lkml.org 
[lkml]   [2022]   [Nov]   [14]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v2 5/6] phy: qcom-qmp-combo: fix runtime suspend
Date
Drop the confused runtime-suspend type check which effectively broke
runtime PM if the DP child node happens to be parsed before the USB
child node during probe (e.g. due to order of child nodes in the
devicetree).

Instead use the new driver data USB PHY pointer to access the USB
configuration and resources.

Fixes: 52e013d0bffa ("phy: qcom-qmp: Add support for DP in USB3+DP combo phy")
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 12 ++----------
1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index 17707f68d482..fde30205f332 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -2207,15 +2207,11 @@ static void qmp_combo_disable_autonomous_mode(struct qmp_phy *qphy)
static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
- struct qmp_phy *qphy = qmp->phys[0];
+ struct qmp_phy *qphy = qmp->usb_phy;
const struct qmp_phy_cfg *cfg = qphy->cfg;

dev_vdbg(dev, "Suspending QMP phy, mode:%d\n", qphy->mode);

- /* Supported only for USB3 PHY and luckily USB3 is the first phy */
- if (cfg->type != PHY_TYPE_USB3)
- return 0;
-
if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
@@ -2232,16 +2228,12 @@ static int __maybe_unused qmp_combo_runtime_suspend(struct device *dev)
static int __maybe_unused qmp_combo_runtime_resume(struct device *dev)
{
struct qcom_qmp *qmp = dev_get_drvdata(dev);
- struct qmp_phy *qphy = qmp->phys[0];
+ struct qmp_phy *qphy = qmp->usb_phy;
const struct qmp_phy_cfg *cfg = qphy->cfg;
int ret = 0;

dev_vdbg(dev, "Resuming QMP phy, mode:%d\n", qphy->mode);

- /* Supported only for USB3 PHY and luckily USB3 is the first phy */
- if (cfg->type != PHY_TYPE_USB3)
- return 0;
-
if (!qmp->init_count) {
dev_vdbg(dev, "PHY not initialized, bailing out\n");
return 0;
--
2.37.4
\
 
 \ /
  Last update: 2022-11-14 09:14    [W:0.085 / U:0.880 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site