lkml.org 
[lkml]   [2022]   [Nov]   [13]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
Patch in this message
/
From
Subject[PATCH v7 09/20] dt-bindings: PCI: dwc: Add interrupts/interrupt-names common properties
Date
Currently the 'interrupts' and 'interrupt-names' properties are defined
being too generic to really describe any actual IRQ interface. Moreover
the DW PCIe End-point devices are left with no IRQ signals. All of that
can be fixed by adding the IRQ-related properties to the common DW PCIe
DT-schemas in accordance with the hardware reference manual. The DW PCIe
common DT-schema will contain the generic properties definitions with just
a number of entries per property, while the DW PCIe RP/EP-specific schemas
will have the particular number of items and the generic resource names
listed.

Note since there are DW PCI-based vendor-specific DT-bindings with the
custom names assigned to the same IRQ resources we have no much choice but
to add them to the generic DT-schemas in order to have the schemas being
applicable for such devices. These names are marked as vendor-specific and
should be avoided being used in new bindings in favor of the generic
names.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Rob Herring <robh@kernel.org>

---

Changelog v3:
- This is a new patch unpinned from the next one:
https://lore.kernel.org/linux-pci/20220503214638.1895-2-Sergey.Semin@baikalelectronics.ru/
by the Rob' request. (@Rob)

Changelog v5:
- Add platform-specific interrupt names, but mark them as deprecated.

Changelog v6:
- Move the common interrupt-names definitions to the RP/EP schemas.
Thus drop the 'definitions' property. (@Rob)
- Drop the 'deprecated' keywords from the vendor-specific names. (@Rob)

Changelog v7:
- Drop the dtschema tool 'lib.py' fix chunk from under the '---' pattern.
(@Yoshihiro)
---
.../bindings/pci/snps,dw-pcie-common.yaml | 19 ++++
.../bindings/pci/snps,dw-pcie-ep.yaml | 52 +++++++++++
.../devicetree/bindings/pci/snps,dw-pcie.yaml | 90 ++++++++++++++++++-
3 files changed, 158 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
index e63c21783fc1..4646fb14e817 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-common.yaml
@@ -17,6 +17,25 @@ description:
select: false

properties:
+ interrupts:
+ description:
+ There are two main sub-blocks which are normally capable of
+ generating interrupts. It's System Information Interface and MSI
+ interface. While the former one has some common for the Host and
+ Endpoint controllers IRQ-signals, the later interface is obviously
+ Root Complex specific since it's responsible for the incoming MSI
+ messages signalling. The System Information IRQ signals are mainly
+ responsible for reporting the generic PCIe hierarchy and Root
+ Complex events like VPD IO request, general AER, PME, Hot-plug, link
+ bandwidth change, link equalization request, INTx asserted/deasserted
+ Message detection, embedded DMA Tx/Rx/Error.
+ minItems: 1
+ maxItems: 26
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 26
+
phys:
description:
There can be up to the number of possible lanes PHYs specified placed in
diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
index 71dd19ae1060..7d3f8fc8b7b4 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie-ep.yaml
@@ -41,6 +41,55 @@ properties:
items:
enum: [dbi, dbi2, config, atu, addr_space, link, atu_dma, appl]

+ interrupts:
+ description:
+ There is no mandatory IRQ signals for the normal controller functioning,
+ but in addition to the native set the platforms may have a link- or
+ PM-related IRQs specified.
+ minItems: 1
+ maxItems: 20
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 20
+ items:
+ oneOf:
+ - description:
+ Controller request to read or write virtual product data
+ from/to the VPD capability registers.
+ const: vpd
+ - description:
+ Link Equalization Request flag is set in the Link Status 2
+ register (applicable if the corresponding IRQ is enabled in
+ the Link Control 3 register).
+ const: l_eq
+ - description:
+ Indicates that the eDMA Tx/Rx transfer is complete or that an
+ error has occurred on the corresponding channel. eDMA can have
+ eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+ to 16 IRQ signals all together. Write eDMA channels shall go
+ first in the ordered row as per default edma_int[*] bus setup.
+ pattern: '^dma([0-9]|1[0-5])?$'
+ - description:
+ PCIe protocol correctable error or a Data Path protection
+ correctable error is detected by the automotive/safety
+ feature.
+ const: sft_ce
+ - description:
+ Indicates that the internal safety mechanism has detected an
+ uncorrectable error.
+ const: sft_ue
+ - description:
+ Application-specific IRQ raised depending on the vendor-specific
+ events basis.
+ const: app
+ - description:
+ Vendor-specific IRQ names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native "app" IRQ for details
+ enum: [ intr ]
+
max-functions:
maximum: 32

@@ -60,6 +109,9 @@ examples:
<0xd0000000 0x2000000>; /* Configuration space */
reg-names = "dbi", "dbi2", "addr_space";

+ interrupts = <23>, <24>;
+ interrupt-names = "dma0", "dma1";
+
phys = <&pcie_phy0>, <&pcie_phy1>, <&pcie_phy2>, <&pcie_phy3>;
phy-names = "pcie0", "pcie1", "pcie2", "pcie3";

diff --git a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
index 85861b71d9ff..fa1db57b2b97 100644
--- a/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/snps,dw-pcie.yaml
@@ -42,9 +42,92 @@ properties:
enum: [ dbi, dbi2, config, atu, atu_dma, app, appl, elbi, mgmt, ctrl,
parf, cfg, link, ulreg, smu, mpu, apb, phy ]

- interrupts: true
-
- interrupt-names: true
+ interrupts:
+ description:
+ DWC PCIe Root Port/Complex specific IRQ signals. At least MSI interrupt
+ signal is supposed to be specified for the host controller.
+ minItems: 1
+ maxItems: 26
+
+ interrupt-names:
+ minItems: 1
+ maxItems: 26
+ items:
+ oneOf:
+ - description:
+ Controller request to read or write virtual product data
+ from/to the VPD capability registers.
+ const: vpd
+ - description:
+ Link Equalization Request flag is set in the Link Status 2
+ register (applicable if the corresponding IRQ is enabled in
+ the Link Control 3 register).
+ const: l_eq
+ - description:
+ Indicates that the eDMA Tx/Rx transfer is complete or that an
+ error has occurred on the corresponding channel. eDMA can have
+ eight Tx (Write) and Rx (Read) eDMA channels thus supporting up
+ to 16 IRQ signals all together. Write eDMA channels shall go
+ first in the ordered row as per default edma_int[*] bus setup.
+ pattern: '^dma([0-9]|1[0-5])?$'
+ - description:
+ PCIe protocol correctable error or a Data Path protection
+ correctable error is detected by the automotive/safety
+ feature.
+ const: sft_ce
+ - description:
+ Indicates that the internal safety mechanism has detected an
+ uncorrectable error.
+ const: sft_ue
+ - description:
+ Application-specific IRQ raised depending on the vendor-specific
+ events basis.
+ const: app
+ - description:
+ DSP AXI MSI Interrupt detected. It gets de-asserted when there is
+ no more MSI interrupt pending. The interrupt is relevant to the
+ iMSI-RX - Integrated MSI Receiver (AXI bridge).
+ const: msi
+ - description:
+ Legacy A/B/C/D interrupt signal. Basically it's triggered by
+ receiving a Assert_INT{A,B,C,D}/Desassert_INT{A,B,C,D} message
+ from the downstream device.
+ pattern: "^int(a|b|c|d)$"
+ - description:
+ Error condition detected and a flag is set in the Root Error Status
+ register of the AER capability. It's asserted when the RC
+ internally generated an error or an error message is received by
+ the RC.
+ const: aer
+ - description:
+ PME message is received by the port. That means having the PME
+ status bit set in the Root Status register (the event is
+ supposed to be unmasked in the Root Control register).
+ const: pme
+ - description:
+ Hot-plug event is detected. That is a bit has been set in the
+ Slot Status register and the corresponding event is enabled in
+ the Slot Control register.
+ const: hp
+ - description:
+ Link Autonomous Bandwidth Status flag has been set in the Link
+ Status register (the event is supposed to be unmasked in the
+ Link Control register).
+ const: bw_au
+ - description:
+ Bandwidth Management Status flag has been set in the Link
+ Status register (the event is supposed to be unmasked in the
+ Link Control register).
+ const: bw_mg
+ - description:
+ Vendor-specific IRQ names. Consider using the generic names above
+ for new bindings.
+ oneOf:
+ - description: See native "app" IRQ for details
+ enum: [ intr ]
+ allOf:
+ - contains:
+ const: msi

clocks: true

@@ -70,6 +153,7 @@ examples:
bus-range = <0x0 0xff>;

interrupts = <25>, <24>;
+ interrupt-names = "msi", "hp";
#interrupt-cells = <1>;

reset-gpios = <&port0 0 1>;
--
2.38.1

\
 
 \ /
  Last update: 2022-11-13 20:18    [W:0.219 / U:0.092 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site