Messages in this thread | | | Date | Sat, 12 Nov 2022 10:43:14 +0300 | Subject | Re: [PATCH 17/22] phy: qcom-qmp-combo: merge USB and DP configurations | From | Dmitry Baryshkov <> |
| |
On 11/11/2022 11:56, Johan Hovold wrote: > It does not really make any sense to keep separate configuration > structures for the USB and DP parts of the same PHY so merge them. > > Signed-off-by: Johan Hovold <johan+linaro@kernel.org> > --- > drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++--------------- > 1 file changed, 57 insertions(+), 125 deletions(-) > > diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c > index b27d1821116c..249912b75964 100644 > --- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c > +++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c > @@ -798,10 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = { > > struct qmp_phy; > > -/* struct qmp_phy_cfg - per-PHY initialization config */ > struct qmp_phy_cfg { > - /* phy-type - PCIE/UFS/USB */ > - unsigned int type; > int lanes;
int lanes doesn't really make sense here in my opinion. It should be usb_lanes and dp_lanes.
> > /* Init sequence for PHY blocks - serdes, tx, rx, pcs */ > @@ -864,11 +861,6 @@ struct qmp_phy_cfg { > > }; > > -struct qmp_phy_combo_cfg { > - const struct qmp_phy_cfg *usb_cfg; > - const struct qmp_phy_cfg *dp_cfg; > -}; > - > /** > * struct qmp_phy - per-lane phy descriptor > * > @@ -1008,8 +1000,7 @@ static const char * const sc7180_usb3phy_reset_l[] = { > "phy", > }; > > -static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > +static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = { > .lanes = 2, > > .serdes_tbl = qmp_v3_usb3_serdes_tbl, > @@ -1020,20 +1011,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { > .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), > .pcs_tbl = qmp_v3_usb3_pcs_tbl, > .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), > - .clk_list = qmp_v3_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), > - .reset_list = sc7180_usb3phy_reset_l, > - .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l), > - .vreg_list = qmp_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > - .regs = qmp_v3_usb3phy_regs_layout, > - > - .has_pwrdn_delay = true, > -}; > - > -static const struct qmp_phy_cfg sc7180_dpphy_cfg = { > - .type = PHY_TYPE_DP, > - .lanes = 2, > > .dp_serdes_tbl = qmp_v3_dp_serdes_tbl, > .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl), > @@ -1058,15 +1035,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = { > .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx, > .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy, > .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate, > -}; > > -static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = { > - .usb_cfg = &sc7180_usb3phy_cfg, > - .dp_cfg = &sc7180_dpphy_cfg, > + .clk_list = qmp_v3_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), > + .reset_list = sc7180_usb3phy_reset_l, > + .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = qmp_v3_usb3phy_regs_layout, > + > + .has_pwrdn_delay = true, > }; > > -static const struct qmp_phy_cfg sdm845_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > +static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = { > .lanes = 2, > > .serdes_tbl = qmp_v3_usb3_serdes_tbl, > @@ -1077,25 +1058,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = { > .rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl), > .pcs_tbl = qmp_v3_usb3_pcs_tbl, > .pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl), > - .clk_list = qmp_v3_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), > - .reset_list = msm8996_usb3phy_reset_l, > - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = qmp_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > - .regs = qmp_v3_usb3phy_regs_layout, > - > - .has_pwrdn_delay = true, > -}; > > -static const struct qmp_phy_cfg sdm845_dpphy_cfg = { > - .type = PHY_TYPE_DP, > - .lanes = 2, > - > - .serdes_tbl = qmp_v3_dp_serdes_tbl, > - .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl), > - .tx_tbl = qmp_v3_dp_tx_tbl, > - .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl), > + .dp_serdes_tbl = qmp_v3_dp_serdes_tbl, > + .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl), > + .dp_tx_tbl = qmp_v3_dp_tx_tbl, > + .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl), > > .serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr, > .serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr), > @@ -1115,15 +1082,18 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = { > .configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx, > .configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy, > .calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate, > -}; > > -static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = { > - .usb_cfg = &sdm845_usb3phy_cfg, > - .dp_cfg = &sdm845_dpphy_cfg, > -}; > + .clk_list = qmp_v3_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l), > + .reset_list = msm8996_usb3phy_reset_l, > + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = qmp_v3_usb3phy_regs_layout, > > -static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > + .has_pwrdn_delay = true, > +}; > +static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = { > .lanes = 2, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > @@ -1136,21 +1106,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { > .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl), > .pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl, > .pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl), > - .clk_list = qmp_v4_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > - .reset_list = msm8996_usb3phy_reset_l, > - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = qmp_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > - .regs = qmp_v4_usb3phy_regs_layout, > - .pcs_usb_offset = 0x300, > - > - .has_pwrdn_delay = true, > -}; > - > -static const struct qmp_phy_cfg sc8180x_dpphy_cfg = { > - .type = PHY_TYPE_DP, > - .lanes = 2, > > .dp_serdes_tbl = qmp_v4_dp_serdes_tbl, > .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl), > @@ -1175,15 +1130,20 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = { > .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx, > .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy, > .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate, > -}; > > -static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = { > - .usb_cfg = &sm8150_usb3phy_cfg, > - .dp_cfg = &sc8180x_dpphy_cfg, > + .clk_list = qmp_v4_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .reset_list = msm8996_usb3phy_reset_l, > + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = qmp_v4_usb3phy_regs_layout, > + .pcs_usb_offset = 0x300, > + > + .has_pwrdn_delay = true, > }; > > -static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = { > - .type = PHY_TYPE_USB3, > +static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = { > .lanes = 2, > > .serdes_tbl = sc8280xp_usb43dp_serdes_tbl, > @@ -1194,19 +1154,6 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = { > .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl), > .pcs_tbl = sc8280xp_usb43dp_pcs_tbl, > .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl), > - .clk_list = qmp_v4_phy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > - .reset_list = msm8996_usb3phy_reset_l, > - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = qmp_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > - .regs = qmp_v4_usb3phy_regs_layout, > - .pcs_usb_offset = 0x300, > -}; > - > -static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = { > - .type = PHY_TYPE_DP, > - .lanes = 2, > > .dp_serdes_tbl = qmp_v5_dp_serdes_tbl, > .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl), > @@ -1231,15 +1178,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = { > .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx, > .configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy, > .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate, > -}; > > -static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = { > - .usb_cfg = &sc8280xp_usb43dp_usb_cfg, > - .dp_cfg = &sc8280xp_usb43dp_dp_cfg, > + .clk_list = qmp_v4_phy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l), > + .reset_list = msm8996_usb3phy_reset_l, > + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = qmp_v4_usb3phy_regs_layout, > + .pcs_usb_offset = 0x300, > }; > > -static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { > - .type = PHY_TYPE_USB3, > +static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = { > .lanes = 2, > > .serdes_tbl = sm8150_usb3_serdes_tbl, > @@ -1252,21 +1202,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { > .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl), > .pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl, > .pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl), > - .clk_list = qmp_v4_sm8250_usbphy_clk_l, > - .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l), > - .reset_list = msm8996_usb3phy_reset_l, > - .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > - .vreg_list = qmp_phy_vreg_l, > - .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > - .regs = qmp_v4_usb3phy_regs_layout, > - .pcs_usb_offset = 0x300, > - > - .has_pwrdn_delay = true, > -}; > - > -static const struct qmp_phy_cfg sm8250_dpphy_cfg = { > - .type = PHY_TYPE_DP, > - .lanes = 2, > > .dp_serdes_tbl = qmp_v4_dp_serdes_tbl, > .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl), > @@ -1291,11 +1226,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = { > .configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx, > .configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy, > .calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate, > -}; > > -static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = { > - .usb_cfg = &sm8250_usb3phy_cfg, > - .dp_cfg = &sm8250_dpphy_cfg, > + .clk_list = qmp_v4_sm8250_usbphy_clk_l, > + .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l), > + .reset_list = msm8996_usb3phy_reset_l, > + .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l), > + .vreg_list = qmp_phy_vreg_l, > + .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l), > + .regs = qmp_v4_usb3phy_regs_layout, > + .pcs_usb_offset = 0x300, > + > + .has_pwrdn_delay = true, > }; > > static void qmp_combo_configure_lane(void __iomem *base, > @@ -2720,10 +2661,7 @@ static int qmp_combo_probe(struct platform_device *pdev) > void __iomem *serdes; > void __iomem *usb_serdes; > void __iomem *dp_serdes = NULL; > - const struct qmp_phy_combo_cfg *combo_cfg = NULL; > const struct qmp_phy_cfg *cfg = NULL; > - const struct qmp_phy_cfg *usb_cfg = NULL; > - const struct qmp_phy_cfg *dp_cfg = NULL; > int num, id, expected_phys; > int ret; > > @@ -2734,13 +2672,10 @@ static int qmp_combo_probe(struct platform_device *pdev) > qmp->dev = dev; > dev_set_drvdata(dev, qmp); > > - combo_cfg = of_device_get_match_data(dev); > - if (!combo_cfg) > + cfg = of_device_get_match_data(dev); > + if (!cfg) > return -EINVAL; > > - usb_cfg = combo_cfg->usb_cfg; > - cfg = usb_cfg; /* Setup clks and regulators */ > - > usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0); > if (IS_ERR(serdes)) > return PTR_ERR(serdes); > @@ -2753,7 +2688,6 @@ static int qmp_combo_probe(struct platform_device *pdev) > if (IS_ERR(dp_serdes)) > return PTR_ERR(dp_serdes); > > - dp_cfg = combo_cfg->dp_cfg; > expected_phys = 2; > > mutex_init(&qmp->phy_mutex); > @@ -2792,7 +2726,6 @@ static int qmp_combo_probe(struct platform_device *pdev) > id = 0; > for_each_available_child_of_node(dev->of_node, child) { > if (of_node_name_eq(child, "dp-phy")) { > - cfg = dp_cfg; > serdes = dp_serdes; > > /* Create per-lane phy */ > @@ -2810,7 +2743,6 @@ static int qmp_combo_probe(struct platform_device *pdev) > goto err_node_put; > } > } else if (of_node_name_eq(child, "usb3-phy")) { > - cfg = usb_cfg; > serdes = usb_serdes; > > /* Create per-lane phy */
-- With best wishes Dmitry
| |