lkml.org 
[lkml]   [2022]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v4 3/3] interconnect: qcom: Add QDU1000/QRU1000 interconnect driver
From


On 11/20/2022 6:19 AM, Christophe JAILLET wrote:
> Le 18/11/2022 à 19:22, Melody Olvera a écrit :
>> Add interconnect provider driver for Qualcomm QDU1000 and QRU1000
>> platforms.
>>
>> Signed-off-by: Melody Olvera <quic_molvera@quicinc.com>
>> ---
>>   drivers/interconnect/qcom/Kconfig   |    9 +
>>   drivers/interconnect/qcom/Makefile  |    2 +
>>   drivers/interconnect/qcom/qdu1000.c | 1079 +++++++++++++++++++++++++++
>>   drivers/interconnect/qcom/qdu1000.h |   95 +++
>>   4 files changed, 1185 insertions(+)
>>   create mode 100644 drivers/interconnect/qcom/qdu1000.c
>>   create mode 100644 drivers/interconnect/qcom/qdu1000.h
>>
>
> [...]
>
>> +static int qnoc_probe(struct platform_device *pdev)
>> +{
>> +    int ret;
>> +
>> +    ret = qcom_icc_rpmh_probe(pdev);
>> +    if (ret)
>> +        dev_err(&pdev->dev, "failed to register ICC provider\n");
>> +
>> +    return ret;
>> +}
>> +
>> +static int qnoc_remove(struct platform_device *pdev)
>> +{
>> +    struct qcom_icc_provider *qp = platform_get_drvdata(pdev);
>> +
>> +    icc_nodes_remove(&qp->provider);
>> +    icc_provider_del(&qp->provider);
>
> qcom_icc_rpmh_remove()?
>
> (more future proof, less verbose and more consistent with qcom_icc_rpmh_probe() in the probe)
>
> CJ

Good call. Does it make sense to just set the .probe and .remove functions as
qcom_icc_rpmh_probe() and qcom_icc_rpmh_remove(), respectively? Probe function
is just reporting if qcom_icc_rpmh_probe fails.

Thanks,
Melody
>
>> +
>> +    return 0;
>> +}
>> +
>> +static const struct of_device_id qnoc_of_match[] = {
>> +    { .compatible = "qcom,qdu1000-clk-virt",
>> +      .data = &qdu1000_clk_virt
>> +    },
>> +    { .compatible = "qcom,qdu1000-gem-noc",
>> +      .data = &qdu1000_gem_noc
>> +    },
>> +    { .compatible = "qcom,qdu1000-mc-virt",
>> +      .data = &qdu1000_mc_virt
>> +    },
>> +    { .compatible = "qcom,qdu1000-system-noc",
>> +      .data = &qdu1000_system_noc
>> +    },
>> +    { }
>> +};
>> +MODULE_DEVICE_TABLE(of, qnoc_of_match);
>> +
>> +static struct platform_driver qnoc_driver = {
>> +    .probe = qnoc_probe,
>> +    .remove = qnoc_remove,
>> +    .driver = {
>> +        .name = "qnoc-qdu1000",
>> +        .of_match_table = qnoc_of_match,
>> +    },
>> +};
>
> [...]
>

\
 
 \ /
  Last update: 2022-11-21 18:55    [W:0.057 / U:0.132 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site