lkml.org 
[lkml]   [2022]   [Nov]   [21]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
SubjectRe: [RFC] ACPI: PCC: Support shared interrupt for multiple subspaces
From
On 11/19/2022 2:32 AM, lihuisong (C) wrote:
>
> 在 2022/11/18 2:09, Robbie King 写道:
>> On 11/7/2022 1:24 AM, lihuisong (C) wrote:
>>>
>>> 在 2022/11/4 23:39, Robbie King 写道:
>>>> On 11/4/2022 11:15 AM, Sudeep Holla wrote:
>>>>> On Fri, Nov 04, 2022 at 11:04:22AM -0400, Robbie King wrote:
>>>>>> Hello Huisong, your raising of the shared interrupt issue is very timely, I
>>>>>> am working to implement "Extended PCC subspaces (types 3 and 4)" using PCC
>>>>>> on the ARM RDN2 reference platform as a proof of concept, and encountered
>>>>>> this issue as well.  FWIW, I am currently testing using Sudeep's patch with
>>>>>> the "chan_in_use" flag removed, and so far have not encountered any issues.
>>>>>>
>>>>>
>>>>> Interesting, do you mean the patch I post in this thread but without the
>>>>> whole chan_in_use flag ?
>>>>
>>>> That's right, diff I'm running with is attached to end of message.
>>> Hello Robbie, In multiple subspaces scenario, there is a problem
>>> that OS doesn't know which channel should respond to the interrupt
>>> if no this chan_in_use flag. If you have not not encountered any
>>> issues in this case, it may be related to your register settings.
>>>
>>
>> Hi Huisong, apologies, I see your point now concerning multiple subspaces.
>>
>> I have started stress testing where I continuously generate both requests
>> and notifications as quickly as possible, and unfortunately found an issue
>> even with the original chan_in_use patch.  I first had to modify the patch
>> to get the type 4 channel notifications to function at all, essentially
>> ignoring the chan_in_use flag for that channel.  With that change, I still
>> hit my original stress issue, where the pcc_mbox_irq function did not
>> correctly ignore an interrupt for the type 3 channel.
>>
>> The issue occurs when a request from AP to SCP over the type 3 channel is
>> outstanding, and simultaneously the SCP initiates a notification over the
>> type 4 channel.  Since the two channels share an interrupt, both handlers
>> are invoked.
>>
>> I've tried to draw out the state of the channel status "free" bits along
>> with the AP and SCP function calls involved.
>>
>> type 3
>> ------
>>
>>  (1)pcc.c:pcc_send_data()
>>        |                         (5) mailbox.c:mbox_chan_receive_data()
>> _______v                      (4)pcc.c:pcc_mbox_irq()
>> free   \_________________________________________
>>
>>                               ^
>> type 4                        ^
>> ------                        ^
>> _____________________
>> free                 \_____________________________
>>                      ^        ^
>>                      |        |
>> (2)mod_smt.c:smt_transmit()   |
>>                               |
>> (3)mod_mhu2.c:raise_interrupt()
>>
>> The sequence of events are:
>>
>> 1) OS initiates request to SCP by clearing FREE in status and ringing SCP doorbell
>> 2) SCP initiates notification by filling shared memory and clearing FREE in status
>> 3) SCP notifies OS by ringing OS doorbell
>> 4) OS first invokes interrupt handler for type 3 channel
>>
>>    At this step, the issue is that "val" from reading status (i.e. CommandCompleteCheck)
>>    is zero (SCP has not responded yet) so the code below falls through and continues
>>    to processes the interrupt as if the request has been acknowledged by the SCP.
>>
>>     if (val) { /* Ensure GAS exists and value is non-zero */
>>         val &= pchan->cmd_complete.status_mask;
>>         if (!val)
>>             return IRQ_NONE;
>>     }
>>
>>    The chan_in_use flag does not address this because the channel is indeed in use.
>>
>> 5) ACPI:PCC client kernel module is incorrectly notified that response data is
>>    available
> Indeed, chan_in_use flag is invalid for type4.

Thinking about this some more, I believe there is a need for the chan_in_use flag
for the type 4 channels. If there are multiple SCP to AP channels sharing an
interrupt, and the PCC client code chooses to acknowledge the transfer from
process level (i.e. call mbox_send outside of the mbox_chan_received_data callback),
then I believe a window exists where the callback could be invoked twice for the
same SCP to AP channel. I've attached a diff.

>> I added the following fix (applied on top of Sudeep's original patch for clarity)
>> for the issue above which solved the stress test issue.  I've changed the interrupt
>> handler to explicitly verify that the status value matches the mask for type 3
>> interrupts before acknowledging them.  Conversely, a type 4 channel verifies that
>> the status value does *not* match the mask, since in this case we are functioning
>> as the recipient, not the initiator.
>>
>> One concern is that since this fundamentally changes handling of the channel status,
>> that existing platforms could be impacted.
> [snip]
>>
>> +    /*
>> +     * When we control data flow on the channel, we expect
>> +     * to see the mask bit(s) set by the remote to indicate
>> +     * the presence of a valid response.  When we do not
>> +     * control the flow (i.e. type 4) the opposite is true.
>> +     */
>> +    if (pchan->is_controller)
>> +        cmp = pchan->cmd_complete.status_mask;
>> +    else
>> +        cmp = 0;
>> +
>> +    val &= pchan->cmd_complete.status_mask;
>> +    if (cmp != val)
>> +        return IRQ_NONE;
>>
> We don't have to use the pchan->cmd_complete.status_mask as above.
>
> For the communication from AP to SCP, if this channel is in use, command
> complete bit is 1 indicates that the command being executed has been
> completed.
> For the communication from SCP to AP, if this channel is in use, command
> complete bit is 0 indicates that the bit has been cleared and OS should
> response the interrupt.
>
> So you concern should be gone if we do as following approach:
> "
> val &= pchan->cmd_complete.status_mask;
> need_rsp_irq = pchan->is_controller ? val != 0 : val == 0;
> if (!need_rsp_irq)
>     return IRQ_NONE
> "
>
> This may depend on the default value of the command complete register
> for each channel(must be 1, means that the channel is free for use).
> It is ok for type3 because of chan_in_use flag, while something needs
> to do in platform or OS for type4.
>> ret = pcc_chan_reg_read(&pchan->error, &val);
>>      if (ret)
>> @@ -704,6 +717,9 @@ static int pcc_mbox_probe(struct platform_device *pdev)
>>          pcc_mbox_channels[i].con_priv = pchan;
>>          pchan->chan.mchan = &pcc_mbox_channels[i];
>>
>> +        pchan->is_controller =
>> +            (pcct_entry->type != ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE);
>> +
> This definition does not apply to all types because type1 and type2
> support bidirectional communication.
>
>> if (pcct_entry->type == ACPI_PCCT_TYPE_EXT_PCC_SLAVE_SUBSPACE &&
>>              !pcc_mbox_ctrl->txdone_irq) {
>>              pr_err("Plaform Interrupt flag must be set to 1");
>>
>
> I put all points we discussed into the following modifcation.
> Robbie, can you try it again for type 4 and see what else needs to be
> done?
>
> Regards,
> Huisong
>

Thanks Huisong, I ran my current stress test scenario against your diff
with no issues (I did have to manually merge due to a tabs to spaces issue
which may be totally on my end, still investigating).

Here is the proposed change to support chan_in_use for type 4 (which I've
also successfully tested with). I think I have solved the tabs to spaces
issue for my sent messages, apologies if that's not the case.

diff --git a/drivers/mailbox/pcc.c b/drivers/mailbox/pcc.c
index 057e00ee83c8..d4fcc913a9a8 100644
--- a/drivers/mailbox/pcc.c
+++ b/drivers/mailbox/pcc.c
@@ -292,7 +292,7 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
int ret;

pchan = chan->con_priv;
- if (pchan->mesg_dir == PCC_ONLY_AP_TO_SCP && !pchan->chan_in_use)
+ if (!pchan->chan_in_use)
return IRQ_NONE;

ret = pcc_chan_reg_read(&pchan->cmd_complete, &val);
@@ -320,8 +320,16 @@ static irqreturn_t pcc_mbox_irq(int irq, void *p)
goto out;
}

+ /*
+ * Clearing in_use before RX callback allows calls to mbox_send
+ * (which sets in_use) within the callback so SCP to AP channels
+ * can acknowledge transfer within IRQ context
+ */
+ if (pchan->cmd_complete.gas)
+ pchan->chan_in_use = false;
+
mbox_chan_received_data(chan, NULL);
- rc = IRQ_HANDLED;
+ return IRQ_HANDLED;

out:
if (pchan->cmd_complete.gas)
@@ -772,6 +780,8 @@ static int pcc_mbox_probe(struct platform_device *pdev)
goto err;
}
pcc_set_chan_mesg_dir(pchan, pcct_entry->type);
+ if (pchan->mesg_dir == PCC_ONLY_SCP_TO_AP)
+ pchan->chan_in_use = true;

if (pcc_mbox_ctrl->txdone_irq) {
rc = pcc_parse_subspace_irq(pchan, pcct_entry);
\
 
 \ /
  Last update: 2022-11-21 17:59    [W:1.243 / U:0.088 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site