lkml.org 
[lkml]   [2022]   [Nov]   [16]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH 8/8] arm64: dts: qcom: sdm632: Add device tree for Motorola G7 Power
From


On 16/11/2022 15:56, Luca Weiss wrote:
> From: Gabriela David <ultracoolguy@disroot.org>
>
> Add device tree for the Motorola G7 Power (ocean) smartphone. This
> device is based on Snapdragon 632 (sdm632) SoC which is a variant of
> MSM8953.
>
> Signed-off-by: Gabriela David <ultracoolguy@disroot.org>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/sdm632-motorola-ocean.dts | 287 ++++++++++++++++++
> 2 files changed, 288 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index bed490c095dd..d125ea98ce3b 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -126,6 +126,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-discovery.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-pioneer.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm630-sony-xperia-nile-voyager.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm632-fairphone-fp3.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sdm632-motorola-ocean.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm636-sony-xperia-ganges-mermaid.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm660-xiaomi-lavender.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
> new file mode 100644
> index 000000000000..7ec7ec0ef2d5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm632-motorola-ocean.dts
> @@ -0,0 +1,287 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/dts-v1/;
> +
> +#include "sdm632.dtsi"
> +#include "pm8953.dtsi"
> +#include <dt-bindings/leds/common.h>
> +
> +/ {
> + model = "Motorola G7 Power";
> + compatible = "motorola,ocean", "qcom,sdm632";
> + chassis-type = "handset";
> + qcom,msm-id = <349 0>;
> + qcom,board-id = <0x141 0xc100>;
> + qcom,pmic-id = <0x10016 0x25 0x00 0x00>;
> +
> + backlight: backlight {
> + compatible = "led-backlight";
> + leds = <&led>;
> + };
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer@90001000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x90001000 0 (720 * 1520 * 3)>;
> +
> + width = <720>;
> + height = <1520>;
> + stride = <(720 * 3)>;
> + format = "r8g8b8";
> +
> + power-domains = <&gcc MDSS_GDSC>;
> +
> + clocks = <&gcc GCC_MDSS_AHB_CLK>,
> + <&gcc GCC_MDSS_AXI_CLK>,
> + <&gcc GCC_MDSS_VSYNC_CLK>,
> + <&gcc GCC_MDSS_MDP_CLK>,
> + <&gcc GCC_MDSS_BYTE0_CLK>,
> + <&gcc GCC_MDSS_PCLK0_CLK>,
> + <&gcc GCC_MDSS_ESC0_CLK>;
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_key_default>;
> +
> + key-volume-up {
> + label = "Volume Up";
> + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +
> + reserved-memory {
> + /delete-node/ memory@85b00000;
> +
> + memory@84300000 {
> + reg = <0x0 0x84300000 0x0 0x2000000>;
> + no-map;
> + };
> +
> + memory@90001000 {
> + reg = <0x0 0x90001000 0x0 (720 * 1520 * 3)>;
> + no-map;
> + };
> +
> + memory@eefa1800 {
> + reg = <0x00 0xeefa1800 0x00 0x5e800>;
> + no-map;
> + };
> +
> + ramoops@ef000000 {
> + compatible = "ramoops";
> + reg = <0x0 0xef000000 0x0 0xbf800>;
> + console-size = <0x40000>;
> + pmsg-size = <0x40000>;
> + record-size = <0x3f800>;
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +};
> +
> +&hsusb_phy {
> + vdd-supply = <&pm8953_l3>;
> + vdda-pll-supply = <&pm8953_l7>;
> + vdda-phy-dpdm-supply = <&pm8953_l13>;
> +
> + status = "okay";
> +};
> +
> +&i2c_3 {
> + status = "okay";
> +
> + touchscreen@41 {
> + compatible = "ilitek,ili2117";
> + reg = <0x41>;
> +
> + interrupt-parent = <&tlmm>;
> + interrupts = <65 IRQ_TYPE_EDGE_FALLING>;
> +
> + touchscreen-inverted-x;
> + };
> +};
> +
> +&i2c_5 {
> + status = "okay";
> +
> + led-controller@36 {
> + compatible = "ti,lm3697";
> + reg = <0x36>;
> +
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + led: led@1 {
> + reg = <1>;
> + default-trigger = "backlight";
> + function = LED_FUNCTION_BACKLIGHT;
> + led-sources = <0 1 2>;
> + };
> + };
> +};
> +
> +&pm8953_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + regulators {
> + compatible = "qcom,rpm-pm8953-regulators";
> +
> + vdd_l1-supply = <&pm8953_s3>;
> + vdd_l2_l3-supply = <&pm8953_s3>;
> + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
> + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
> + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
> +
> + pm8953_s3: s3 {
> + regulator-min-microvolt = <984000>;
> + regulator-max-microvolt = <1240000>;
> + };
> +
> + pm8953_s4: s4 {
> + regulator-min-microvolt = <1036000>;
> + regulator-max-microvolt = <2040000>;
> + };
> +
> + pm8953_l1: l1 {
> + regulator-min-microvolt = <975000>;
> + regulator-max-microvolt = <1050000>;
> + };
> +
> + pm8953_l2: l2 {
> + regulator-min-microvolt = <975000>;
> + regulator-max-microvolt = <1175000>;
> + };
> +
> + pm8953_l3: l3 {
> + regulator-min-microvolt = <925000>;
> + regulator-max-microvolt = <925000>;
> + regulator-allow-set-load;
> + };
> +
> + pm8953_l5: l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8953_l6: l6 { // other ocean models use l22 instead
/* C-style comments, please */
+ please clarify what it is used for
+ all the comments I made to the previous 6 DTs

Konrad
> + regulator-always-on;
> + regulator-boot-on;
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8953_l7: l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1900000>;
> + };
> +
> + pm8953_l8: l8 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + pm8953_l9: l9 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + pm8953_l10: l10 {
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <3000000>;
> + };
> +
> + pm8953_l11: l11 {
> + regulator-min-microvolt = <2950000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8953_l12: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + pm8953_l13: l13 {
> + regulator-min-microvolt = <3125000>;
> + regulator-max-microvolt = <3125000>;
> + };
> +
> + pm8953_l16: l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + pm8953_l17: l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + pm8953_l18: l18 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2700000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + pm8953_l19: l19 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1350000>;
> + };
> +
> + pm8953_l22: l22 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + };
> +
> + pm8953_l23: l23 {
> + regulator-min-microvolt = <975000>;
> + regulator-max-microvolt = <1225000>;
> + };
> + };
> +};
> +
> +&sdhc_1 {
> + vmmc-supply = <&pm8953_l8>;
> + vqmmc-supply = <&pm8953_l5>;
> +
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>;
> +
> + vmmc-supply = <&pm8953_l11>;
> + vqmmc-supply = <&pm8953_l12>;
> +
> + status = "okay";
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <96 4>;
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + dr_mode = "peripheral";
> +};

\
 
 \ /
  Last update: 2022-11-16 16:23    [W:0.646 / U:0.252 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site