lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
    Patch in this message
    /
    From
    Subject[PATCH 01/14] dt-bindings: phy: qcom,qmp-usb3-dp: rename current bindings
    Date
    The current QMP USB3-DP PHY bindings are based on the original MSM8996
    binding which provided multiple PHYs per IP block and these in turn were
    described by child nodes.

    The QMP USB3-DP PHY block provides a single multi-protocol PHY and
    even if some resources are only used by either the USB or DP part of the
    device there is no real benefit in describing these resources in child
    nodes.

    The original MSM8996 binding also ended up describing the individual
    register blocks as belonging to either the wrapper node or the PHY child
    nodes.

    This is an unnecessary level of detail which has lead to problems when
    later IP blocks using different register layouts have been forced to fit
    the original mould rather than updating the binding. The bindings are
    arguable also incomplete as they only the describe register blocks used
    by the current Linux drivers (e.g. does not include the PCS_LANE
    registers).

    In preparation for adding new bindings for SC8280XP which further
    bindings can be based on, rename the current schema file after SC7180,
    which was the first supported platform, and add a reference to the
    SC8280XP bindings.

    Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
    ---
    ...3-dp-phy.yaml => qcom,sc7180-qmp-usb3-dp-phy.yaml} | 11 +++++++++--
    1 file changed, 9 insertions(+), 2 deletions(-)
    rename Documentation/devicetree/bindings/phy/{qcom,qmp-usb3-dp-phy.yaml => qcom,sc7180-qmp-usb3-dp-phy.yaml} (92%)

    diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
    similarity index 92%
    rename from Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
    rename to Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
    index 97a7ecafbf85..50b1fce530d5 100644
    --- a/Documentation/devicetree/bindings/phy/qcom,qmp-usb3-dp-phy.yaml
    +++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
    @@ -2,10 +2,17 @@

    %YAML 1.2
    ---
    -$id: "http://devicetree.org/schemas/phy/qcom,qmp-usb3-dp-phy.yaml#"
    +$id: "http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml#"
    $schema: "http://devicetree.org/meta-schemas/core.yaml#"

    -title: Qualcomm QMP USB3 DP PHY controller
    +title: Qualcomm QMP USB3 DP PHY controller (SC7180)
    +
    +description:
    + The QMP PHY controller supports physical layer functionality for a number of
    + controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
    +
    + Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
    + qcom,sc8280xp-qmp-usb43dp-phy.yaml.

    maintainers:
    - Wesley Cheng <quic_wcheng@quicinc.com>
    --
    2.37.4
    \
     
     \ /
      Last update: 2022-11-11 10:27    [W:4.056 / U:0.008 seconds]
    ©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site