lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
From
Date
SubjectRe: [PATCH v1 8/9] arm64: dts: qcom: sm8350-hdk: Enable display & dsi nodes
On Sat, 29 Oct 2022 at 00:03, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 28/10/2022 08:08, Robert Foss wrote:
> > Enable the display subsystem and the dsi0 output for
> > the sm8350-hdk board.
> >
> > Signed-off-by: Robert Foss <robert.foss@linaro.org>
> > ---
> > arch/arm64/boot/dts/qcom/sm8350-hdk.dts | 22 ++++++++++++++++++++++
> > 1 file changed, 22 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > index e6deb08c6da0..6e07feb4b3b2 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > +++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
> > @@ -213,10 +213,32 @@ &cdsp {
> > firmware-name = "qcom/sm8350/cdsp.mbn";
> > };
> >
> > +&dispcc {
> > + status = "okay";
> > +};
> > +
> > +&dsi0 {
> > + status = "okay";
>
> Status is the last property.

Ack.

>
>
> Best regards,
> Krzysztof
>

\
 
 \ /
  Last update: 2022-11-11 16:19    [W:0.048 / U:0.036 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site