lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    /
    Date
    From
    SubjectRe: [PATCH v3 12/14] serial: liteuart: add IRQ support for the RX path
    On Tue, Nov 15, 2022 at 06:21:00PM +0200, Ilpo Järvinen wrote:
    > On Tue, 15 Nov 2022, Gabriel L. Somlo wrote:
    >
    > > On Tue, Nov 15, 2022 at 06:00:11PM +0200, Ilpo Järvinen wrote:
    > > > On Sat, 12 Nov 2022, Gabriel Somlo wrote:
    > > >
    > > > > Add support for IRQ-driven RX. Support for the TX path will be added
    > > > > in a separate commit.
    > > > >
    > > > > Signed-off-by: Gabriel Somlo <gsomlo@gmail.com>
    > > > > ---
    > > > > drivers/tty/serial/liteuart.c | 61 +++++++++++++++++++++++++++++++----
    > > > > 1 file changed, 54 insertions(+), 7 deletions(-)
    > > > >
    > > > > diff --git a/drivers/tty/serial/liteuart.c b/drivers/tty/serial/liteuart.c
    > > > > index cf1ce597b45e..e30adb30277f 100644
    > > > > --- a/drivers/tty/serial/liteuart.c
    > > > > +++ b/drivers/tty/serial/liteuart.c
    > > > > @@ -6,6 +6,7 @@
    > > > > */
    > > > >
    > > > > #include <linux/console.h>
    > > > > +#include <linux/interrupt.h>
    > > > > #include <linux/litex.h>
    > > > > #include <linux/module.h>
    > > > > #include <linux/of.h>
    > > > > @@ -130,13 +131,29 @@ static void liteuart_rx_chars(struct uart_port *port)
    > > > > tty_flip_buffer_push(&port->state->port);
    > > > > }
    > > > >
    > > > > +static irqreturn_t liteuart_interrupt(int irq, void *data)
    > > > > +{
    > > > > + struct liteuart_port *uart = data;
    > > > > + struct uart_port *port = &uart->port;
    > > > > + u8 isr = litex_read8(port->membase + OFF_EV_PENDING);
    > > > > +
    > > > > + /* for now, only rx path triggers interrupts */
    > > >
    > > > Please don't add comment like this at all when your series removes it in a
    > > > later patch.
    > >
    > > OK, I will remove it in v4.
    > >
    > > > > + isr &= EV_RX;
    > > > > +
    > > > > + spin_lock(&port->lock);
    > > > > + if (isr & EV_RX)
    > > > > + liteuart_rx_chars(port);
    > > > > + spin_unlock(&port->lock);
    > > > > +
    > > > > + return IRQ_RETVAL(isr);
    > > > > +}
    > > > > +
    > > > > static void liteuart_timer(struct timer_list *t)
    > > > > {
    > > > > struct liteuart_port *uart = from_timer(uart, t, timer);
    > > > > struct uart_port *port = &uart->port;
    > > > >
    > > > > - liteuart_rx_chars(port);
    > > > > -
    > > > > + liteuart_interrupt(0, port);
    > > > > mod_timer(&uart->timer, jiffies + uart_poll_timeout(port));
    > > > > }
    > > > >
    > > > > @@ -162,19 +179,42 @@ static unsigned int liteuart_get_mctrl(struct uart_port *port)
    > > > > static int liteuart_startup(struct uart_port *port)
    > > > > {
    > > > > struct liteuart_port *uart = to_liteuart_port(port);
    > > > > + int ret;
    > > > > + u8 irq_mask = 0;
    > > > >
    > > > > - /* disable events */
    > > > > - litex_write8(port->membase + OFF_EV_ENABLE, 0);
    > > > > + if (port->irq) {
    > > > > + ret = request_irq(port->irq, liteuart_interrupt, 0,
    > > > > + KBUILD_MODNAME, uart);
    > > > > + if (ret == 0) {
    > > > > + /* only enable rx interrupts at this time */
    > > >
    > > > This comment seems pretty useless. Your code says very much the same.
    > >
    > > The comment was meant to let the reader know that the code is doing it
    > > *intentionally* (rather than forgetting to enable tx irqs by mistake).
    > > But I'm OK with removing this comment in v4 as well if you think
    > > that's an overly paranoid and redundant thing to do... :)
    >
    > I see. Reading the other comment first caused me to misinterpret this one
    > to mean that only RX interrupts are implemented.
    >
    > Maybe if you change "at this time" to "at startup" it would make it more
    > obvious.

    OK, I'll fix the comment per your suggestion rather than get rid of it.

    Thanks again,
    --G

    > --
    > i.

    \
     
     \ /
      Last update: 2022-11-15 17:26    [W:5.238 / U:0.240 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site