lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 3/3] arm64: dts: qcom: sm8550-mtp: enable adsp, cdsp & mdss
From


On 16/11/2022 11:43, Neil Armstrong wrote:
> Add the aDSP, cDSP and MPSS firmware and "Devicetree" firmware paths
> for the SM8550 MTP platform.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
> arch/arm64/boot/dts/qcom/sm8550-mtp.dts | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> index d4c8d5b2497e..be06e25409c3 100644
> --- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> +++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
> @@ -376,6 +376,24 @@ &qupv3_id_0 {
> status = "okay";
> };
>
> +&remoteproc_adsp {
> + status = "okay";
> + firmware-name = "qcom/sm8550/adsp.mbn";
> + qcom,dtb-firmware-name = "qcom/sm8550/adsp_dtb.mbn";
status should go last. I missed that in the review of the patchset
introducing this DTS, please fix it over there as well.

Konrad
> +};
> +
> +&remoteproc_cdsp {
> + status = "okay";
> + firmware-name = "qcom/sm8550/cdsp.mbn";
> + qcom,dtb-firmware-name = "qcom/sm8550/cdsp_dtb.mbn";
> +};
> +
> +&remoteproc_mpss {
> + status = "okay";
> + firmware-name = "qcom/sm8550/modem.mbn";
> + qcom,dtb-firmware-name = "qcom/sm8550/modem_dtb.mbn";
> +};
> +
> &sdhc_2 {
> status = "okay";
>
>

\
 
 \ /
  Last update: 2022-11-16 12:57    [W:2.324 / U:0.008 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site