Messages in this thread | | | Date | Wed, 16 Nov 2022 13:56:36 +0100 | Subject | Re: [PATCH 2/2] arm64: dts: qcom: sm8550-mtp: Add UFS host controller and PHY node | From | Konrad Dybcio <> |
| |
On 16/11/2022 13:51, Abel Vesa wrote: > Enable UFS host controller and PHY node on SM8550 MTP board. > > Signed-off-by: Abel Vesa <abel.vesa@linaro.org> > --- > arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 22 ++++++++++++++++++++++ > 1 file changed, 22 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > index d4c8d5b2497e..fef7793a7dec 100644 > --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts > @@ -417,3 +417,25 @@ data-pins { > &uart7 { > status = "okay"; > }; > + > +&ufs_mem_hc { > + status = "okay"; Status last, please.
> + > + reset-gpios = <&tlmm 210 GPIO_ACTIVE_LOW>; > + > + vcc-supply = <&vreg_l17b_2p5>; > + vcc-max-microamp = <1300000>; All these -microamp properties are downstream and do not exist in the mainline kernel. Remove them.
Konrad > + vccq-supply = <&vreg_l1g_1p2>; > + vccq-max-microamp = <1200000>; > + vccq2-supply = <&vreg_l3g_1p2>; > + vccq2-max-microamp = <100>; > +}; > + > +&ufs_mem_phy { > + status = "okay"; > + > + vdda-phy-supply = <&vreg_l1d_0p88>; > + vdda-phy-max-microamp = <188000>; > + vdda-pll-supply = <&vreg_l3e_1p2>; > + vdda-pll-max-microamp = <18300>; > +};
| |