lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 6/6] i2c: qcom-geni: add support for I2C Master Hub variant
From


On 16/11/2022 11:21, Neil Armstrong wrote:
> The I2C Master Hub is a stripped down version of the GENI Serial Engine
> QUP Wrapper Controller but only supporting I2C serial engines without
> DMA support.
>
> This adds the I2C Master Hub serial engine compatible along the
> specific requirements in a new desc struct passed throug the device
> match data.
>
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>

Konrad
> drivers/i2c/busses/i2c-qcom-geni.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 75dd0718c5a1..bfe75038bc14 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -1026,8 +1026,16 @@ static const struct dev_pm_ops geni_i2c_pm_ops = {
> NULL)
> };
>
> +const struct geni_i2c_desc i2c_master_hub = {
> + .has_core_clk = true,
> + .icc_ddr = NULL,
> + .no_dma_support = true,
> + .tx_fifo_depth = 16,
> +};
> +
> static const struct of_device_id geni_i2c_dt_match[] = {
> { .compatible = "qcom,geni-i2c" },
> + { .compatible = "qcom,geni-i2c-master-hub", .data = &i2c_master_hub },
> {}
> };
> MODULE_DEVICE_TABLE(of, geni_i2c_dt_match);
>

\
 
 \ /
  Last update: 2022-11-16 11:50    [W:0.148 / U:0.648 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site