lkml.org 
[lkml]   [2022]   [Nov]   [19]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
From
SubjectRe: [PATCH 2/2] arm64: allwinner: a64: add device tree for SOPINE on Pine64 Clusterboard
On Sat, 19 Nov 2022 13:31:59 +0100
Renze Nicolai <renze@rnplus.nl> wrote:

> The Pine64 SOPINE Clusterboard is a mini-ITX sized board capable
> of hosting up-to 7 SOPINE modules. It is largely compatible
> with the SOPINE baseboard but it omits most of the in- and
> output interfaces. Also The Clusterboard needs a tx delay
> of 500ps for ethernet to work.
>
> Add a device tree for SOPINE on the Pine64 Clusterboard.
>
> Signed-off-by: Renze Nicolai <renze@rnplus.nl>
> ---
> arch/arm64/boot/dts/allwinner/Makefile | 1 +
> .../allwinner/sun50i-a64-sopine-clusterboard.dts | 16 ++++++++++++++++
> 2 files changed, 17 insertions(+)
> create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-
> clusterboard.dts
>
> diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/
> allwinner/Makefile
> index 6a96494a2e0a..15b011d1aaea 100644
> --- a/arch/arm64/boot/dts/allwinner/Makefile
> +++ b/arch/arm64/boot/dts/allwinner/Makefile
> @@ -15,6 +15,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinephone-1.2.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab-early-adopter.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb
> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-clusterboard.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a100-allwinner-perf1.dtb
> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb
> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-clusterboard.dts
> b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-clusterboard.dts
> new file mode 100644
> index 000000000000..f75325d43d76
> --- /dev/null
> +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-clusterboard.dts
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +// Copyright (c) 2022 Renze Nicolai <renze@rnplus.nl>
> +
> +/dts-v1/;

Since you include a complete .dts (not a .dtsi) below, you don't need
the dts-v1 tag, as this is provided by the baseboard.dts. That's the
same situation as with the Pine64 LTS.

Cheers,
Andre

> +
> +#include "sun50i-a64-sopine-baseboard.dts"
> +
> +/ {
> + model = "SOPINE with clusterboard";
> + compatible = "pine64,sopine-clusterboard", "pine64,sopine",
> + "allwinner,sun50i-a64";
> +};
> +
> +&emac {
> + allwinner,tx-delay-ps = <500>;
> +};

\
 
 \ /
  Last update: 2022-11-19 19:16    [W:0.036 / U:0.084 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site