDEV_TX_OK;

--
2.38.0
\
 
 \ /
  Last update: 2022-11-21 22:25    [W:0.156 / U:0.472 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site