lkml.org 
[lkml]   [2022]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
SubjectRE: [PATCH] watchdog: rzg2l_wdt: Issue a reset before we put the PM clocks
Date


> -----Original Message-----
> From: Lad, Prabhakar <prabhakar.csengg@gmail.com>
> Sent: 14 November 2022 19:46
> To: Biju Das <biju.das.jz@bp.renesas.com>
> Cc: Geert Uytterhoeven <geert+renesas@glider.be>; Wim Van Sebroeck
> <wim@linux-watchdog.org>; Guenter Roeck <linux@roeck-us.net>; Philipp
> Zabel <p.zabel@pengutronix.de>; linux-watchdog@vger.kernel.org; linux-
> kernel@vger.kernel.org; linux-renesas-soc@vger.kernel.org; Fabrizio
> Castro <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev Lad
> <prabhakar.mahadev-lad.rj@bp.renesas.com>
> Subject: Re: [PATCH] watchdog: rzg2l_wdt: Issue a reset before we put
> the PM clocks
>
> HI Biju,
>
> Thank you for the review.
>
> On Mon, Nov 14, 2022 at 6:42 PM Biju Das <biju.das.jz@bp.renesas.com>
> wrote:
> >
> >
> >
> > > -----Original Message-----
> > > From: Prabhakar <prabhakar.csengg@gmail.com>
> > > Sent: 14 November 2022 18:09
> > > To: Geert Uytterhoeven <geert+renesas@glider.be>; Wim Van Sebroeck
> > > <wim@linux-watchdog.org>; Guenter Roeck <linux@roeck-us.net>;
> > > Philipp Zabel <p.zabel@pengutronix.de>;
> > > linux-watchdog@vger.kernel.org
> > > Cc: linux-kernel@vger.kernel.org; linux-renesas-
> soc@vger.kernel.org;
> > > Prabhakar <prabhakar.csengg@gmail.com>; Biju Das
> > > <biju.das.jz@bp.renesas.com>; Fabrizio Castro
> > > <fabrizio.castro.jz@renesas.com>; Prabhakar Mahadev Lad
> > > <prabhakar.mahadev- lad.rj@bp.renesas.com>
> > > Subject: [PATCH] watchdog: rzg2l_wdt: Issue a reset before we put
> > > the PM clocks
> > >
> > > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > >
> > > On RZ/Five SoC it was observed that setting timeout (to say 1 sec)
> > > wouldn't reset the system. To fix this we make sure we issue a
> reset
> > > before putting the PM clocks to make sure the registers have been
> cleared.
> > >
> > > While at it re-used rzg2l_wdt_stop() in rzg2l_wdt_set_timeout() as
> > > we were calling the same functions here.
> > >
> > > Signed-off-by: Lad Prabhakar
> > > <prabhakar.mahadev-lad.rj@bp.renesas.com>
> > > ---
> > > Note,
> > > - This patch has been tested on RZ/G2L, RZ/V2M and RZ/Five.
> > > - My initial investigation showed adding the delay after
> > > pm_runtime_get_sync()
> > > also fixed this issue.
> > > - Do I need add the fixes tag ? what should be the operation PUT-
> > > >RESET/RESET->PUT?
> >
> > It looks like timing issue, None of the previous devices are
> affected by this.
> >
> yep.
>
> > > in case we need the tag is:
> > > Fixes: 4055ee81009e6 ("watchdog: rzg2l_wdt: Add set_timeout
> > > callback")
> > > ---
> > > drivers/watchdog/rzg2l_wdt.c | 7 ++-----
> > > 1 file changed, 2 insertions(+), 5 deletions(-)
> > >
> > > diff --git a/drivers/watchdog/rzg2l_wdt.c
> > > b/drivers/watchdog/rzg2l_wdt.c index 00438ceed17a..d1271cc7750f
> > > 100644
> > > --- a/drivers/watchdog/rzg2l_wdt.c
> > > +++ b/drivers/watchdog/rzg2l_wdt.c
> > > @@ -115,16 +115,14 @@ static int rzg2l_wdt_stop(struct
> > > watchdog_device *wdev) {
> > > struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > >
> > > - pm_runtime_put(wdev->parent);
> > > reset_control_reset(priv->rstc);
> > > + pm_runtime_put(wdev->parent);
> > >
> > > return 0;
> > > }
> > >
> > > static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev,
> > > unsigned int
> > > timeout) {
> > > - struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
> > > -
> > > wdev->timeout = timeout;
> > >
> > > /*
> > > @@ -132,8 +130,7 @@ static int rzg2l_wdt_set_timeout(struct
> > > watchdog_device *wdev, unsigned int time
> > > * register so that it is updated with new timeout values.
> > > */
> >
> >
> > Maybe update the comment above with new code change.
> >
> /*
> * If the watchdog is active, reset the module for updating the
> WDTSET
> * register so that it is updated with new timeout values.
> */
>
> The above existing comment holds good with this code change. If you
> prefer something else please let me know I'll update it accordingly.

Maybe mention, The resetting of the module is done in wdt_stop function.

Cheers,
Biju
\
 
 \ /
  Last update: 2022-11-14 20:53    [W:1.891 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site