lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH] mmc: sdhci-of-arasan: Add support for dynamic configuration
From
On 19/10/22 08:48, Sai Krishna Potthuri wrote:
> Add dynamic configuration support for Xilinx ZynqMP which takes care of
> configuring the SD secure space configuration registers using EEMI APIs,
> performing SD reset assert and deassert.
> High level sequence:
> - Check for the PM dynamic configuration support, if no error proceed with
> SD dynamic configurations(next steps) otherwise skip the dynamic
> configuration.
> - Put the SD Controller in reset.
> - Configure SD Fixed configurations.
> - Configure the SD Slot Type.
> - Configure the BASE_CLOCK.
> - Configure the 8-bit support.
> - Bring the SD Controller out of reset.
> - Wait for 1msec delay.
>
> Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>

Can we get an Ack from xilinx folks?

> ---
> drivers/mmc/host/sdhci-of-arasan.c | 69 ++++++++++++++++++++++++++++++
> 1 file changed, 69 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-of-arasan.c b/drivers/mmc/host/sdhci-of-arasan.c
> index 3997cad1f793..f051f3802aff 100644
> --- a/drivers/mmc/host/sdhci-of-arasan.c
> +++ b/drivers/mmc/host/sdhci-of-arasan.c
> @@ -21,6 +21,7 @@
> #include <linux/of_device.h>
> #include <linux/phy/phy.h>
> #include <linux/regmap.h>
> +#include <linux/reset.h>
> #include <linux/of.h>
> #include <linux/firmware/xlnx-zynqmp.h>
>
> @@ -1521,6 +1522,65 @@ static int sdhci_arasan_register_sdclk(struct sdhci_arasan_data *sdhci_arasan,
> return 0;
> }
>
> +static int sdhci_zynqmp_set_dynamic_config(struct device *dev,
> + struct sdhci_arasan_data *sdhci_arasan)
> +{
> + struct sdhci_host *host = sdhci_arasan->host;
> + struct clk_hw *hw = &sdhci_arasan->clk_data.sdcardclk_hw;
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + const char *clk_name = clk_hw_get_name(hw);
> + u32 mhz, node_id = !strcmp(clk_name, "clk_out_sd0") ? NODE_SD_0 : NODE_SD_1;
> + struct reset_control *rstc;
> + int ret;
> +
> + /* Obtain SDHC reset control */
> + rstc = devm_reset_control_get_optional_exclusive(dev, NULL);
> + if (IS_ERR(rstc)) {
> + dev_err(dev, "Cannot get SDHC reset.\n");
> + return PTR_ERR(rstc);
> + }
> +
> + ret = reset_control_assert(rstc);
> + if (ret)
> + return ret;
> +
> + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_FIXED, 0);
> + if (ret)
> + return ret;
> +
> + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_EMMC_SEL,
> + !!(host->mmc->caps & MMC_CAP_NONREMOVABLE));
> + if (ret)
> + return ret;
> +
> + mhz = DIV_ROUND_CLOSEST_ULL(clk_get_rate(pltfm_host->clk), 1000000);
> + if (mhz > 100 && mhz <= 200)
> + mhz = 200;
> + else if (mhz > 50 && mhz <= 100)
> + mhz = 100;
> + else if (mhz > 25 && mhz <= 50)
> + mhz = 50;
> + else
> + mhz = 25;
> +
> + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_BASECLK, mhz);
> + if (ret)
> + return ret;
> +
> + ret = zynqmp_pm_set_sd_config(node_id, SD_CONFIG_8BIT,
> + !!(host->mmc->caps & MMC_CAP_8_BIT_DATA));
> + if (ret)
> + return ret;
> +
> + ret = reset_control_deassert(rstc);
> + if (ret)
> + return ret;
> +
> + usleep_range(1000, 1500);
> +
> + return 0;
> +}
> +
> static int sdhci_arasan_add_host(struct sdhci_arasan_data *sdhci_arasan)
> {
> struct sdhci_host *host = sdhci_arasan->host;
> @@ -1685,6 +1745,15 @@ static int sdhci_arasan_probe(struct platform_device *pdev)
> goto unreg_clk;
> }
>
> + if (of_device_is_compatible(np, "xlnx,zynqmp-8.9a")) {
> + ret = zynqmp_pm_is_function_supported(PM_IOCTL, IOCTL_SET_SD_CONFIG);
> + if (!ret) {
> + ret = sdhci_zynqmp_set_dynamic_config(dev, sdhci_arasan);
> + if (ret)
> + goto unreg_clk;
> + }
> + }
> +
> sdhci_arasan->phy = ERR_PTR(-ENODEV);
> if (of_device_is_compatible(np, "arasan,sdhci-5.1")) {
> sdhci_arasan->phy = devm_phy_get(dev, "phy_arasan");

\
 
 \ /
  Last update: 2022-11-02 10:57    [W:0.070 / U:0.200 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site