lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH v1 2/6] arm64: dts: verdin-imx8mp: remove usb_2 over-current detection disabling
    Date
    From: Marcel Ziswiler <marcel.ziswiler@toradex.com>

    The disable-over-current property is only applicable for the
    ci-hdrc-usb2 and dwc2 drivers while the i.MX 8M Plus integrates dwc3
    IP. Therefore remove this property which does not really serve any
    purpose here.

    Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
    ---

    arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi | 1 -
    1 file changed, 1 deletion(-)

    diff --git a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
    index 97e88440a251..57cddf1bf6b3 100644
    --- a/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
    +++ b/arch/arm64/boot/dts/freescale/imx8mp-verdin.dtsi
    @@ -828,7 +828,6 @@ &usb3_phy1 {
    };

    &usb_dwc3_1 {
    - disable-over-current;
    dr_mode = "host";
    };

    --
    2.36.1
    \
     
     \ /
      Last update: 2022-11-02 14:19    [W:2.471 / U:0.032 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site