lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v3 10/13] phy: tegra: xusb: Disable trk clk when not in use
From


On 14/11/2022 12:40, Wayne Chang wrote:
> Pad tracking is a one-time calibration for Tegra186 and Tegra194.
> Clk should be disabled after calibration.
>
> Disable clk after calibration.
> While at it add 100us delay for HW recording the calibration value.
>
> Signed-off-by: Wayne Chang <waynec@nvidia.com>
> ---
> V2 -> V3:nothing has changed
> V1 -> V2:update the commit message.
> drivers/phy/tegra/xusb-tegra186.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/tegra/xusb-tegra186.c b/drivers/phy/tegra/xusb-tegra186.c
> index 0996ede63387..f121b4ffbbfd 100644
> --- a/drivers/phy/tegra/xusb-tegra186.c
> +++ b/drivers/phy/tegra/xusb-tegra186.c
> @@ -609,6 +609,10 @@ static void tegra186_utmi_bias_pad_power_on(struct tegra_xusb_padctl *padctl)
> value &= ~USB2_PD_TRK;
> padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
>
> + udelay(100);
> +
> + clk_disable_unprepare(priv->usb2_trk_clk);
> +
> mutex_unlock(&padctl->lock);
> }
>
> @@ -633,8 +637,6 @@ static void tegra186_utmi_bias_pad_power_off(struct tegra_xusb_padctl *padctl)
> value |= USB2_PD_TRK;
> padctl_writel(padctl, value, XUSB_PADCTL_USB2_BIAS_PAD_CTL1);
>
> - clk_disable_unprepare(priv->usb2_trk_clk);
> -
> mutex_unlock(&padctl->lock);
> }
>


Reviewed-by: Jon Hunter <jonathanh@nvidia.com>

Thanks
Jon

--
nvpublic

\
 
 \ /
  Last update: 2022-11-15 13:21    [W:0.234 / U:0.240 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site