lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [PATCH v2 1/2] dt-bindings: soc: qcom: Add bindings for Qualcomm Ramp Controller
From
Il 04/11/22 18:54, Rob Herring ha scritto:
>
> On Fri, 04 Nov 2022 15:22:03 +0100, AngeloGioacchino Del Regno wrote:
>> Document bindings for the Qualcomm Ramp Controller, found on various
>> legacy Qualcomm SoCs.
>>
>> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
>> ---
>> .../qcom/qcom,msm8976-ramp-controller.yaml | 37 +++++++++++++++++++
>> 1 file changed, 37 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.yaml
>>
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,msm8976-ramp-controller.example.dtb: power-controller@b014000: '#power-domain-cells' is a required property
> From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/power-domain.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/patch/
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
>

I'm unsure about what I should do about this one.
This is a power-controller, but does *not* need any #power-domain-cells, as it is
standalone and doesn't require being attached to anything.

Any hints?

Thanks,
Angelo

\
 
 \ /
  Last update: 2022-11-11 11:05    [W:0.356 / U:0.060 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site