lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 4/4] arm64: dts: qcom: add sdm670 and pixel 3a device trees
From
On 02/11/2022 16:26, Konrad Dybcio wrote:
>
> On 02/11/2022 00:57, Richard Acayan wrote:
>> The Qualcomm Snapdragon 670 has been out for a while. Add a device tree
>> for it and the Google Pixel 3a as the first device.
>>
>> The Pixel 3a has the same bootloader issue as the Pixel 3 and will not work
>> on Android 10 bootloaders or later until it gets fixed for the Pixel 3.
>>
>> SoC Initial Features:
>> - power management
>> - clocks
>> - pinctrl
>> - eMMC
>> - USB 2.0
>> - GENI I2C
>> - IOMMU
>> - RPMh
>> - interrupts
>>
>> Device-Specific Initial Features:
>> - side buttons (keys)
>> - regulators
>> - touchscreen
>>
>> Signed-off-by: Richard Acayan <mailingradian@gmail.com>
>> ---
>> arch/arm64/boot/dts/qcom/Makefile | 1 +
>> .../boot/dts/qcom/sdm670-google-sargo.dts | 519 +++++++
>> arch/arm64/boot/dts/qcom/sdm670.dtsi | 1216 +++++++++++++++++
>> 3 files changed, 1736 insertions(+)
>> create mode 100644 arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
>> create mode 100644 arch/arm64/boot/dts/qcom/sdm670.dtsi
>>
>> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
>> index b0558d3389e5..4eb5d8829efb 100644
>> --- a/arch/arm64/boot/dts/qcom/Makefile
>> +++ b/arch/arm64/boot/dts/qcom/Makefile
>> @@ -124,6 +124,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
>> +dtb-$(CONFIG_ARCH_QCOM) += sdm670-google-sargo.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
>> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
>> diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
>> new file mode 100644
>> index 000000000000..fa3dee78e442
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
>> @@ -0,0 +1,519 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Device tree for Google Pixel 3a, adapted from google-blueline device tree,
>> + * xiaomi-lavender device tree, and oneplus-common device tree.
>> + *
>> + * Copyright (c) 2022, Richard Acayan. All rights reserved.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/input/input.h>
>> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>> +#include <dt-bindings/power/qcom-rpmpd.h>
>> +#include "sdm670.dtsi"
>> +#include "pm660.dtsi"
>> +#include "pm660l.dtsi"
>> +
>> +/delete-node/ &mpss_region;
>> +/delete-node/ &venus_mem;
>> +/delete-node/ &wlan_msa_mem;
>> +/delete-node/ &cdsp_mem;
>> +/delete-node/ &mba_region;
>> +/delete-node/ &adsp_mem;
>> +/delete-node/ &ipa_fw_mem;
>> +/delete-node/ &ipa_gsi_mem;
>> +/delete-node/ &gpu_mem;
>> +
>> +/ {
>> + model = "Google Pixel 3a";
>> + compatible = "google,sargo", "qcom,sdm670";
>> + qcom,board-id = <0x00041e05 0>;
>> + qcom,msm-id = <321 0x20001>;
>> +
>> + aliases { };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> +
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> + ranges;
>> +
>> + framebuffer@9c000000 {
>> + compatible = "simple-framebuffer";
>> + reg = <0x0 0x9c000000 0x0 (1080 * 2220 * 4)>;
>> + width = <1080>;
>> + height = <2220>;
>> + stride = <(1080 * 4)>;
>> + format = "a8r8g8b8";
>> + };
>> + };
>> +
>> + reserved-memory {
>> + #address-cells = <2>;
>> + #size-cells = <2>;
>> +
>> + mpss_region: mpss@8b000000 {
>
> Please call the nodes memory@

I think the actual recommendation is to use the purpose as name:

https://lore.kernel.org/linux-arm-msm/CAL_Jsq+66j8Y5y+PQ+mezkaxN1pfHFKz524YUF4Lz_OU5E-mZQ@mail.gmail.com/

https://devicetree-specification.readthedocs.io/en/latest/chapter3-devicenodes.html#reserved-memory-child-nodes
(second paragraph)


Best regards,
Krzysztof

\
 
 \ /
  Last update: 2022-11-02 21:31    [W:0.078 / U:1.212 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site