lkml.org 
[lkml]   [2022]   [Nov]   [2]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2] dt-bindings: net: nxp,sja1105: document spi-cpol/cpha
Date
Some boards use SJA1105 Ethernet Switch with SPI CPOL and CPHA, so
document this to fix dtbs_check warnings:

arch/arm64/boot/dts/freescale/fsl-lx2160a-bluebox3.dtb: ethernet-switch@0: Unevaluated properties are not allowed ('spi-cpol' was unexpected)

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v1:
1. Add also cpha
---
Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
index 1e26d876d146..3debbf0f3789 100644
--- a/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/nxp,sja1105.yaml
@@ -36,6 +36,9 @@ properties:
reg:
maxItems: 1

+ spi-cpha: true
+ spi-cpol: true
+
# Optional container node for the 2 internal MDIO buses of the SJA1110
# (one for the internal 100base-T1 PHYs and the other for the single
# 100base-TX PHY). The "reg" property does not have physical significance.
--
2.34.1
\
 
 \ /
  Last update: 2022-11-02 19:53    [W:0.062 / U:0.352 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site