lkml.org 
[lkml]   [2022]   [Nov]   [15]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 2/3] dt-bindings: iio: ad74413r: add optional reset-gpios
Date
The ad74412 and ad74413 devices have an active-low reset pin. Add a
binding allowing one to specify a gpio tied to that.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
---
Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml | 4 ++++
1 file changed, 4 insertions(+)

diff --git a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
index 03bb90a7f4f8..62f446dbc3d8 100644
--- a/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
+++ b/Documentation/devicetree/bindings/iio/addac/adi,ad74413r.yaml
@@ -51,6 +51,9 @@ properties:
Shunt (sense) resistor value in micro-Ohms.
default: 100000000

+ reset-gpios:
+ maxItems: 1
+
required:
- compatible
- reg
@@ -129,6 +132,7 @@ examples:
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;

refin-supply = <&ad74413r_refin>;
+ reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;

channel@0 {
reg = <0>;
--
2.37.2
\
 
 \ /
  Last update: 2022-11-15 10:56    [W:0.171 / U:0.020 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site