lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 00/12] Enable Display for SM8350
From


On 15/11/2022 12:17, Robert Foss wrote:
> Dependencies:
> https://lore.kernel.org/all/20221102231309.583587-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221024164225.3236654-1-dmitry.baryshkov@linaro.org/
> https://lore.kernel.org/all/20221104130324.1024242-5-dmitry.baryshkov@linaro.org/
>
Looks like only patches 0-3 reached linux-arm-msm and freedreno lists?

Konrad
> Branch:
> https://git.linaro.org/people/robert.foss/linux.git/log/?h=sm8350_dsi_v2
>
> This series implements display support for SM8350 and
> enables HDMI output for the SM8350-HDK platform.
>
> Changes from v1:
> - Added R-b tags from v1
> - Added qcom,sm8350-dpu binding patch
> - Added qcom,sm8350-mdss binding patch
> - Corrected sm8350.dtsi according to new dpu/mdss bindings
> - Bjorn: Removed regulator-always-on property from lt9611_1v2 regulator
> - Bjorn: Moved lt9611 pinctl pins into a common node
> - Bjorn/Krzysztof: Moved status property to last in node
> - Krzysztof: Changed hdmi-out to hdmi-connector
> - Krzysztof: Fixed regulator node name
> - Krzysztof: Changed &mdss to status=disabled as default
> - Krzysztof: Changed &mdss_mdp node name to display-controller
> - Krzysztof: Fixed opp-table node name
> - Krzysztof: Fixed phy node name
> - Dmitry: Split commit containing dpu & mdss compatibles string
> - Dmitry: Added msm_mdss_enable case
> - Dmitry: Fixed dpu ctl features
>
>
> Robert Foss (12):
> dt-bindings: display: msm: Add qcom,sm8350-dpu binding
> dt-bindings: display: msm: Add qcom,sm8350-mdss binding
> drm/msm/dpu: Refactor sc7280_pp location
> drm/msm/dpu: Add SM8350 to hw catalog
> drm/msm/dpu: Add support for SM8350
> drm/msm: Add support for SM8350
> arm64: dts: qcom: sm8350: Add &tlmm gpio-line-names
> arm64: dts: qcom: sm8350: Remove mmxc power-domain-name
> arm64: dts: qcom: sm8350: Use 2 interconnect cells
> arm64: dts: qcom: sm8350: Add display system nodes
> arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
> arm64: dts: qcom: sm8350-hdk: Enable lt9611uxc dsi-hdmi bridge
>
> .../bindings/display/msm/qcom,sm8350-dpu.yaml | 120 +++++++
> .../display/msm/qcom,sm8350-mdss.yaml | 240 +++++++++++++
> arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 332 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 226 +++++++++++-
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 210 ++++++++++-
> .../gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 +
> drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 +
> drivers/gpu/drm/msm/msm_mdss.c | 4 +
> 8 files changed, 1108 insertions(+), 26 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-dpu.yaml
> create mode 100644 Documentation/devicetree/bindings/display/msm/qcom,sm8350-mdss.yaml
>

\
 
 \ /
  Last update: 2022-11-15 14:26    [W:0.998 / U:0.004 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site