lkml.org 
[lkml]   [2022]   [Nov]   [11]   [last100]   RSS Feed
Views: [wrap][no wrap]   [headers]  [forward] 
 
Messages in this thread
/
Date
SubjectRe: [RFC v3 02/11] arm64: dts: mt7986: add spi related device nodes
From


On 06/11/2022 09:50, Frank Wunderlich wrote:
> From: Sam Shih <sam.shih@mediatek.com>
>
> This patch adds spi support for MT7986.
>
> Signed-off-by: Sam Shih <sam.shih@mediatek.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---
> arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 35 ++++++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 28 ++++++++++++++++
> arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 35 ++++++++++++++++++++
> 3 files changed, 98 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> index 6189436fe31d..58f7e6b169bf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
> @@ -55,6 +55,20 @@ switch: switch@0 {
> };
>
> &pio {
> + spi_flash_pins: spi-flash-pins {
> + mux {
> + function = "spi";
> + groups = "spi0", "spi0_wp_hold";
> + };
> + };
> +
> + spic_pins: spic-pins {
> + mux {
> + function = "spi";
> + groups = "spi1_2";
> + };
> + };
> +
> uart1_pins: uart1-pins {
> mux {
> function = "uart";
> @@ -101,6 +115,27 @@ conf {
> };
> };
>
> +&spi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi_flash_pins>;
> + cs-gpios = <0>, <0>;
> + status = "okay";
> + spi_nand: spi_nand@0 {
> + compatible = "spi-nand";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> + spi-tx-buswidth = <4>;
> + spi-rx-buswidth = <4>;
> + };
> +};
> +
> +&spi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spic_pins>;
> + cs-gpios = <0>, <0>;
> + status = "okay";
> +};
> +
> &switch {
> ports {
> #address-cells = <1>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> index 226648f48df2..6d881095d933 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
> @@ -112,6 +112,34 @@ infracfg: infracfg@10001000 {
> #clock-cells = <1>;
> };
>
> + spi0: spi@1100a000 {
> + compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0 0x1100a000 0 0x100>;
> + interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&topckgen CLK_TOP_MPLL_D2>,
> + <&topckgen CLK_TOP_SPI_SEL>,
> + <&infracfg CLK_INFRA_SPI0_CK>,
> + <&infracfg CLK_INFRA_SPI0_HCK_CK>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
> + status = "disabled";
> + };
> +
> + spi1: spi@1100b000 {
> + compatible = "mediatek,mt7986-spi-ipm", "mediatek,spi-ipm";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + reg = <0 0x1100b000 0 0x100>;
> + interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&topckgen CLK_TOP_MPLL_D2>,
> + <&topckgen CLK_TOP_SPIM_MST_SEL>,
> + <&infracfg CLK_INFRA_SPI1_CK>,
> + <&infracfg CLK_INFRA_SPI1_HCK_CK>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk", "hclk";
> + status = "disabled";
> + };
> +
> topckgen: topckgen@1001b000 {
> compatible = "mediatek,mt7986-topckgen", "syscon";
> reg = <0 0x1001B000 0 0x1000>;
> diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> index 7459ddb6b6f0..7673aa3fa6ae 100644
> --- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
> @@ -96,6 +96,20 @@ fixed-link {
> };
>
> &pio {
> + spi_flash_pins: spi-flash-pins {
> + mux {
> + function = "spi";
> + groups = "spi0", "spi0_wp_hold";

Waiting on pinctrl binding:
https://patchwork.kernel.org/project/linux-mediatek/patch/20221106080114.7426-2-linux@fw-web.de/

Please resend once merged.

Regards,
Matthias

> + };
> + };
> +
> + spic_pins: spic-pins {
> + mux {
> + function = "spi";
> + groups = "spi1_2";
> + };
> + };
> +
> wf_2g_5g_pins: wf-2g-5g-pins {
> mux {
> function = "wifi";
> @@ -128,6 +142,27 @@ conf {
> };
> };
>
> +&spi0 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spi_flash_pins>;
> + cs-gpios = <0>, <0>;
> + status = "okay";
> + spi_nand: spi_nand@0 {
> + compatible = "spi-nand";
> + reg = <0>;
> + spi-max-frequency = <10000000>;
> + spi-tx-buswidth = <4>;
> + spi-rx-buswidth = <4>;
> + };
> +};
> +
> +&spi1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&spic_pins>;
> + cs-gpios = <0>, <0>;
> + status = "okay";
> +};
> +
> &uart0 {
> status = "okay";
> };

\
 
 \ /
  Last update: 2022-11-11 09:55    [W:0.228 / U:0.184 seconds]
©2003-2020 Jasper Spaans|hosted at Digital Ocean and TransIP|Read the blog|Advertise on this site