lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH bpf-next v7 1/3] bpf: Allow trusted pointers to be passed to KF_TRUSTED_ARGS kfuncs
Date
Kfuncs currently support specifying the KF_TRUSTED_ARGS flag to signal
to the verifier that it should enforce that a BPF program passes it a
"safe", trusted pointer. Currently, "safe" means that the pointer is
either PTR_TO_CTX, or is refcounted. There may be cases, however, where
the kernel passes a BPF program a safe / trusted pointer to an object
that the BPF program wishes to use as a kptr, but because the object
does not yet have a ref_obj_id from the perspective of the verifier, the
program would be unable to pass it to a KF_ACQUIRE | KF_TRUSTED_ARGS
kfunc.

The solution is to expand the set of pointers that are considered
trusted according to KF_TRUSTED_ARGS, so that programs can invoke kfuncs
with these pointers without getting rejected by the verifier.

There is already a PTR_UNTRUSTED flag that is set in some scenarios,
such as when a BPF program reads a kptr directly from a map
without performing a bpf_kptr_xchg() call. These pointers of course can
and should be rejected by the verifier. Unfortunately, however,
PTR_UNTRUSTED does not cover all the cases for safety that need to
be addressed to adequately protect kfuncs. Specifically, pointers
obtained by a BPF program "walking" a struct are _not_ considered
PTR_UNTRUSTED according to BPF. For example, say that we were to add a
kfunc called bpf_task_acquire(), with KF_ACQUIRE | KF_TRUSTED_ARGS, to
acquire a struct task_struct *. If we only used PTR_UNTRUSTED to signal
that a task was unsafe to pass to a kfunc, the verifier would mistakenly
allow the following unsafe BPF program to be loaded:

SEC("tp_btf/task_newtask")
int BPF_PROG(unsafe_acquire_task,
struct task_struct *task,
u64 clone_flags)
{
struct task_struct *acquired, *nested;

nested = task->last_wakee;

/* Would not be rejected by the verifier. */
acquired = bpf_task_acquire(nested);
if (!acquired)
return 0;

bpf_task_release(acquired);
return 0;
}

To address this, this patch defines a new type flag called PTR_TRUSTED
which tracks whether a PTR_TO_BTF_ID pointer is safe to pass to a
KF_TRUSTED_ARGS kfunc or a BPF helper function. PTR_TRUSTED pointers are
passed directly from the kernel as a tracepoint or struct_ops callback
argument. Any nested pointer that is obtained from walking a PTR_TRUSTED
pointer is no longer PTR_TRUSTED. From the example above, the struct
task_struct *task argument is PTR_TRUSTED, but the 'nested' pointer
obtained from 'task->last_wakee' is not PTR_TRUSTED.

A subsequent patch will add kfuncs for storing a task kfunc as a kptr,
and then another patch will add selftests to validate.

Signed-off-by: David Vernet <void@manifault.com>
---
Documentation/bpf/kfuncs.rst | 30 ++++-----
include/linux/bpf.h | 30 +++++++++
include/linux/btf.h | 65 ++++++++++++-------
kernel/bpf/btf.c | 38 +++++++++--
kernel/bpf/verifier.c | 45 ++++++++-----
kernel/trace/bpf_trace.c | 2 +-
net/ipv4/bpf_tcp_ca.c | 4 +-
tools/testing/selftests/bpf/verifier/calls.c | 2 +-
.../selftests/bpf/verifier/ref_tracking.c | 4 +-
9 files changed, 154 insertions(+), 66 deletions(-)

diff --git a/Documentation/bpf/kfuncs.rst b/Documentation/bpf/kfuncs.rst
index 0f858156371d..67b7e2f46ec6 100644
--- a/Documentation/bpf/kfuncs.rst
+++ b/Documentation/bpf/kfuncs.rst
@@ -137,22 +137,20 @@ KF_ACQUIRE and KF_RET_NULL flags.
--------------------------

The KF_TRUSTED_ARGS flag is used for kfuncs taking pointer arguments. It
-indicates that the all pointer arguments will always have a guaranteed lifetime,
-and pointers to kernel objects are always passed to helpers in their unmodified
-form (as obtained from acquire kfuncs).
-
-It can be used to enforce that a pointer to a refcounted object acquired from a
-kfunc or BPF helper is passed as an argument to this kfunc without any
-modifications (e.g. pointer arithmetic) such that it is trusted and points to
-the original object.
-
-Meanwhile, it is also allowed pass pointers to normal memory to such kfuncs,
-but those can have a non-zero offset.
-
-This flag is often used for kfuncs that operate (change some property, perform
-some operation) on an object that was obtained using an acquire kfunc. Such
-kfuncs need an unchanged pointer to ensure the integrity of the operation being
-performed on the expected object.
+indicates that the all pointer arguments are valid, and that all pointers to
+BTF objects have been passed in their unmodified form (that is, at a zero
+offset, and without having been obtained from walking another pointer).
+
+There are two types of pointers to kernel objects which are considered "valid":
+
+1. Pointers which are passed as tracepoint or struct_ops callback arguments.
+2. Pointers which were returned from a KF_ACQUIRE or KF_KPTR_GET kfunc.
+
+Pointers to non-BTF objects (e.g. scalar pointers) may also be passed to
+KF_TRUSTED_ARGS kfuncs, and may have a non-zero offset.
+
+The definition of "valid" pointers is subject to change at any time, and has
+absolutely no ABI stability guarantees.

2.4.6 KF_SLEEPABLE flag
-----------------------
diff --git a/include/linux/bpf.h b/include/linux/bpf.h
index 54462dd28824..763ae250693e 100644
--- a/include/linux/bpf.h
+++ b/include/linux/bpf.h
@@ -524,6 +524,35 @@ enum bpf_type_flag {
/* Size is known at compile time. */
MEM_FIXED_SIZE = BIT(10 + BPF_BASE_TYPE_BITS),

+ /* PTR was passed from the kernel in a trusted context, and may be
+ * passed to KF_TRUSTED_ARGS kfuncs or BPF helper functions.
+ * Confusingly, this is _not_ the opposite of PTR_UNTRUSTED above.
+ * PTR_UNTRUSTED refers to a kptr that was read directly from a map
+ * without invoking bpf_kptr_xchg(). What we really need to know is
+ * whether a pointer is safe to pass to a kfunc or BPF helper function.
+ * While PTR_UNTRUSTED pointers are unsafe to pass to kfuncs and BPF
+ * helpers, they do not cover all possible instances of unsafe
+ * pointers. For example, a pointer that was obtained from walking a
+ * struct will _not_ get the PTR_UNTRUSTED type modifier, despite the
+ * fact that it may be NULL, invalid, etc. This is due to backwards
+ * compatibility requirements, as this was the behavior that was first
+ * introduced when kptrs were added. The behavior is now considered
+ * deprecated, and PTR_UNTRUSTED will eventually be removed.
+ *
+ * PTR_TRUSTED, on the other hand, is a pointer that the kernel
+ * guarantees to be valid and safe to pass to kfuncs and BPF helpers.
+ * For example, pointers passed to tracepoint arguments are considered
+ * PTR_TRUSTED, as are pointers that are passed to struct_ops
+ * callbacks. As alluded to above, pointers that are obtained from
+ * walking PTR_TRUSTED pointers are _not_ trusted. For example, if a
+ * struct task_struct *task is PTR_TRUSTED, then accessing
+ * task->last_wakee will lose the PTR_TRUSTED modifier when it's stored
+ * in a BPF register. Similarly, pointers passed to certain programs
+ * types such as kretprobes are not guaranteed to be valid, as they may
+ * for example contain an object that was recently freed.
+ */
+ PTR_TRUSTED = BIT(11 + BPF_BASE_TYPE_BITS),
+
__BPF_TYPE_FLAG_MAX,
__BPF_TYPE_LAST_FLAG = __BPF_TYPE_FLAG_MAX - 1,
};
@@ -617,6 +646,7 @@ enum bpf_return_type {
RET_PTR_TO_RINGBUF_MEM_OR_NULL = PTR_MAYBE_NULL | MEM_RINGBUF | RET_PTR_TO_MEM,
RET_PTR_TO_DYNPTR_MEM_OR_NULL = PTR_MAYBE_NULL | RET_PTR_TO_MEM,
RET_PTR_TO_BTF_ID_OR_NULL = PTR_MAYBE_NULL | RET_PTR_TO_BTF_ID,
+ RET_PTR_TO_BTF_ID_TRUSTED = PTR_TRUSTED | RET_PTR_TO_BTF_ID,

/* This must be the last entry. Its purpose is to ensure the enum is
* wide enough to hold the higher bits reserved for bpf_type_flag.
diff --git a/include/linux/btf.h b/include/linux/btf.h
index d80345fa566b..13b969e74d3b 100644
--- a/include/linux/btf.h
+++ b/include/linux/btf.h
@@ -17,36 +17,53 @@
#define KF_RELEASE (1 << 1) /* kfunc is a release function */
#define KF_RET_NULL (1 << 2) /* kfunc returns a pointer that may be NULL */
#define KF_KPTR_GET (1 << 3) /* kfunc returns reference to a kptr */
-/* Trusted arguments are those which are meant to be referenced arguments with
- * unchanged offset. It is used to enforce that pointers obtained from acquire
- * kfuncs remain unmodified when being passed to helpers taking trusted args.
+/* Trusted arguments are those which are guaranteed to be valid when passed to
+ * the kfunc. It is used to enforce that pointers obtained from either acquire
+ * kfuncs, or from the main kernel on a tracepoint or struct_ops callback
+ * invocation, remain unmodified when being passed to helpers taking trusted
+ * args.
*
- * Consider
- * struct foo {
- * int data;
- * struct foo *next;
- * };
+ * Consider, for example, the following new task tracepoint:
*
- * struct bar {
- * int data;
- * struct foo f;
- * };
+ * SEC("tp_btf/task_newtask")
+ * int BPF_PROG(new_task_tp, struct task_struct *task, u64 clone_flags)
+ * {
+ * ...
+ * }
*
- * struct foo *f = alloc_foo(); // Acquire kfunc
- * struct bar *b = alloc_bar(); // Acquire kfunc
+ * And the following kfunc:
*
- * If a kfunc set_foo_data() wants to operate only on the allocated object, it
- * will set the KF_TRUSTED_ARGS flag, which will prevent unsafe usage like:
+ * BTF_ID_FLAGS(func, bpf_task_acquire, KF_ACQUIRE | KF_TRUSTED_ARGS)
*
- * set_foo_data(f, 42); // Allowed
- * set_foo_data(f->next, 42); // Rejected, non-referenced pointer
- * set_foo_data(&f->next, 42);// Rejected, referenced, but wrong type
- * set_foo_data(&b->f, 42); // Rejected, referenced, but bad offset
+ * All invocations to the kfunc must pass the unmodified, unwalked task:
*
- * In the final case, usually for the purposes of type matching, it is deduced
- * by looking at the type of the member at the offset, but due to the
- * requirement of trusted argument, this deduction will be strict and not done
- * for this case.
+ * bpf_task_acquire(task); // Allowed
+ * bpf_task_acquire(task->last_wakee); // Rejected, walked task
+ *
+ * Programs may also pass referenced tasks directly to the kfunc:
+ *
+ * struct task_struct *acquired;
+ *
+ * acquired = bpf_task_acquire(task); // Allowed, same as above
+ * bpf_task_acquire(acquired); // Allowed
+ * bpf_task_acquire(task); // Allowed
+ * bpf_task_acquire(acquired->last_wakee); // Rejected, walked task
+ *
+ * Programs may _not_, however, pass a task from an arbitrary fentry/fexit, or
+ * kprobe/kretprobe to the kfunc, as BPF cannot guarantee that all of these
+ * pointers are guaranteed to be safe. For example, the following BPF program
+ * would be rejected:
+ *
+ * SEC("kretprobe/free_task")
+ * int BPF_PROG(free_task_probe, struct task_struct *tsk)
+ * {
+ * struct task_struct *acquired;
+ *
+ * acquired = bpf_task_acquire(acquired); // Rejected, not a trusted pointer
+ * bpf_task_release(acquired);
+ *
+ * return 0;
+ * }
*/
#define KF_TRUSTED_ARGS (1 << 4) /* kfunc only takes trusted pointer arguments */
#define KF_SLEEPABLE (1 << 5) /* kfunc may sleep */
diff --git a/kernel/bpf/btf.c b/kernel/bpf/btf.c
index 875355ff3718..8291f2911624 100644
--- a/kernel/bpf/btf.c
+++ b/kernel/bpf/btf.c
@@ -5579,6 +5579,11 @@ static u32 get_ctx_arg_idx(struct btf *btf, const struct btf_type *func_proto,
return nr_args + 1;
}

+static bool prog_type_args_trusted(enum bpf_prog_type prog_type)
+{
+ return prog_type == BPF_PROG_TYPE_TRACING || prog_type == BPF_PROG_TYPE_STRUCT_OPS;
+}
+
bool btf_ctx_access(int off, int size, enum bpf_access_type type,
const struct bpf_prog *prog,
struct bpf_insn_access_aux *info)
@@ -5722,6 +5727,9 @@ bool btf_ctx_access(int off, int size, enum bpf_access_type type,
}

info->reg_type = PTR_TO_BTF_ID;
+ if (prog_type_args_trusted(prog->type))
+ info->reg_type |= PTR_TRUSTED;
+
if (tgt_prog) {
enum bpf_prog_type tgt_type;

@@ -6558,15 +6566,26 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env,
/* These register types have special constraints wrt ref_obj_id
* and offset checks. The rest of trusted args don't.
*/
- obj_ptr = reg->type == PTR_TO_CTX || reg->type == PTR_TO_BTF_ID ||
+ obj_ptr = reg->type == PTR_TO_CTX ||
+ base_type(reg->type) == PTR_TO_BTF_ID ||
reg2btf_ids[base_type(reg->type)];

/* Check if argument must be a referenced pointer, args + i has
* been verified to be a pointer (after skipping modifiers).
* PTR_TO_CTX is ok without having non-zero ref_obj_id.
+ *
+ * All object pointers must be refcounted, other than:
+ * - PTR_TO_CTX
+ * - PTR_TRUSTED pointers
*/
- if (is_kfunc && trusted_args && (obj_ptr && reg->type != PTR_TO_CTX) && !reg->ref_obj_id) {
- bpf_log(log, "R%d must be referenced\n", regno);
+ if (is_kfunc &&
+ trusted_args &&
+ obj_ptr &&
+ base_type(reg->type) != PTR_TO_CTX &&
+ (!(type_flag(reg->type) & PTR_TRUSTED) ||
+ (type_flag(reg->type) & ~PTR_TRUSTED)) &&
+ !reg->ref_obj_id) {
+ bpf_log(log, "R%d must be referenced or trusted\n", regno);
return -EINVAL;
}

@@ -6646,8 +6665,8 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env,
i, btf_type_str(t));
return -EINVAL;
}
- } else if (is_kfunc && (reg->type == PTR_TO_BTF_ID ||
- (reg2btf_ids[base_type(reg->type)] && !type_flag(reg->type)))) {
+ } else if (is_kfunc && (base_type(reg->type) == PTR_TO_BTF_ID ||
+ (reg2btf_ids[base_type(reg->type)]))) {
const struct btf_type *reg_ref_t;
const struct btf *reg_btf;
const char *reg_ref_tname;
@@ -6660,7 +6679,13 @@ static int btf_check_func_arg_match(struct bpf_verifier_env *env,
return -EINVAL;
}

- if (reg->type == PTR_TO_BTF_ID) {
+ if ((type_flag(reg->type) & ~PTR_TRUSTED)) {
+ bpf_log(log, "kernel function %s arg#%d pointer had unexpected modifiers %d\n",
+ func_name, i, type_flag(reg->type));
+ return -EINVAL;
+ }
+
+ if (base_type(reg->type) == PTR_TO_BTF_ID) {
reg_btf = reg->btf;
reg_ref_id = reg->btf_id;
} else {
@@ -6988,6 +7013,7 @@ int btf_prepare_func_args(struct bpf_verifier_env *env, int subprog,
}

reg->type = PTR_TO_MEM | PTR_MAYBE_NULL;
+
reg->id = ++env->id_gen;

continue;
diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index 0312d9ce292f..f5b6b1f969d9 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -543,7 +543,7 @@ static bool is_cmpxchg_insn(const struct bpf_insn *insn)
static const char *reg_type_str(struct bpf_verifier_env *env,
enum bpf_reg_type type)
{
- char postfix[16] = {0}, prefix[32] = {0};
+ char postfix[16] = {0}, prefix[64] = {0};
static const char * const str[] = {
[NOT_INIT] = "?",
[SCALAR_VALUE] = "scalar",
@@ -575,16 +575,14 @@ static const char *reg_type_str(struct bpf_verifier_env *env,
strncpy(postfix, "_or_null", 16);
}

- if (type & MEM_RDONLY)
- strncpy(prefix, "rdonly_", 32);
- if (type & MEM_RINGBUF)
- strncpy(prefix, "ringbuf_", 32);
- if (type & MEM_USER)
- strncpy(prefix, "user_", 32);
- if (type & MEM_PERCPU)
- strncpy(prefix, "percpu_", 32);
- if (type & PTR_UNTRUSTED)
- strncpy(prefix, "untrusted_", 32);
+ snprintf(prefix, sizeof(prefix), "%s%s%s%s%s%s",
+ type & MEM_RDONLY ? "rdonly_" : "",
+ type & MEM_RINGBUF ? "ringbuf_" : "",
+ type & MEM_USER ? "user_" : "",
+ type & MEM_PERCPU ? "percpu_" : "",
+ type & PTR_UNTRUSTED ? "untrusted_" : "",
+ type & PTR_TRUSTED ? "trusted_" : ""
+ );

snprintf(env->type_str_buf, TYPE_STR_BUF_LEN, "%s%s%s",
prefix, str[base_type(type)], postfix);
@@ -3844,7 +3842,7 @@ static int map_kptr_match_type(struct bpf_verifier_env *env,
struct bpf_reg_state *reg, u32 regno)
{
const char *targ_name = kernel_type_name(kptr_field->kptr.btf, kptr_field->kptr.btf_id);
- int perm_flags = PTR_MAYBE_NULL;
+ int perm_flags = PTR_MAYBE_NULL | PTR_TRUSTED;
const char *reg_name = "";

/* Only unreferenced case accepts untrusted pointers */
@@ -4707,6 +4705,9 @@ static int check_ptr_to_btf_access(struct bpf_verifier_env *env,
if (type_flag(reg->type) & PTR_UNTRUSTED)
flag |= PTR_UNTRUSTED;

+ /* Any pointer obtained from walking a trusted pointer is no longer trusted. */
+ flag &= ~PTR_TRUSTED;
+
if (atype == BPF_READ && value_regno >= 0)
mark_btf_ld_reg(env, regs, value_regno, ret, reg->btf, btf_id, flag);

@@ -5774,6 +5775,7 @@ static const struct bpf_reg_types btf_id_sock_common_types = {
PTR_TO_TCP_SOCK,
PTR_TO_XDP_SOCK,
PTR_TO_BTF_ID,
+ PTR_TO_BTF_ID | PTR_TRUSTED,
},
.btf_id = &btf_sock_ids[BTF_SOCK_TYPE_SOCK_COMMON],
};
@@ -5807,9 +5809,19 @@ static const struct bpf_reg_types scalar_types = { .types = { SCALAR_VALUE } };
static const struct bpf_reg_types context_types = { .types = { PTR_TO_CTX } };
static const struct bpf_reg_types ringbuf_mem_types = { .types = { PTR_TO_MEM | MEM_RINGBUF } };
static const struct bpf_reg_types const_map_ptr_types = { .types = { CONST_PTR_TO_MAP } };
-static const struct bpf_reg_types btf_ptr_types = { .types = { PTR_TO_BTF_ID } };
+static const struct bpf_reg_types btf_ptr_types = {
+ .types = {
+ PTR_TO_BTF_ID,
+ PTR_TO_BTF_ID | PTR_TRUSTED,
+ },
+};
static const struct bpf_reg_types spin_lock_types = { .types = { PTR_TO_MAP_VALUE } };
-static const struct bpf_reg_types percpu_btf_ptr_types = { .types = { PTR_TO_BTF_ID | MEM_PERCPU } };
+static const struct bpf_reg_types percpu_btf_ptr_types = {
+ .types = {
+ PTR_TO_BTF_ID | MEM_PERCPU,
+ PTR_TO_BTF_ID | MEM_PERCPU | PTR_TRUSTED,
+ }
+};
static const struct bpf_reg_types func_ptr_types = { .types = { PTR_TO_FUNC } };
static const struct bpf_reg_types stack_ptr_types = { .types = { PTR_TO_STACK } };
static const struct bpf_reg_types const_str_ptr_types = { .types = { PTR_TO_MAP_VALUE } };
@@ -5897,7 +5909,7 @@ static int check_reg_type(struct bpf_verifier_env *env, u32 regno,
return -EACCES;

found:
- if (reg->type == PTR_TO_BTF_ID) {
+ if (base_type(reg->type) == PTR_TO_BTF_ID && !(type_flag(reg->type) & ~PTR_TRUSTED)) {
/* For bpf_sk_release, it needs to match against first member
* 'struct sock_common', hence make an exception for it. This
* allows bpf_sk_release to work for multiple socket types.
@@ -5973,6 +5985,7 @@ int check_func_arg_reg_off(struct bpf_verifier_env *env,
* fixed offset.
*/
case PTR_TO_BTF_ID:
+ case PTR_TO_BTF_ID | PTR_TRUSTED:
/* When referenced PTR_TO_BTF_ID is passed to release function,
* it's fixed offset must be 0. In the other cases, fixed offset
* can be non-zero.
@@ -13690,6 +13703,8 @@ static int convert_ctx_accesses(struct bpf_verifier_env *env)
break;
case PTR_TO_BTF_ID:
case PTR_TO_BTF_ID | PTR_UNTRUSTED:
+ case PTR_TO_BTF_ID | PTR_TRUSTED:
+ case PTR_TO_BTF_ID | PTR_UNTRUSTED | PTR_TRUSTED:
if (type == BPF_READ) {
insn->code = BPF_LDX | BPF_PROBE_MEM |
BPF_SIZE((insn)->code);
diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index f2d8d070d024..5b9008bc597b 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -774,7 +774,7 @@ BPF_CALL_0(bpf_get_current_task_btf)
const struct bpf_func_proto bpf_get_current_task_btf_proto = {
.func = bpf_get_current_task_btf,
.gpl_only = true,
- .ret_type = RET_PTR_TO_BTF_ID,
+ .ret_type = RET_PTR_TO_BTF_ID_TRUSTED,
.ret_btf_id = &btf_tracing_ids[BTF_TRACING_TYPE_TASK],
};

diff --git a/net/ipv4/bpf_tcp_ca.c b/net/ipv4/bpf_tcp_ca.c
index d15c91de995f..0006b5438ff7 100644
--- a/net/ipv4/bpf_tcp_ca.c
+++ b/net/ipv4/bpf_tcp_ca.c
@@ -61,7 +61,9 @@ static bool bpf_tcp_ca_is_valid_access(int off, int size,
if (!bpf_tracing_btf_ctx_access(off, size, type, prog, info))
return false;

- if (info->reg_type == PTR_TO_BTF_ID && info->btf_id == sock_id)
+ if (base_type(info->reg_type) == PTR_TO_BTF_ID &&
+ !(type_flag(info->reg_type) & ~PTR_TRUSTED) &&
+ info->btf_id == sock_id)
/* promote it to tcp_sock */
info->btf_id = tcp_sock_id;

diff --git a/tools/testing/selftests/bpf/verifier/calls.c b/tools/testing/selftests/bpf/verifier/calls.c
index e1a937277b54..7ac947f00df4 100644
--- a/tools/testing/selftests/bpf/verifier/calls.c
+++ b/tools/testing/selftests/bpf/verifier/calls.c
@@ -109,7 +109,7 @@
},
.prog_type = BPF_PROG_TYPE_SCHED_CLS,
.result = REJECT,
- .errstr = "arg#0 pointer type STRUCT prog_test_ref_kfunc must point",
+ .errstr = "arg#0 pointer had unexpected modifiers",
.fixup_kfunc_btf_id = {
{ "bpf_kfunc_call_test_acquire", 3 },
{ "bpf_kfunc_call_test_release", 5 },
diff --git a/tools/testing/selftests/bpf/verifier/ref_tracking.c b/tools/testing/selftests/bpf/verifier/ref_tracking.c
index fd683a32a276..d9367f2894b9 100644
--- a/tools/testing/selftests/bpf/verifier/ref_tracking.c
+++ b/tools/testing/selftests/bpf/verifier/ref_tracking.c
@@ -142,7 +142,7 @@
.kfunc = "bpf",
.expected_attach_type = BPF_LSM_MAC,
.flags = BPF_F_SLEEPABLE,
- .errstr = "arg#0 pointer type STRUCT bpf_key must point to scalar, or struct with scalar",
+ .errstr = "arg#0 pointer had unexpected modifiers",
.fixup_kfunc_btf_id = {
{ "bpf_lookup_user_key", 2 },
{ "bpf_key_put", 4 },
@@ -163,7 +163,7 @@
.kfunc = "bpf",
.expected_attach_type = BPF_LSM_MAC,
.flags = BPF_F_SLEEPABLE,
- .errstr = "arg#0 pointer type STRUCT bpf_key must point to scalar, or struct with scalar",
+ .errstr = "arg#0 pointer had unexpected modifiers",
.fixup_kfunc_btf_id = {
{ "bpf_lookup_system_key", 1 },
{ "bpf_key_put", 3 },
--
2.38.1
\
 
 \ /
  Last update: 2022-11-17 04:24    [W:0.297 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site