lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v5 06/16] x86: move some code out of arch/x86/kernel/cpu/mtrr
Date
Prepare making PAT and MTRR support independent from each other by
moving some code needed by both out of the MTRR specific sources.

Signed-off-by: Juergen Gross <jgross@suse.com>
---
V2:
- move code from cpu/common.c to cpu/cacheinfo.c (Borislav Petkov)
V4:
- carved out all non-movement modifications (Borislav Petkov)
---
arch/x86/kernel/cpu/cacheinfo.c | 77 ++++++++++++++++++++++++++++++
arch/x86/kernel/cpu/mtrr/generic.c | 74 ----------------------------
2 files changed, 77 insertions(+), 74 deletions(-)

diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c
index 5228fb9a3798..c6a17e21301e 100644
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -20,6 +20,8 @@
#include <asm/cacheinfo.h>
#include <asm/amd_nb.h>
#include <asm/smp.h>
+#include <asm/mtrr.h>
+#include <asm/tlbflush.h>

#include "cpu.h"

@@ -1043,3 +1045,78 @@ int populate_cache_leaves(unsigned int cpu)

return 0;
}
+
+/*
+ * Disable and enable caches. Needed for changing MTRRs and the PAT MSR.
+ *
+ * Since we are disabling the cache don't allow any interrupts,
+ * they would run extremely slow and would only increase the pain.
+ *
+ * The caller must ensure that local interrupts are disabled and
+ * are reenabled after cache_enable() has been called.
+ */
+static unsigned long saved_cr4;
+static DEFINE_RAW_SPINLOCK(cache_disable_lock);
+
+void cache_disable(void) __acquires(cache_disable_lock)
+{
+ unsigned long cr0;
+
+ /*
+ * Note that this is not ideal
+ * since the cache is only flushed/disabled for this CPU while the
+ * MTRRs are changed, but changing this requires more invasive
+ * changes to the way the kernel boots
+ */
+
+ raw_spin_lock(&cache_disable_lock);
+
+ /* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
+ cr0 = read_cr0() | X86_CR0_CD;
+ write_cr0(cr0);
+
+ /*
+ * Cache flushing is the most time-consuming step when programming
+ * the MTRRs. Fortunately, as per the Intel Software Development
+ * Manual, we can skip it if the processor supports cache self-
+ * snooping.
+ */
+ if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
+ wbinvd();
+
+ /* Save value of CR4 and clear Page Global Enable (bit 7) */
+ if (cpu_feature_enabled(X86_FEATURE_PGE)) {
+ saved_cr4 = __read_cr4();
+ __write_cr4(saved_cr4 & ~X86_CR4_PGE);
+ }
+
+ /* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
+ flush_tlb_local();
+
+ if (cpu_feature_enabled(X86_FEATURE_MTRR))
+ mtrr_disable();
+
+ /* Again, only flush caches if we have to. */
+ if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
+ wbinvd();
+}
+
+void cache_enable(void) __releases(cache_disable_lock)
+{
+ /* Flush TLBs (no need to flush caches - they are disabled) */
+ count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
+ flush_tlb_local();
+
+ if (cpu_feature_enabled(X86_FEATURE_MTRR))
+ mtrr_enable();
+
+ /* Enable caches */
+ write_cr0(read_cr0() & ~X86_CR0_CD);
+
+ /* Restore value of CR4 */
+ if (cpu_feature_enabled(X86_FEATURE_PGE))
+ __write_cr4(saved_cr4);
+
+ raw_spin_unlock(&cache_disable_lock);
+}
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 4edf0827f7ee..bfe13eedaca8 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -731,80 +731,6 @@ void mtrr_enable(void)
mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
}

-/*
- * Disable and enable caches. Needed for changing MTRRs and the PAT MSR.
- *
- * Since we are disabling the cache don't allow any interrupts,
- * they would run extremely slow and would only increase the pain.
- *
- * The caller must ensure that local interrupts are disabled and
- * are reenabled after cache_enable() has been called.
- */
-static unsigned long saved_cr4;
-static DEFINE_RAW_SPINLOCK(cache_disable_lock);
-
-void cache_disable(void) __acquires(cache_disable_lock)
-{
- unsigned long cr0;
-
- /*
- * Note that this is not ideal
- * since the cache is only flushed/disabled for this CPU while the
- * MTRRs are changed, but changing this requires more invasive
- * changes to the way the kernel boots
- */
-
- raw_spin_lock(&cache_disable_lock);
-
- /* Enter the no-fill (CD=1, NW=0) cache mode and flush caches. */
- cr0 = read_cr0() | X86_CR0_CD;
- write_cr0(cr0);
-
- /*
- * Cache flushing is the most time-consuming step when programming
- * the MTRRs. Fortunately, as per the Intel Software Development
- * Manual, we can skip it if the processor supports cache self-
- * snooping.
- */
- if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
- wbinvd();
-
- /* Save value of CR4 and clear Page Global Enable (bit 7) */
- if (boot_cpu_has(X86_FEATURE_PGE)) {
- saved_cr4 = __read_cr4();
- __write_cr4(saved_cr4 & ~X86_CR4_PGE);
- }
-
- /* Flush all TLBs via a mov %cr3, %reg; mov %reg, %cr3 */
- count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
- flush_tlb_local();
-
- if (cpu_feature_enabled(X86_FEATURE_MTRR))
- mtrr_disable();
-
- /* Again, only flush caches if we have to. */
- if (!static_cpu_has(X86_FEATURE_SELFSNOOP))
- wbinvd();
-}
-
-void cache_enable(void) __releases(cache_disable_lock)
-{
- /* Flush TLBs (no need to flush caches - they are disabled) */
- count_vm_tlb_event(NR_TLB_LOCAL_FLUSH_ALL);
- flush_tlb_local();
-
- if (cpu_feature_enabled(X86_FEATURE_MTRR))
- mtrr_enable();
-
- /* Enable caches */
- write_cr0(read_cr0() & ~X86_CR0_CD);
-
- /* Restore value of CR4 */
- if (boot_cpu_has(X86_FEATURE_PGE))
- __write_cr4(saved_cr4);
- raw_spin_unlock(&cache_disable_lock);
-}
-
static void generic_set_all(void)
{
unsigned long mask, count;
--
2.35.3
\
 
 \ /
  Last update: 2022-11-02 08:49    [W:0.230 / U:0.168 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site