Messages in this thread Patch in this message | | | From | Abel Vesa <> | Subject | [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: Add USB PHYs and HC nodes | Date | Wed, 16 Nov 2022 15:22:12 +0200 |
| |
Enable USB HC and PHYs nodes on SM8550 MTP board.
Signed-off-by: Abel Vesa <abel.vesa@linaro.org> --- arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts index d4c8d5b2497e..757cf4f7f195 100644 --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts @@ -417,3 +417,25 @@ data-pins { &uart7 { status = "okay"; }; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdd-supply = <&vreg_l1e_0p88>; + vdda12-supply = <&vreg_l3e_1p2>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l3e_1p2>; + vdda-pll-supply = <&vreg_l3f_0p91>; +}; -- 2.34.1
| |