lkml.org 
[lkml]   [2022]   [Nov]   [20]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: BUG: BISECTED: in squashfs_xz_uncompress() (Was: RCU stalls in squashfs_readahead())
From
On 20. 11. 2022. 18:50, Paul E. McKenney wrote:
> On Sun, Nov 20, 2022 at 04:49:37PM +0100, Mirsad Goran Todorovac wrote:
>> On 18. 11. 2022. 16:55, Paul E. McKenney wrote:
>>> On Fri, Nov 18, 2022 at 06:11:16AM +0000, Phillip Lougher wrote:
>>>> On 17/11/2022 23:05, Mirsad Goran Todorovac wrote:
>>>>> Hi,
>>>>>
>>>>> While trying to bisect, I've found another bug that predated the
>>>>> introduction of squashfs_readahead(), but it has
>>>>> a common denominator in squashfs_decompress() and squashfs_xz_uncompress().
>>>>
>>>> Wrong, the stall is happening in the XZ decompressor library, which
>>>> is *not* in Squashfs.
>>>>
>>>> This reported stall in the decompressor code is likely a symptom of you
>>>> deliberately thrashing your system. When the system thrashes everything
>>>> starts to happen very slowly, and the system will spend a lot of
>>>> its time doing page I/O, and the CPU will spend a lot of time in
>>>> any CPU intensive code like the XZ decompressor library.
>>>>
>>>> So the fact the stall is being hit here is a symptom and not
>>>> a cause. The decompressor code is likely running slowly due to
>>>> thrashing and waiting on paged-out buffers. This is not indicative
>>>> of any bug, merely a system running slowly due to overload.
>>>>
>>>> As I said, this is not a Squashfs issue, because the code when the
>>>> stall takes place isn't in Squashfs.
>>>>
>>>> The people responsible for the rcu code should have a lot more insight
>>>> about what happens when the system is thrashing, and how this will
>>>> throw up false positives. In this I believe this is an instance of
>>>> perfectly correct code running slowly due to thrashing incorrectly
>>>> being flagged as looping.
>>>>
>>>> CC'ing Paul E. McKenney <paulmck@kernel.org>
>>>>
>>>>> Frankly, I need an advice on how to handle a situation like this.
>>>>>
>>>>> Obviously, the best place to test the RCU problem with
>>>>> squashfs_readahead() is where it is introduced + Phillip's patches
>>>>> [012]/3.
>>>>>
>>>>> Thanks,
>>>>> Mirsad
>>>>>
>>>>> P.S.
>>>>>
>>>>> This is excerpt from dmesg log attached:
>>>>>
>>>>> [   25.338169] rcu: INFO: rcu_preempt detected expedited stalls on
>>>>> CPUs/tasks: { 4-... } 6 jiffies s: 373 root: 0x10/.
>>>
>>> The "6 jiffies" leads me to believe that this kernel was built with
>>> CONFIG_ANDROID=y, but also with the short expedited grace-period commit,
>>> that is, with CONFIG_RCU_EXP_CPU_STALL_TIMEOUT set to 20 milliseconds
>>> and with HZ set to something like 250. This means that the kernel
>>> will complain if an RCU read-side critical section exceeeds about 20
>>> milliseconds. This is a fine thing if you are actually running on an
>>> Android, but a bit extreme for general usage.
>>>
>>> If my guesses are correct, please apply this commit from mainline:
>>>
>>> 1045a06724f3 ("remove CONFIG_ANDROID")
>>>
>>> With this commit in place, CONFIG_RCU_EXP_CPU_STALL_TIMEOUT will default
>>> to 21000 (that is, 21 seconds) and things will be much better.
>
> Please apply the commit called out above and rerun your test.
>
> But if you still cannot bring yourself to do that, more interspersed
> below...
>
>> Dear Paul,
>>
>> Actually, I was able to reproduce and bisect the commit that started causing
>> described stalls (I have already explained how 5.10 didn't show any under the
>> exactly same saved widows and tabs set.)
>>
>> # bad: [1e57930e9f4083ad5854ab6eadffe790a8167fb4] Merge tag
>> 'rcu.2022.05.19a' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
>> git bisect bad 1e57930e9f4083ad5854ab6eadffe790a8167fb4
>> # good: [f993aed406eaf968ba3867a76bb46c95336a33d0] Merge tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block
>> git bisect good f993aed406eaf968ba3867a76bb46c95336a33d0
>> # good: [bf2431021c8cfe52c866d7bf640ced03a35ebe91] Merge tag
>> 'efi-next-for-v5.19' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
>> git bisect good bf2431021c8cfe52c866d7bf640ced03a35ebe91
>> # good: [be05ee54378d451e1d60196921566d6087f3079f] Merge branches
>> 'docs.2022.04.20a', 'fixes.2022.04.20a', 'nocb.2022.04.11b',
>> 'rcu-tasks.2022.04.11b', 'srcu.2022.
>> 05.03a', 'torture.2022.04.11b', 'torture-tasks.2022.04.20a' and 'torturescript.2022.04.20a' into HEAD
>> git bisect good be05ee54378d451e1d60196921566d6087f3079f
>> # good: [023033fe343cdf2ba83ab762f8de69241c7fc086] tools/nolibc/types: define PATH_MAX and MAXPATHLEN
>> git bisect good 023033fe343cdf2ba83ab762f8de69241c7fc086
>> # good: [96980b833a21c6dc29d0dfdc8f211fb8a10256a7] tools/nolibc/string: do not use __builtin_strlen() at -O0
>> git bisect good 96980b833a21c6dc29d0dfdc8f211fb8a10256a7
>> # good: [0e0ff638400be8f497a35b51a4751fd823f6bd6a] tools/nolibc/stdlib: Implement `malloc()`, `calloc()`, `realloc()` and `free()`
>> git bisect good 0e0ff638400be8f497a35b51a4751fd823f6bd6a
>> # good: [b2f02e9cdaade3ce565e6973ac313d2f814447f2] Merge tag
>> 'lkmm.2022.05.20a' of
>> git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
>> git bisect good b2f02e9cdaade3ce565e6973ac313d2f814447f2
>> # good: [9621fbee44df940e2e1b94b0676460a538dffefa] rcu: Move expedited grace period (GP) work to RT kthread_worker
>> git bisect good 9621fbee44df940e2e1b94b0676460a538dffefa
>> # bad: [ce13389053a347aa9f8ffbfda2238352536e15c9] Merge branch 'exp.2022.05.11a' into HEAD
>> git bisect bad ce13389053a347aa9f8ffbfda2238352536e15c9
>> # first bad commit: [ce13389053a347aa9f8ffbfda2238352536e15c9] Merge branch 'exp.2022.05.11a' into HEAD
>
> More precisely, this commit:
>
> 28b3ae426598 ("rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT")
>
> The idea was to cause Android-based systems to have 20-millisecond
> expedited RCU CPU stall warnings, but to leave other kernels at the
> traditional 21-second value. Again, the "6 jiffies" below indicates
> that you are running a kernel with CONFIG_RCU_EXP_CPU_STALL_TIMEOUT=0
> and CONFIG_ANDROID=y.
>
> Except that there were a lot of non-Android systems (including Debian
> and Fedora) that have nothing to do with Android, but that nevertheless
> build their kernels with CONFIG_ANDROID=y, which no doubt seemed like
> a good idea at the time.
>
> For more information, please see https://lwn.net/Articles/899743/
>
> The upshot of the discussion was this same commit that I pointed out
> earlier that removes CONFIG_ANDROID completely:
>
> 1045a06724f3 ("remove CONFIG_ANDROID")
>
> Again, please apply this commit and rerun your test.
>
>> The bug looks like this:
>>
>> [ 57.876820] rcu: INFO: rcu_preempt detected expedited stalls on CPUs/tasks: { 0-... } 6 jiffies s: 545 root: 0x1/.
>
> Yes, again "6 jiffies" which is roughly the 20 milliseconds set for
> kernels built with CONFIG_ANDROID=y and HZ=250 that have this commit:
>
> 28b3ae426598 ("rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT")
>
> But not this commit:
>
> 1045a06724f3 ("remove CONFIG_ANDROID")
>
> Yet again, please apply this commit and rerun your test.
>
>> [ 57.876854] rcu: blocking rcu_node structures (internal RCU debug):
>> [ 57.876862] Task dump for CPU 0:
>> [ 57.876867] task:snap-store state:R running task stack: 0 pid: 2678 ppid: 2230 flags:0x00004008
>> [ 57.876883] Call Trace:
>> [ 57.876888] <TASK>
>> [ 57.876893] ? _raw_spin_lock_irqsave+0x93/0xf0
>> [ 57.876909] ? sysvec_apic_timer_interrupt+0x89/0x90
>> [ 57.876920] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
>> [ 57.876930] ? sysvec_apic_timer_interrupt+0x89/0x90
>> [ 57.876939] ? sysvec_apic_timer_interrupt+0x89/0x90
>> [ 57.876948] ? asm_sysvec_apic_timer_interrupt+0x12/0x20
>> [ 57.876959] ? lzma_len+0x1fb/0x3b0
>> [ 57.876971] ? dict_repeat+0xb3/0x120
>> [ 57.876981] ? lzma_main+0x943/0x1260
>> [ 57.876995] ? lzma2_lzma+0x2a4/0x3b0
>> [ 57.877007] ? xz_dec_lzma2_run+0x11f/0xb90
>> [ 57.877018] ? crc32_le_base+0x186/0x250
>> [ 57.877032] ? xz_dec_run+0x346/0x11e0
>> [ 57.877046] ? squashfs_xz_uncompress+0x135/0x330
>> [ 57.877060] ? lzo_init+0xd0/0xd0
>> [ 57.877069] ? squashfs_decompress+0x80/0xb0
>> [ 57.877079] ? squashfs_read_data+0x1eb/0x920
>> [ 57.877090] ? __filemap_get_folio+0x37e/0x540
>> [ 57.877104] ? squashfs_bio_read.isra.2+0x2a0/0x2a0
>> [ 57.877118] ? squashfs_readpage_block+0x493/0x950
>> [ 57.877131] ? squashfs_readpage+0xa52/0x1140
>> [ 57.877143] ? xas_nomem+0x2f/0x100
>> [ 57.877154] ? squashfs_copy_cache+0x360/0x360
>> [ 57.877164] ? folio_wait_bit+0x3c0/0x3c0
>> [ 57.877175] ? __kasan_check_read+0x11/0x20
>> [ 57.877186] ? pagevec_add_and_need_flush+0x8c/0xa0
>> [ 57.877197] ? folio_add_lru+0x42/0x70
>> [ 57.877206] ? filemap_add_folio+0xd4/0x130
>> [ 57.877216] ? add_to_page_cache_locked+0xa0/0xa0
>> [ 57.877228] ? filemap_read_folio.isra.62+0xbe/0x4d0
>> [ 57.877238] ? __kasan_check_write+0x14/0x20
>> [ 57.877248] ? filemap_page_mkwrite+0x6a0/0x6a0
>> [ 57.877260] ? filemap_add_folio+0x130/0x130
>> [ 57.877269] ? try_charge_memcg+0x4cc/0xa90
>> [ 57.877281] ? filemap_fault+0xc9a/0xe50
>> [ 57.877293] ? generic_file_read_iter+0x230/0x230
>> [ 57.877305] ? __rcu_read_unlock+0x55/0x260
>> [ 57.877317] ? __do_fault+0x7c/0x1b0
>> [ 57.877329] ? __handle_mm_fault+0x173b/0x1970
>> [ 57.877340] ? copy_page_range+0x1890/0x1890
>> [ 57.877356] ? handle_mm_fault+0x11b/0x380
>> [ 57.877366] ? do_user_addr_fault+0x258/0x810
>> [ 57.877380] ? exc_page_fault+0x60/0xe0
>> [ 57.877389] ? asm_exc_page_fault+0x8/0x30
>> [ 57.877398] ? asm_exc_page_fault+0x1e/0x30
>> [ 57.877410] </TASK>
>>
>> Please find complete dmesg, my lshw and bisect attached.
>>
>> I am not competent to estimate how this commit causes this kind of problems,
>> and whether stalls up to 20 jiffies are worth eradicating.
>
> The Android folks believe that they are on Android platforms, as you
> can see from the commit log on:
>
> 28b3ae426598 ("rcu: Introduce CONFIG_RCU_EXP_CPU_STALL_TIMEOUT")
>
> But this would be excessive on many other platforms, especially those
> with large quantities of CPUs, devices, or memory.
>
>> Hope this helps.
>
> Likewise!
>
> Thanx, Paul

Dear Mr. McKenney,

And what about the Mr. Robert Elliott's observation about calling conf_recshed()?

> How big can these readahead sizes be? Should one of the loops include
> cond_resched() calls?

That is IMHO better than allowing 21000 milisecond stalls on a core (or more of them).

I don't think it is correct to stay in kernel mode for more than an timer unit
without yielding the CPU. It creates stalls in multimedia and audio (chirps like on scratched
CD-ROMs). This is especially noticeable with a KASAN build.

Since Firefox and most snaps are using squashfs as compressed ROFS, the Firefox appears
to perform poorer since snaps are introduced than Chrome.

IMHO, if we want something like realtime and multimedia processing (which is the specific
area of my research), it seems that anything trying to hold processor for 21000 ms (21 secs)
is either buggy or deliberately malicious. 20 ms is quite enough of work for a threat
in one allotted timeslot.

I do not agree with Mr. Lougher's observation that I am thrashing my laptop. I think that
a system has to endure stress and torture testing. I was raised on Digital MicroVAX systems
on Ultrix which compiled lab at a time in memory that would today sound funny. :)

Besides, this is the very idea behind the MG-LRU algorithm commit, to test eviction of
memory pages in the system with heavy load and low on memory.

I will probably test your commits, but now I have to do my own evening ritual, unwinding,
and knowledge and memory consolidation (called "sleep").

I appreciate your lots of commits on the kernel.org and I hope I do not sound like
I am thinking you are a village idiot :(

I am trying to adhere to the Code of Conduct with mutual respect and politeness.

I know that the Linux kernel is about 30 million lines by now, and by the security experts
we should expect 30,000 bugs in such a solid piece of written code (one per thousand of
lines). Only Mr. Thorsten mentioned 950 unresolved in the "open" list.

Knowing all of this is difficult, but I still believe in open source and open systems
interconnected.

Of course, I always remember a proverb "Who hath despised the day of the small beginnings?"

Hope this helps. My $0.02.

Thank you,
Mirsad

--
Mirsad Goran Todorovac
Sistem inženjer
Grafički fakultet | Akademija likovnih umjetnosti
Sveučilište u Zagrebu
--
System engineer
Faculty of Graphic Arts | Academy of Fine Arts
University of Zagreb, Republic of Croatia
The European Union

\
 
 \ /
  Last update: 2022-11-20 19:37    [W:0.065 / U:2.148 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site