lkml.org 
[lkml]   [2022]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
Date
From
SubjectRe: [PATCH bpf-next v9 2/4] bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs
On Sun, Nov 20, 2022 at 10:40:02AM IST, David Vernet wrote:
> Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
> to the verifier that it should enforce that a BPF program passes it a
> "safe", trusted pointer. Currently, "safe" means that the pointer is
> either PTR_TO_CTX, or is refcounted. There may be cases, however, where
> the kernel passes a BPF program a safe / trusted pointer to an object
> that the BPF program wishes to use as a kptr, but because the object
> does not yet have a ref_obj_id from the perspective of the verifier, the
> program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
> kfunc.
>
> The solution is to expand the set of pointers that are considered
> trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
> with these pointers without getting rejected by the verifier.
>
> There is already a PTR_UNTRUSTED flag that is set in some scenarios,
> such as when a BPF program reads a kptr directly from a map
> without performing a bpf_kptr_xchg() call. These pointers of course can
> and should be rejected by the verifier. Unfortunately, however,
> PTR_UNTRUSTED does not cover all the cases for safety that need to
> be addressed to adequately protect kfuncs. Specifically, pointers
> obtained by a BPF program "walking" a struct are _not_ considered
> PTR_UNTRUSTED according to BPF. For example, say that we were to add a
> kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
> acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
> that a task was unsafe to pass to a kfunc, the verifier would mistakenly
> allow the following unsafe BPF program to be loaded:
>
> SEC("tp_btf/task_newtask")
> int BPF_PROG(unsafe_acquire_task,
> struct task_struct *task,
> u64 clone_flags)
> {
> struct task_struct *acquired, *nested;
>
> nested = task->last_wakee;
>
> /* Would not be rejected by the verifier. */
> acquired = bpf_task_acquire(nested);
> if (!acquired)
> return 0;
>
> bpf_task_release(acquired);
> return 0;
> }
>
> To address this, this patch defines a new type flag called PTR_TRUSTED
> which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
> KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
> passed directly from the kernel as a tracepoint or struct_ops callback
> argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
> pointer is no longer PTR_TRUSTED. From the example above, the struct
> task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
> obtained from 'task->last_wakee' is not PTR_TRUSTED.
>
> A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
> and then another patch will add selftests to validate.
>
> Signed-off-by: David Vernet <void@manifault.com>
> ---

Sorry that I couldn't look at it earlier.

> [...]
> @@ -5884,8 +5889,18 @@ static const struct bpf_reg_types scalar_types = { .types = { SCALAR_VALUE } };
> static const struct bpf_reg_types context_types = { .types = { PTR_TO_CTX } };
> static const struct bpf_reg_types ringbuf_mem_types = { .types = { PTR_TO_MEM | MEM_RINGBUF } };
> static const struct bpf_reg_types const_map_ptr_types = { .types = { CONST_PTR_TO_MAP } };
> -static const struct bpf_reg_types btf_ptr_types = { .types = { PTR_TO_BTF_ID } };
> -static const struct bpf_reg_types percpu_btf_ptr_types = { .types = { PTR_TO_BTF_ID | MEM_PERCPU } };
> +static const struct bpf_reg_types btf_ptr_types = {
> + .types = {
> + PTR_TO_BTF_ID,
> + PTR_TO_BTF_ID | PTR_TRUSTED,
> + },
> +};
> +static const struct bpf_reg_types percpu_btf_ptr_types = {
> + .types = {
> + PTR_TO_BTF_ID | MEM_PERCPU,
> + PTR_TO_BTF_ID | MEM_PERCPU | PTR_TRUSTED,

Where is PTR_TRUSTED set for MEM_PERCPU?

> + }
> +};
> static const struct bpf_reg_types func_ptr_types = { .types = { PTR_TO_FUNC } };
> static const struct bpf_reg_types stack_ptr_types = { .types = { PTR_TO_STACK } };
> static const struct bpf_reg_types const_str_ptr_types = { .types = { PTR_TO_MAP_VALUE } };
> @@ -5973,7 +5988,7 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno,
> return -EACCES;
>
> found:
> - if (reg->type == PTR_TO_BTF_ID) {
> + if (reg->type == PTR_TO_BTF_ID || reg->type & PTR_TRUSTED) {

Now, earlier MEM_ALLOC was supposed to not enter this branch. If your patch
allows MEM_ALLOC | PTR_TRUSTED (but I don't think it does), it will enter this
branch. I think it is better to just be explicit and say PTR_TO_BTF_ID ||
PTR_TO_BTF_ID | PTR_TRUSTED.

> /* For bpf_sk_release, it needs to match against first member
> * 'struct sock_common', hence make an exception for it. This
> * allows bpf_sk_release to work for multiple socket types.
> @@ -6055,6 +6070,8 @@ int check_func_arg_reg_off(struct bpf_verifier_env *env,
> */
> case PTR_TO_BTF_ID:
> case PTR_TO_BTF_ID | MEM_ALLOC:
> + case PTR_TO_BTF_ID | PTR_TRUSTED:
> + case PTR_TO_BTF_ID | MEM_ALLOC | PTR_TRUSTED:

This and the one below:

> @@ -8366,6 +8402,7 @@ static int check_reg_allocation_locked(struct bpf_verifier_env *env, struct bpf_
> ptr = reg->map_ptr;
> break;
> case PTR_TO_BTF_ID | MEM_ALLOC:
> + case PTR_TO_BTF_ID | MEM_ALLOC | PTR_TRUSTED:

I think this will never be set, based on my reading of the code.
Is the case with MEM_ALLOC | PTR_TRUSTED ever possible?
And if this is needed here, why not update btf_struct_access?
And KF_ARG_PTR_TO_ALLOC_BTF_ID is not updated either?
Let me know if I missed something.

> /* When referenced PTR_TO_BTF_ID is passed to release function,
> * it's fixed offset must be 0. In the other cases, fixed offset
> * can be non-zero.
> @@ -7939,6 +7956,25 @@ static bool is_kfunc_arg_kptr_get(struct bpf_kfunc_call_arg_meta *meta, int arg)
> return arg == 0 && (meta->kfunc_flags & KF_KPTR_GET);
> }
>
> +static bool is_trusted_reg(const struct bpf_reg_state *reg)
> +{
> + /* A referenced register is always trusted. */
> + if (reg->ref_obj_id)
> + return true;
> +
> + /* If a register is not referenced, it is trusted if it has either the
> + * MEM_ALLOC or PTR_TRUSTED type modifiers, and no others. Some of the
> + * other type modifiers may be safe, but we elect to take an opt-in
> + * approach here as some (e.g. PTR_UNTRUSTED and PTR_MAYBE_NULL) are
> + * not.
> + *
> + * Eventually, we should make PTR_TRUSTED the single source of truth
> + * for whether a register is trusted.
> + */
> + return type_flag(reg->type) & BPF_REG_TRUSTED_MODIFIERS &&
> + !bpf_type_has_unsafe_modifiers(reg->type);
> +}
> +
> static bool __kfunc_param_match_suffix(const struct btf *btf,
> const struct btf_param *arg,
> const char *suffix)
> @@ -8220,7 +8256,7 @@ static int process_kf_arg_ptr_to_btf_id(struct bpf_verifier_env *env,
> const char *reg_ref_tname;
> u32 reg_ref_id;
>
> - if (reg->type == PTR_TO_BTF_ID) {
> + if (base_type(reg->type) == PTR_TO_BTF_ID) {
> reg_btf = reg->btf;
> reg_ref_id = reg->btf_id;
> } else {
> ptr = reg->btf;
> break;
> default:
> @@ -8596,8 +8633,9 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_
> case KF_ARG_PTR_TO_BTF_ID:
> if (!is_kfunc_trusted_args(meta))
> break;
> - if (!reg->ref_obj_id) {
> - verbose(env, "R%d must be referenced\n", regno);
> +
> + if (!is_trusted_reg(reg)) {
> + verbose(env, "R%d must be referenced or trusted\n", regno);
> return -EINVAL;
> }
> fallthrough;
> @@ -8702,9 +8740,13 @@ static int check_kfunc_args(struct bpf_verifier_env *env, struct bpf_kfunc_call_
> break;
> case KF_ARG_PTR_TO_BTF_ID:
> /* Only base_type is checked, further checks are done here */
> - if (reg->type != PTR_TO_BTF_ID &&
> - (!reg2btf_ids[base_type(reg->type)] || type_flag(reg->type))) {
> - verbose(env, "arg#%d expected pointer to btf or socket\n", i);
> + if ((base_type(reg->type) != PTR_TO_BTF_ID ||
> + bpf_type_has_unsafe_modifiers(reg->type)) &&
> + !reg2btf_ids[base_type(reg->type)]) {
> + verbose(env, "arg#%d is %s ", i, reg_type_str(env, reg->type));
> + verbose(env, "expected %s or socket\n",
> + reg_type_str(env, base_type(reg->type) |
> + (type_flag(reg->type) & BPF_REG_TRUSTED_MODIFIERS)));
> return -EINVAL;
> }
> ret = process_kf_arg_ptr_to_btf_id(env, reg, ref_t, ref_tname, ref_id, meta, i);
> @@ -14713,6 +14755,7 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
> break;
> case PTR_TO_BTF_ID:
> case PTR_TO_BTF_ID | PTR_UNTRUSTED:
> + case PTR_TO_BTF_ID | PTR_TRUSTED:
> /* PTR_TO_BTF_ID | MEM_ALLOC always has a valid lifetime, unlike
> * PTR_TO_BTF_ID, and an active ref_obj_id, but the same cannot
> * be said once it is marked PTR_UNTRUSTED, hence we must handle
> @@ -14720,6 +14763,8 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
> * for this case.
> */
> case PTR_TO_BTF_ID | MEM_ALLOC | PTR_UNTRUSTED:
> + case PTR_TO_BTF_ID | PTR_UNTRUSTED | PTR_TRUSTED:

I feel this is confusing. What do we mean with PTR_UNTRUSTED | PTR_TRUSTED?

> + case PTR_TO_BTF_ID | PTR_UNTRUSTED | MEM_ALLOC | PTR_TRUSTED:

\
 
 \ /
  Last update: 2022-11-20 20:46    [W:0.100 / U:1.012 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site