lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH 09/11] ASoC: wcd9335: switch to using gpiod API
Date
Switch the driver from legacy gpio API that is deprecated to the newer
gpiod API that respects line polarities described in ACPI/DT.

Also the old code did not actually request the reset line, but was
toggling it directly; this has been fixed.

Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
---
sound/soc/codecs/wcd9335.c | 33 ++++++++++++++++++---------------
1 file changed, 18 insertions(+), 15 deletions(-)

diff --git a/sound/soc/codecs/wcd9335.c b/sound/soc/codecs/wcd9335.c
index d2548fdf9ae5..27cbec3e6763 100644
--- a/sound/soc/codecs/wcd9335.c
+++ b/sound/soc/codecs/wcd9335.c
@@ -11,12 +11,13 @@
#include <linux/regulator/consumer.h>
#include <linux/clk.h>
#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
#include <linux/kernel.h>
#include <linux/slimbus.h>
#include <sound/soc.h>
#include <sound/pcm_params.h>
#include <sound/soc-dapm.h>
-#include <linux/of_gpio.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <sound/tlv.h>
@@ -329,7 +330,7 @@ struct wcd9335_codec {
int comp_enabled[COMPANDER_MAX];

int intr1;
- int reset_gpio;
+ struct gpio_desc *reset_gpio;
struct regulator_bulk_data supplies[WCD9335_MAX_SUPPLY];

unsigned int rx_port_value[WCD9335_RX_MAX];
@@ -5032,25 +5033,27 @@ static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
static int wcd9335_parse_dt(struct wcd9335_codec *wcd)
{
struct device *dev = wcd->dev;
- struct device_node *np = dev->of_node;
int ret;

- wcd->reset_gpio = of_get_named_gpio(np, "reset-gpios", 0);
- if (wcd->reset_gpio < 0) {
- dev_err(dev, "Reset GPIO missing from DT\n");
- return wcd->reset_gpio;
+ wcd->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
+ ret = PTR_ERR_OR_ZERO(wcd->reset_gpio);
+ if (ret) {
+ dev_err(dev, "failed to request reset GPIO: %d\n", ret);
+ return ret;
}

wcd->mclk = devm_clk_get(dev, "mclk");
- if (IS_ERR(wcd->mclk)) {
- dev_err(dev, "mclk not found\n");
- return PTR_ERR(wcd->mclk);
+ ret = PTR_ERR_OR_ZERO(wcd->mclk);
+ if (ret) {
+ dev_err(dev, "mclk not found: %d\n", ret);
+ return ret;
}

wcd->native_clk = devm_clk_get(dev, "slimbus");
- if (IS_ERR(wcd->native_clk)) {
- dev_err(dev, "slimbus clock not found\n");
- return PTR_ERR(wcd->native_clk);
+ ret = PTR_ERR_OR_ZERO(wcd->native_clk);
+ if (ret) {
+ dev_err(dev, "slimbus clock not found: %d\n", ret);
+ return ret;
}

wcd->supplies[0].supply = "vdd-buck";
@@ -5088,9 +5091,9 @@ static int wcd9335_power_on_reset(struct wcd9335_codec *wcd)
*/
usleep_range(600, 650);

- gpio_direction_output(wcd->reset_gpio, 0);
+ gpiod_set_value_cansleep(wcd->reset_gpio, 1);
msleep(20);
- gpio_set_value(wcd->reset_gpio, 1);
+ gpiod_set_value_cansleep(wcd->reset_gpio, 0);
msleep(20);

return 0;
--
2.38.1.431.g37b22c650d-goog
\
 
 \ /
  Last update: 2022-11-16 06:39    [W:0.108 / U:0.848 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site