lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
SubjectRe: [PATCH] ath11k: Fix QCN9074 firmware boot on x86
From
Date
"Tyler J. Stachecki" <stachecki.tyler@gmail.com> wrote:

> The 2.7.0 series of QCN9074's firmware requests 5 segments
> of memory instead of 3 (as in the 2.5.0 series).
>
> The first segment (11M) is too large to be kalloc'd in one
> go on x86 and requires piecemeal 1MB allocations, as was
> the case with the prior public firmware (2.5.0, 15M).
>
> Since f6f92968e1e5, ath11k will break the memory requests,
> but only if there were fewer than 3 segments requested by
> the firmware. It seems that 5 segments works fine and
> allows QCN9074 to boot on x86 with firmware 2.7.0, so
> change things accordingly.
>
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
> Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01208-QCAHKSWPL_SILICONZ-1
> Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.16
>
> Signed-off-by: Tyler J. Stachecki <stachecki.tyler@gmail.com>
> Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>

Patch applied to ath-current branch of ath.git, thanks.

3a89b6dec992 wifi: ath11k: Fix QCN9074 firmware boot on x86

--
https://patchwork.kernel.org/project/linux-wireless/patch/20221022042728.43015-1-stachecki.tyler@gmail.com/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches

\
 
 \ /
  Last update: 2022-11-02 18:17    [W:0.025 / U:0.296 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site